FEATURES / BENEFITS Designed to replace incandescent elevated heliport edge fixtures CLASS 1, DIV 2 Inherent safety capability; low electrical/thermal energy and high light output ELEVATED HELIPORT PERIMETER EDGE FIXTURE FAA TYPE L861H Suitable for all Class 1, Div 2, Groups A, B, C, D hazardous environments, T4 rated Unique optically designed olens to enhance LED operation and provide 360 visibility Weather/corrosion resistant lamp assembly and housing Self-contained wiring compartment eliminates additional boxes Easily interface to existing Helipad lighting circuits Can be operated steady or flashed (controller not supplied) Available as a single or dual unit Resistant to shock and vibration Lasts years longer than an icandescent 5 year warranty IP 66 / NEMA 4X rated Compliant To: FAA AC No. 150/5345-46B ICAO Annex 14 November 2004 US PATENT# 6,425,678 ETL Listed in compliance with: UL1598 and UL844 for use in Class 1, Div 2 Hazardous Locations APPLICATION The Dialight Visual Signal Light is an LED BASED Class 1, Division 2 certified fixture. Used for visual indication in hazardous environments, and to define the perimeter of the area required for helicopter landing and takeoff. OPERATING CONDITIONS OPERATING CONDITIONS Temperatures ranging from -67oF to +131oF (-55oC to +55oC). Will withstand wind in excess of 150 mph (240 kph), salt fog. Cast aluminum housing and stainless steel hardware. Electro-statically applied powdercoat of aviation orange paint. ELECTRICAL SPECIFICATIONS 120VAC UNITS 220VAC UNITS (60 Hz) Dialight Europe Ltd. Exning Road, Newmarket, England, CB8 0AX Tel: +44 (0) 1638 666541 • Fax: +44 (0) 1638 561735 www.dialight-obstruction-lights.com A Subsidiary of Dialight PLC VA 46.5 74 OPERATING VOLTAGE Min Nominal Max 92 120 132 198 220 265 Typ 14.5 14.5 WATTS (W) Max 17.5 17.5 AMPS 120mA 120mA Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 www.dialight.com MDTG861X001_A CLASS 1, DIV 2 ELEVATED HELIPORT PERIMETER EDGE FIXTURE FAA TYPE L861H MECHANICAL DIMENSIONS PHOTOMETRIC DATA 860 (Green) Shield Shield Lens Assembly 860 (Yellow & Red) 11.21 [284.6] REF Lens Assembly 14.21 [360.8] 14.77 [375.2] 11.77 [298.9] REF Dual Wire Housing BI-DIRECTIONAL WIRE HOUSING 5.79 [147] REF 15.54 [394.7] Dimensions are in inches [mm] ORDERING INFORMATION Single Units Double Units Single, Red Single, Green Single, Yellow (Amber) Single, Blue Single, White 860-2R0X-001 860-2G0X-001 860-2Y0X-001 860-2B0X-001 860-2W0X-001 Double, Red Double, Green Double, Yellow (Amber) Double, Blue Double, White (note: X indicates voltage input) (See Voltage Chart) (note: X indicates voltage input) (See Voltage Chart) Replacement Light Assemblies INPUT VOLTAGE CHART X = 1: X = 2: 860-2R0X-002 860-2G0X-002 860-2Y0X-002 860-2B0X-002 860-2W0X-002 Single, Red Single, Green Single, Yellow (Amber) Single, Blue Single, White 120 VAC 220 VAC 860-2R0X 860-2G0X 860-2Y0X 860-2B0X 860-2W0X (note: X indicates voltage input) (See Voltage Chart) WEIGHTS & MEASUREMENTS PART NUMBER Single Unit Dual Unit Dialight Europe Ltd. Exning Road, Newmarket, England, CB8 0AX Tel: +44 (0) 1638 666541 • Fax: +44 (0) 1638 561735 www.dialight-obstruction-lights.com A Subsidiary of Dialight PLC APPROX. SHIPPING WEIGHT 7.14 lbs 16.06 lbs CONTAINER DIMENSIONS 16” x 9” x 8” 22” x 17” x 9” Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 www.dialight.com MDTG861X001_A