FEATURES / BENEFITS 2-Row 9” high countdown digits are MUTCD compliant for crosswalks over 100 ft. COUNTDOWN PEDESTRIAN SIGNALS Full preemption compatibility... Reverts to it’s previous timing immediately following a preemption call Unique memory feature allows countdown time to remain stored internally, even when power is removed for extended periods of time Up to 4 units can be connected in parallel without disturbing the monitoring of the Hand/Person Automatically adjusts to traffic controller interval changes 90% reduction in power vs. incandescent Long life; up to 10 times longer than incandescent Sealed moisture resistant enclosure Lens available to fit most pedestrian heads Lens has a textured surface to reduce glare Easy to install into existing signal enclosure SPECIFICATIONS Operating Voltage Range: 80VAC to 135VAC (120VAC nominal) Meets FCC Title 47, Subpart B, Section 15 Regulations for electrical noise Fuse and transient suppressor incorporated for line and load protection Provided with quick connect terminals and spade adapters Written manufacturer’s warranty available on request Power Factor > 0.9 All products traceable by serial number Total Harmonic Distortion < 20% Turn-on/Turn-off Time for Hand/Person = 75 msec max Operating Temperature Range: -40°C to +74°C LED Colors: Countdown Numerals - Portland Orange Hand - Portland Orange Walking Person - Lunar White TYPICAL OPERATING CHARACTERISTICS TYPICAL WATTAGE @ 25oC SYMBOL Part Number Housing Size (inches) Countdown Hand 430-6479-001 16 x 18 2-Row Filled 430-7773-001 12 x 12 2-Row N/A Person Countdown Hand Person Filled 5 6 6 N/A 5 N/A N/A Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTSPCDX001_F