CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS @Super low ESR, high ripple current capability @Lower profile than PSA (F8B8L to F10B12.5L) @Rated voltage range : 2.5 to 16Vdc @Nominal capacitance range : 270 to 2,700MF @Endurance : 2,000 hours at 105C @Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards @Added 2.5V 820MF (ESR 5mO max.) @RoHS Compliant Radial Lead PSC Low profile Lower ESR PSA ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105C Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note 2.5 to 16Vdc P20% (M) Rated voltageB1.15 I=0.2CV or 500MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) Dissipation Factor (tane) 0.10 max. Low Temperature Characteristics (Max.Impedance Ratio) Z(-25C)/Z(+20C)[1.15 Z(-55C)/Z(+20C)[1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. ?DIMENSIONS [mm] ?MARKING @Terminal Code : E FP0.5 EX) 2.5V820MF FD' Fd Coated Case L' 15min. 4min. Size code H08 fD 8.0 fd 0.6 F 3.5 fD' L' L+1.0max. HB5 JB5 8.0 10.0 0.8 (Note1) 0.8 (Note1) 5.0 3.5 FD+0.5max. L+1.5max. JC5 10.0 0.6 5.0 C 3D6 820 2.5V Note1 : 0.6 for rated volt 16V. (1/2) CAT. No. E1001K CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSC AAA E AA AAA M AAA S Supplement code (Note2) Size code Capacitance tolerance code Capacitance code (ex. 330MF:331, 1000MF:102) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category (Note2) PSC series, 2.5V820MF(ESR 5mO max.) has supplement code "J". Can case, terminal and terminal plating are the same as all others in PSC series. Please refer to "Product code guide (conductive polymer type)" ?STANDARD RATINGS WV(Vdc) 2.5 4 6.3 10 16 Cap(mF) Case size fDbL(mm) ESR (mo max/20c, 100k to 300kHz) Rated ripple current (mArms/105c, 100kHz) 560 820 820 1,000 1,000 1,500 2,700 560 680 1,000 470 560 820 1,500 390 680 270 330 470 8B8 8B8 8B8 8B8 8B11.5 8B11.5 10B11.5 8B8 8B11.5 10B11.5 8B8 8B8 10B11.5 10B11.5 8B11.5 10B11.5 8B11.5 10B12.5 10B11.5 7 5 7 7 7 7 8 7 7 6 8 8 7 10 9 7 11 10 10 6,100 6,100 6,100 6,100 6,100 6,100 5,560 6,100 6,100 6,640 5,700 5,700 6,640 5,560 5,650 6,100 5,080 6,100 6,100 Part No. APSC2R5ESS561MH08S APSC2R5ESS821MH08J APSC2R5ESS821MH08S APSC2R5ESS102MH08S APSC2R5ESS102MHB5S APSC2R5ESS152MHB5S APSC2R5ESS272MJB5S APSC4R0ESS561MH08S APSC4R0ESS681MHB5S APSC4R0ESS102MJB5S APSC6R3ESS471MH08S APSC6R3ESS561MH08S APSC6R3ESS821MJB5S APSC6R3ESS152MJB5S APSC100ESS391MHB5S APSC100ESS681MJB5S APSC160ESS271MHB5S APSC160ESS331MJC5S APSC160ESS471MJB5S SS : Enter the appropriate lead forming or taping code. (2/2) CAT. No. E1001K