FORWARD VOLTAGE (V) TYP FORWARD CURRENT (mA) TYP LED EPOXY COLOR 559-0102-003F 5.0 10 RED DIFF. GaAsP 635 8.0 559-0103-003F 12.0 13 RED DIFF. GaAsP 635 8.0 559-0202-003F 5.0 12 GREEN DIFF. GaP 565 8.0 559-0203-003F 12.0 13 GREEN DIFF. GaP 565 8.0 DIALIGHT PART NUMBER LED CHIP REV LUMINOUS PEAK INTENSITY WAVELENGTH (mcd) (nm) TYP 559-0302-003F 5.0 10 YELLOW DIFF. GaAsP/GaP 583 8.0 559-0303-003F 12.0 13 YELLOW DIFF. GaAsP/GaP 583 8.0 559-1101-003F 1.8 2* RED DIFF. GaAsP/GaP 635 2.3 559-1201-003F 1.9 2* YELLOW DIFF. GaAsP/GaP 583 1.8 559-1301-003F 1.8 2* GREEN DIFF. GaP 565 1.8 559-2101-003F 2.2 10** RED DIFF. GaAsP/GaP 650 6.3 559-2201-003F 2.1 10** GREEN DIFF. GaP 563 10.0 559-2301-003F 2.0 10** YELLOW DIFF. GaAsP/GaP 585 10.0 559-2501-003F 1.9 10** ORANGE DIFF. GaAsP/GaP 600 7.0 ECN NO REVISIONS KLJ RP DATE MES 7-7-08 ADDED WIRE INSULATION O.D., STRIPPED LENGTH DIMENSION AND INCLUDED AJF KLJ "TYPE C MIL-W-168780" IN NOTE 2. B RoHS COMPLIANT 559-XX0X-003F DRN CKD APP NEW RELEASE A NO 7-24-09 Part Numbers with the "F" suffix ending are RoHS Compliant. Packaging is marked with "RoHS Compliant" label or equivalent markings. Parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260°C temp. for 5 sec. .281 [7,14] REF 5mm LED .210 [5,33] MAX .625 [15,88] MAX DIALCO 559-XXXX HOUSING (VALOX) BLACK WIRE .058 #.005 [1,47 #0,127] TYP. 6.000 #.125 [152,4 #3,18] RED WIRE ATTENTION: .50 #.03 [12,7 #0,76] OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES NOTES: 1. * REQUIRES EXTERNAL RESISTOR. ** REQUIRES EXTERNAL RESISTOR, MAX FORWARD D.C. CURRENT 7mA. 2 2. LEAD WIRES: #24 PVC 7/32 PRE-BONDED TYPE C MIL-W-168780. 3. RECOMMENDED MOUNTING HOLE: ANODE LEAD (+) CATHODE LEAD (-) 5. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART. PIN 2 LED SCHEMATIC PIN 1 CATHODE FRACTIONS: #1/64 DECIMALS (.XX): #.02 DECIMALS (.XXX): #.015 DECIMALS (.XXXX): #.0005 ANGLES: #3 $ REV DRAWING NUMBER ALL DIM'S IN: INCHES (MM) C-17617 TOLERANCES: UNLESS OTHERWISE SPECIFIED 4. LED LEAD DIMENSIONS SHOWN ARE MEASURED AT HOUSING EXIT. 7. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY, HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610. 1 SCALE: 4:1 .249-.252 ON PANELS .031-.062 THICK. 6. DIALIGHT PART NUMBERS: 559-XX0X-003F. THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT. TITLE B LED PANEL MOUNT INDICATOR RoHS COMPLIANT MATERIAL FINISH: 1501 ROUTE 34 SOUTH FARMINGDALE, NJ 07727 FSCM 83330 SHEET 1 OF 1 FAMILY TABLE: