REVISIONS NO. 1 2.0 • Note 6 2 1.5 +0.1/-0.0 DIA DESCRIPTION 18.0 was 18.45 DATE 2/16/94 Was Closed Tool BY RJB 7/1/94 T.S. 5/11/95 SDC 14.2 • Note 6 was 1 3 4.0 • See Note 1 28.4 •Note 6 A 0.30 ± 0.05 142 and 28.4 was 1.75 2.5 3 14.2 • Note 6 45 ° Bo 1 18.0 3 28.4 4.0 32.0 ± 0.3 Ko K1 16.0 SECTION A-A A Ao 0.20 ± 0.05 2.00 MIN 0.75 R A1 Notes: 1. 10 sprocket hole pitch cumulative tolerance 2. Camber not to exceed 1mm in 100mm 3. Material: Black Conductive Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. ± 0.2 Ao = 10.3 A 1 = 12.0 Bo = 20.2 Ko = 1.7 K 1 = 1.10 - All Dimensions in Millimeters TOLERANCES Advantek Part Number TSOP40-B TSOP40 Carrier Tape (EXCEPT AS NOTED) A DECIMAL ± 0.1 FRACTIONAL SCALE DRAWN BY CKS ± CHK'D DATE TRACED APP'D see Note 3 DRAWING NO. 7/13/92 ANGULAR ± MATERIAL 2:1 A0713-92-1 3