ADSL Magnetics For AMD AMDSL134 • • TM00301 Isolation transformers are designed to meet IEC 950 and UL 1950 safety requirements for supplementary insulation at 250V • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias Operating temperature range: -40° C to +85° C ELECTRICAL SPECIFICATIONS AT 25° C Part Number Application Turns Ratio ±2% Inductance1 µH Leakage Inductance µH max Line : Chip Line Side Line Side Line Side Package DCR Ω max Direct Capacitance pF Dielectric Rating Vrms typ Chip Side between Line & Chip between Line & Chip 0560-6600-C7 CO THT 2:1 410 3.5 0.64 0.4 65 max 1500 S560-6600-G1 CO SMD 2:1 410 3.5 0.64 0.4 65 max 1500 0560-6600-J4 CO2 THT 2:1 150 3.5 1.2 0.6 65 max 1500 0560-6600-M3 CPE THT 1:1 410 8 1.4 1.4 75 max 1500 0560-6600-H6 CPE2 THT 1:1 150 8 1.25 1.35 70 max 1500 1. measured at 10 kHz, 1 Vrms 2. ADSL over ISDN application INTEGRATED RECEIVE AND TRANSMIT TRANSFORMER PACKAGE Turns Ratio1 ± 2% Part Number Application S560-6600-D6 CPE DCR Ω max Inductance2 Dielectric Rating Package SMD (5-8) : (6-7) (9-10) : (8-4) (A-1) : (9-10) (A-2) : (6-7) (7-6) (9-10) (1-2) (8-4) (8-5) (9-10) (6-7) between (1-2) & (6-7) (1-2) & (4-5) (1-2) & (9-10) 2.25 0.444 2.25 0.562 620 µH 4 mH 2 0.7 0.4 1.3 0.7 1000 Vrms 1. 10 kHz, 1 Vrms 2. 10 kHz, 0.1 Vrms Turns Ratio1 ± 2% Part Number Application S560-6600-A6 CO DCR Ω max Inductance2 Dielectric Rating Package SMD (1-3) : (6-7) (5-3) : (10-9) (1-3) : (2-8) (5-3) : (4-8) (3-5) = (2-8) (3-1) = (8-4) (6-7) (1-3) = (8-4) (3-5) = (2-8) (10-9) between (1-5) & (6-7) (1-5) & (2-4) (1-5) & (10-9) 4.5 1.125 2.00 2.00 580 - 1.55 0.45 0.60 1.10 1500 Vrms 1. 10 kHz, 1 Vrms 2. 10 kHz, 0.1 Vrms ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-13 ADSL Magnetics For AMD AMDSL134 TM00301 SCHEMATIC 9 S560-6600-D6 S560-6600-A6 LINE 2 1 LINE 1 3 5 A RX 6 6 TX RX TX 7 7 10 10 9 2 8 4 4 8 5 Z BALANCE Z BALANCE 0560-6600-J4 0560-6600-H6 0560-6600-M3 0560-6600-C7 S560-6600-G1 1 10 4 7 2 9 5 6 LINE SIDE CHIP SIDE ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-14 ADSL Magnetics For AMD AMDSL134 TM00301 MECHANICAL SUGGESTED PCB PAD LAYOUT 5 1 S560-6600-G1 0.100 (2.54) 0.741 (18.82) 0.060 (1.52) 6 10 0.100 (2.54) 0.087 (2.21) 0.028 (0.71) 0.585 (14.86) MAX 0.540 (13.72) MAX 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX 1 5 0560-6600-C7 0560-6600-H6 0560-6600-J4 0560-6600-M3 6 10 0.550 (13.97) MAX 0.525 (13.34) MAX 0.500 (12.70) MAX 0.020 (0.508) SQ. TYP (PHOSPHER BRONZE, SOLDER COATED 0.110±0.010 (2.79±0.25) 0.394 (10.00) 0.098 (2.50) ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-15 ADSL Magnetics For AMD AMDSL134 TM00301 MECHANICAL S560-6600-A6 S560-6600-D6 0.750 (19.05) 0.560 (14.22) MAX 0.100 (2.54) TYP 0.055 (1.40) 0.555 (14.10) MAX 0.100 (2.54) SUGGESTED PCB PAD LAYOUT 0.394 (10.00) MAX 0.004 (0.10) 0.610 (15.49) 0.030 (0.76) 0.100 (2.54) TYP 10 EDGES 0.725 (18.42) MAX APPLICATION NOTES Bel has developed a complete magnetics solution to work with AMDs New AMDSL™ Chipset, AmDSL134 AmDSL135 two-chip Rate Adaptive ATM-based ADSL solution for central office (CO) or remote (CPE) applications, bel offer a magnetics solution for ADSL over POTS or ADSL over ISDN. Integrated Receive and Transmit Magnetic Hybrid Circuit Package In multi-port system applications, where board layout is limited Bel has designed a package that integrates receive and transmit transformers for the hybrid circuit (S560-6600-A6 & S560-6600-D6). These designs use toroidal magnetic cores for both receive and transmit transformers, the toroidal cores offer low cross talk features facilitating package integration, with optimum transmission characteristics and high radio frequency suppression due to shortest possible connection paths. Receive and Transmit Filter Inductors Bel offers a an extensive line of low profile inductors to be used on transmit or receive filters for CO, CPE, ADSL over POTS or ADSL over ISDN. These designs offer good immunity to EMI noise emissions offering flexibility in high density boards. For complete range of inductance values and structures refer to the ADSL Inductors Section. AmDSL™ is a trade mark of Advanced Micro Devices. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-16