MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For photo flash PH Series ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range -20 to +65℃ Rated Voltage Range Capacitance Tolerance Leakage Current 300, 315, 330Vdc -10 to +20% (V) I=1×C Where, I : Max. leakage current (µA), C : Nominal capacitance (µF) Dissipation Factor (tanδ) (at 20℃, 120Hz) (at 20℃ after 5 minutes) 0.06max. (at 20℃, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after charge and discharge are repeated 5,000 times at room temperature (5 to 35℃). Discharge resistance or Xenon tube : 0.7 to 1.0Ω. ≦±10% of the initial value Capacitance change ≦150% of the initial specified value D.F. (tanδ) Leakage current ≦150% of the initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 65℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. ≦±10% of the initial value Capacitance change ≦150% of the initial specified value D.F. (tanδ) Leakage current ≦150% of the initial specified value Charge and Discharge Characteristics Shelf Life ◆DIMENSIONS [mm] Code : E φD 6.0 to 7.5 8.0 to 8.5 9.0 to 9.5 10.0 to 14.0 14.5 to 18.0 0.6 0.6 0.5 0.6 0.8 φd 5 4 F 2.5 3.5 7.5 φD' φD+0.5max. L' L+1.0max. φD' φd Sleeve (PET : Black) F±0.5 ●Terminal L' Vent 15min. 4min. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E P H - A A A E A A A A A MA A A S ●Size Code Supplement code φD code (14th, 15th) φD code Size code (L code) φD(mm) 14th 15th Size code (φD code) 0 6.0 6 Nominal capacitance code (ex. 50µF:500,100µF:101) 5 6.5 6 Lead forming·taping code 0 7.0 7 Terminal code 5 7.5 7 Rated voltage code (ex. 315V:3B1,330V:331) 0 8.0 8 Series code 5 8.5 8 Category 0 9.0 9 Please refer to "Product code guide (radial lead type)" 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 9 A A B B C C D D E E F F G G H H J 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 L code (16th, 17th) L(mm) 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 L code 16th 17th 5 1 6 1 7 1 8 1 9 1 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2 9 2 0 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 3 0 4 1 4 2 4 3 4 4 4 5 4 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 200 CAT. No. E1001N MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For photo flash PHSeries ◆RATINGS (REFERENCE) WV (Vdc) 315 330 Cap (µF) Case size φD×L(mm) tanδ 86 122 144 209 80 114 137 194 10×30 10×40 12.5×30 12.5×40 10×30 10×40 12.5×30 12.5×40 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 Part No. EPH-3B1E□□860A030S EPH-3B1E□□121A040S EPH-3B1E□□1E1C530S EPH-3B1E□□211C540S EPH-331E□□800A030S EPH-331E□□1B1A040S EPH-331E□□1D1C530S EPH-331E□□1K1C540S □□ : Enter the appropriate lead forming or taping code. ●Products of vents on the sealing rubber DIMENSIONS[mm] <In the case of diameter 10mm> Lead Wire Vent f V F φD 10 V (4.6) f (1.8) F 5±0.5 Products of vent on rubber type, please make clearance about 1mm minimum between rubber and board. If it is difficult to make clearance 1mm minimum between rubber and board, please arrange gas escaping hole on the board (same position and 40% minimum diameter from the vent). The products of dual vents on rubber, requires placement one or two gas escaping hole on the board. ●Products of a vent on the case Please make the following open space over the vent so that the vent can operate correctly. Case diameter φ6 to 16mm φ16.5mm and up Clearance 2mm minimum 3mm minimum Above part numbers are only reference. Please consult with us about detail specifications (rated voltage, capacitance, case size, type of rubber, etc...). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 201 CAT. No. E1001N