AV113-12LF - Skyworks Solutions, Inc.

DATA SHEET
AV113-12LF: HIP3™ Variable Attenuator 2.1 to 2.3 GHz
Features
 Low loss 1.4 dB typical
Control
Current
RF Out
 Attenuation 18 dB typical
 Good VSWR <1.5:1 typical
 Small SOIC-8 package
 For IMT-2000 applications
 MSL-1 @ 260 °C per JEDEC J-STD-020
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Control
Current
RF In
Y1306
Figure 1. AV113-12LF Functional Block Diagram
Description
The AV113-12 is a current controlled, variable attenuator from
Skyworks series of HIP3™ components. It is designed to meet
the wide dynamic range required in IMT-2000 applications. A
monolithic quadrature hybrid is teamed with a silicon PIN diode
pair in a plastic surface mount package, reducing size and
assuring consistency from part to part. AV113-12LF is packaged
in a lead (Pb)-free, fully RoHS-compliant SOIC-8 package.
Figure 1 shows the functional block diagram of the AV113-12LF.
The pinout is shown in Figure 2.
VCONTROL
680 Ω
220 pF
220 pF
22 nH
22 nH
8
GND
2
7
GND
GND
3
6
GND
5
RF Out
4
RF In
1
Control
Current
Control
Current
Y1328
Figure 2. AV113-12LF Pinout Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200263C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 29, 2014
1
DATA SHEET • AV113-12LF: HIP3™ VARIABLE ATTENUATOR
Electrical and Mechanical Specifications
Typical performance characteristics are shown in Figures 3
through 6.
The absolute maximum ratings for the AV113-12LF are shown in
Table 1. Electrical specifications are provided in Table 2, and
operating characteristics are shown in Table 3.
Table 1. AV113-12LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
RF input power
0.5 W CW, 4 W @
12.5% duty cycle
Control current
50 mA per diode
Units
mA
Operating temperature
TA
–40
+85
C
Storage temperature
TSTG
–65
+150
C
–10
V
125
V
Maximum reverse diode voltage
Electrostatic discharge:
ESD
Human Body Model (HBM), Class 0
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. AV113-12LF Electrical Specifications (Note 1)
(TOP = 25 °C, Unless Otherwise Noted)
Parameter
Minimum
Frequency
Typical
2.1
Insertion loss (0 mA control current)
1.4
Attenuation @ 1.0 mA control current
16.5
Maximum
Units
2.3
GHz
1.6
dB
18
VSWR all ports
1.5
Input 3rd order intercept point
+40
Group delay
0.4
dB
dBm
0.8
ns
Note 1: Performance is guaranteed only under the conditions defined in this table.
Table 3. AV113-12LF Operating Characteristics (Note 1)
(TOP = 25 °C, 0 V, 5 V,Unless Otherwise Noted)
Parameter
Condition
Minimum
Typical
Maximum
Units
5
8
2
μs
μs
mV
Switching characteristics (Note 2):
Rise, fall
On, off
Video feedthru (peak)
10/90% or 90/10% RF
50% CTL to 90/10% RF
Maximum input power for <1 dB
attenuation variation
+15
Note 1: All measurements made in a 50 Ω system, unless otherwise specified.
Note 2: 0 to 4 mA square wave total control current.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
August 29, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200263C
dBm
DATA SHEET • AV113-12LF: HIP3™ VARIABLE ATTENUATOR
Typical Performance Characteristics
0
0
-5
-5
-10
Loss (dB)
2.5 GHz
-15
-20
-25
2.1 GHz
-30
0.5 mA
-15
1.0 mA
-20
-25
1.5 mA
-35
-40
0
Y1330
1.7 GHz
Y1332
-30
-35
-40
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
1.7
Current (mA)
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
Frequency (GHz)
Figure 3. Attenuation vs Control Current
Figure 4. Attenuation vs Frequency
0
0
-5
-5
2.5 GHz
-20
2.1 GHz
-25
-30
-40
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Current (mA)
Figure 5. Input Return Loss vs Current Control
2.5 GHz
-15
-20
2.1 GHz
-25
1.7 GHz
-30
1.7 GHz
-35
-10
-35
Y1329
-15
Return Loss (dB)
-10
Y1331
Return Loss (dB)
Loss (dB)
-10
0 mA
-40
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Current (mA)
Figure 6. Output Return Loss vs Current Control
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200263C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 29, 2014
3
DATA SHEET • AV113-12LF: HIP3™ VARIABLE ATTENUATOR
Package and Handling Information
The recommended board layout for the AV113-12LF is shown in
Figure 7. Package dimensions for the device are shown in
Figure 8.
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The AV113-12LF is rated to Moisture Sensitivity Level 1 (MSL1)
at 260 C for 5 seconds. They can be used for lead or lead-free
soldering. For additional information, refer to the Skyworks
Application Note, Solder Reflow Information, document number
200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
0.1630
0.0200 Dia.
Via 4 Places
Y1333
0.0555 Typ.
0.0190 Typ.
Figure 7. AV113-12LF Recommended Board Layout
Pin 8
Pin 1
Indicator
Pin 1
0.068
(1.73 mm) Max.
0.197 (5.00 mm)
0.189 (4.80 mm)
0.010 (0.25 mm)
0.004 (0.10 mm)
0.050 (1.27 mm) BSC
0.244 (6.20 mm)
0.228 (5.80 mm)
0.020 (0.51 mm) Max.
0.049
(1.24 mm)
0.016
(0.41 mm)
0.016 Max.
(0.41 mm) x
45° Chamfer
0.158 (4.00 mm)
0.150 (3.80 mm)
0.010 (0.25 mm)
0.007 (0.17 mm)
8°
Max.
Y1316
Figure 8. AV113-12LF Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
August 29, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200263C
DATA SHEET • AV113-12LF: HIP3™ VARIABLE ATTENUATOR
Copyright © 2002-2007, 2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200263C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 29, 2014
5