RadiFit (Sizes 250 to 400) - ebm

Text for invitation to tender for
EC centrifugal fans – RadiFit
EC centrifugal fans – RadiFit
Sizes 250 to 400
Direct-drive dual-inlet centrifugal fans with backward-curved high-performance centrifugal impellers mounted
on a GreenTech EC external rotor motor with add-on control electronics.
Scroll housing made of galvanised sheet steel with bolted-on adjustable mounting bracket, optimised step diffuser in
discharge for low-noise operation, connection flange on pressure side.
Aluminium impeller with 7 backward-curved, offset, continuously welded blades. Flow-optimised inlet nozzle made of
galvanised sheet steel.
Motorised impeller balanced in two planes (static and dynamic) as per DIN ISO 1940 to balance quality G 6.3.
GreenTech EC external rotor motor surpasses efficiency class IE4, magnets without use of rare earths, maintenancefree ball bearings with long-term lubrication, theoretical nominal service life of at least 40,000 operating hours, soft
start, integrated current limitation, wide input voltage range 3-phase 380-480 V, 50/60 Hz, fan suitable for use with all
standard power supply systems with no effect on air performance. Motorised impeller isolated from surroundings with
specially designed vibration-absorbing elements, compact electronics, aluminium housing, low-noise commutation
logic; 100% speed control; PID controller; RS485/MODBUS RTU interface, no need for shielded wiring.
Readily accessible connection area with spring terminals, cable entry can be moved through 180 degrees,
environment-resistant cable glands.
Fan satisfies the relevant EMC regulations and requirements with regard to circuit feedback; documentation and
marking conform to the applicable EU directives.
Reliable performance data, air performance measurements on inlet-side chamber test rig in accordance with
ISO 5801 and DIN 24163, noise measurements in low-reflection acoustic test chamber as per DIN EN ISO 3745.
Integrated protective devices:
-
Alarm relay with floating contacts (250 V AC/2 A, cos φ = 1)
Locked-rotor protection
Phase failure detection
Motor soft start
Mains undervoltage detection
Excess temperature protection for electronics and motor
Short circuit protection
Optional:
-
Different requirements on request
Subject to change / As at 2015/04/01
ebm-papst Mulfingen GmbH & Co. KG
Bachmühle 2 ·74673 Mulfingen ·Phone: +49 7938 81-0 ·Fax: +49 7938 81-110 ·www.ebmpapst.com ·[email protected]
Text for invitation to tender for
EC centrifugal fans – RadiFit
Technical data:
Fan types
Air flow
Stat. pressure increase
Stat. overall efficiency
Operating speed
Motor type
Type of control
Motor efficiency class
Total power consumption
Specific fan power
Nominal voltage range
Mains frequency
Nominal current
Ingress protection
Sound power level
Sound pressure level (at 1 m)
Perm. ambient temperature
Fan mass
qV
p fs
η es
n
P ed
SFP
UN
f
IN
L W A(A, in)
L p A(A, in)
T
m
D3G ________ - ________ - _____
= ___________________________
= ___________________________
= ___________________________
= ___________________________
= EC motor
= 0-100% speed control
= IE4
= ___________________________
= ___________________________
= ___________________________
= 50 / 60
= ___________________________
= IP54
= _______ / L W A(A, out) = _______
= _______ / L p A(A, out) = _______
= ____________ to ____________
= ___________________________
m3/h
Pa
%
min-1
kW
kW/(m³/s)
V
Hz
A
dB(A)
dB(A)
°C
kg
Product photo
EC centrifugal fans – RadiFit D3G400
Refer to data sheet for dimensions and connections
Subject to change / As at 2015/04/01
ebm-papst Mulfingen GmbH & Co. KG
Bachmühle 2 ·74673 Mulfingen ·Phone: +49 7938 81-0 ·Fax: +49 7938 81-110 ·www.ebmpapst.com ·[email protected]