LIEBERT® INTELLISLOT® WEB/485 CARD W ITH ADAPTER Product Specification / Installation Sheet Description The Liebert IntelliSlot Web/485 Card with Adapter (P/N IS-WEBADPT) provides 10/100baseT Ethernet network and Modbus connectivity for your Liebert equipment. Operating status is monitored and alarms are communicated via the network—using SNMP, BACnet IP (for Liebert DataMate and Liebert Mini-Mate) and/or HTTP protocols—and over RS-485 using the Modbus protocol. Additional Features • SNMP v1, v2c with MIB-II support • HTTP • Telnet • BootP, DHCP per RFC2131 • Remote firmware updates via HTTP • BACnet IP (for Liebert DataMate and Liebert Mini-Mate) Compatibility With Other Emerson Network Power Products Precision Cooling Unit (Controller—see selected codes*) Large UPS • Liebert Challenger 3000 *Controller Codes (L00, L15, LSM, LAM) L00: Level 00 • Liebert DataMate™ (L0B) L0B: Level 0B • Liebert Deluxe System/3™ L10: Level 10 (L10, L15, LSM, LAM) L15: Level 15 • Liebert Himod™ (LAM) • Liebert ICS™ (L10, LSM, LAM) LSM: Standard Microprocessor • Liebert Mini-Mate™ (L0B) LAM: Advanced • Liebert Mini-Mate2™ (MM2) Microprocessor • Liebert Mini-Mate2 8 Ton (L8T) • Hiross™ Microface IGMnet • Liebert Atlas PEC™, Liebert Atlas Air™, Liebert LECS15™, Liebert CEMS 100™ • • • • ™ Liebert Npower™ Liebert Series 300™ Liebert Series 600™/610™ (Single Module) Liebert Series 610 System Control Cabinet (Multi-Module) • Hiross 7200 (EMEA) • Hiross HiPulse™ (EMEA) Power Management • Liebert Datawave® • Liebert FPC™ • Liebert PPC™ Liebert Static Transfer Switches: • Liebert STS™ • Liebert STS2™ (3 pole) • Liebert STS2/PDU™ Overall and Mounting Dimensions 0.6" (15.3mm) 7" (177.8mm) 2.8" (71.1mm) 3.4" (86.4mm) 0.8" (20.3mm) Six holes, each 0.156" diameter 2.4" (61mm) 4" (101.6mm) 0.4" (10.2mm) 0.2" (5mm) 3.2" (81.3mm) 1 Customer Wiring Input power (input to TB3) Pin 1(+) Pin 2(-) Pin 3 (NC) Network port for NMS and Web access Modbus output for BMS (output from TB2) DTE serial port for configuration (requires null-modem connection) TB1: Pin 1 (+), Pin 2 (-) TB2: Pin 1 (+), Pin 2 (-) IGMnet or Liebert SiteScan® Comms from unit (input to TB1 or P1) Refer to user manual for details Specifications Power Requirements AC Inputs 18 - 24 VAC; 50/60 Hz DC Inputs 12 - 36VDC Power Consumption 6VA maximum Dimensions - W x D x H: in. (mm) Weight 7 x 4 x 1.5 (178 x 102 x 38) Net - oz. (kg) 7 (0.2) Shipping - lb. (kg) 1.3 (0.6) Ambient Operating Environment, °F (°C) 32 to 104 (0 to 40); 10% to 90% RH (non-condensing) Ambient Storage Temperature, °F (°C) -4 to 140 (-20 to 60) Protection Communication Ports SELV Isolated User Connections, Watchdog Timer Circuitry Service Terminal (RS-232) DB9F, DTE Unit Input Communications TB1, 2-Position Terminal Block P1, 20-PIN Vertical Header with Ejection Latches (for some UPS models) Modbus (RS-485) TB2, 2-Position Terminal Block Ethernet Communications RJ45 Wiring Specifications Connection Supported Wire Types Maximum Wire Length TB1 (RS-422) 18-22 AWG Stranded & Shielded; 18 AWG* recommended Non Plenum - Belden 9461; Plenum - Belden 88761 1000 ft. (300m) TB2 (RS-485) 18-22 AWG Stranded & Shielded; 18 AWG* recommended Non Plenum - Belden 9461; Plenum - Belden 88761 3000 ft. (915m) TB3 (Power Input) 18-22 AWG Stranded & Shielded; 18 AWG* recommended Non Plenum - Belden 8770; Plenum - Belden 88770 20 ft. (6m) DB9F Connector DTE Null Modem Cable 50 ft. (15m) RJ45 Connector Standard Category 5 Cable 328 ft. (100m) Liebert Corporation 1050 Dearborn Drive P.O. Box 29186 Columbus, OH 43229 Telephone: 1-800-877-9222 Facsimile: 1-614-841-6022 www.liebert.com © 2007 Liebert Corporation All rights reserved throughout the world. Specifications subject to change without notice. ® Liebert is a registered trademark of Liebert Corporation. All names referred to are trademarks or registered trademarks of their respective owners. SL-29105_REV4_09-11 2