E Ink Holdings Inc. PD080SL 5 Version : 0.2 T E CHNICA L MODE L SPE CIFICA T ION NO. : PD080SL 5 T he content of this information is subject to be changed without notice. Please contact PV I or its agent for further information. Customer’ s Confirmation Customer Date By PV I’ s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:1 E Ink Holdings Inc. PD080SL5 Revision History Rev. 0.1 0.2 Eng. 侯采君 侯采君 Issued Date September 24, 2010 Revised Content Preliminary Page 11 7-2) Recommended driving condition for LED backlight: Modify 120mA to 100 mA November 4,2010 Page 20 13-1)Specification Add LED life time 50000hrs(TYP). The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:2 E Ink Holdings Inc. PD080SL5 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Connections and Functions for Interface Pins Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Colors and Input Data Signals Block Diagram Input signal timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing PAGE 1 2 3 4 4 4 5 7 10 10 11 12 15 16 20 20 23 24 25 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:3 E Ink Holdings Inc. PD080SL5 1.Application This data sheet applies to a color TFT LCD module. The module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. Prime View assumes no responsibility for any damage resulting from the use of the device which dose not complies with the instructions and the precautions in these specification sheets. 2. Features . Amorphous silicon TFT LCD panel with LED backlight unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors：262,144 colors or 16,777,216 colors . High Brightness project . LVDS transmission interface 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 8 (diagonal) 800×(RGB)×600 262,144 162(H)×121.5 (V) 0.2025 (H)×0.2025 (V) Stripe 200(W)×152(H)×17.47(D) (typ.) TBD Middle power LED 18pcs Anti-Glare Normally white 6 ( Note 13-1 ) Unit inch dot mm mm mm g o’clock The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:4 E Ink Holdings Inc. PD080SL5 Reference drawing 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:5 E Ink Holdings Inc. BLU Barcode PVI Barcode Reference drawing PD080SL5 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:6 E Ink Holdings Inc. PD080SL5 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:7 E Ink Holdings Inc. PD080SL5 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:8 E Ink Holdings Inc. PD080SL5 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:9 E Ink Holdings Inc. PD080SL5 DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. 800 tc 640 tc DENB (tc: the period of sampling clock) 6. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Note 6-1: LVDS signal. Symbol VDD VIN MIN. -0.3 -0.3 MAX. +4.0 VDD+0.3 GND=0V, Ta=25℃ Unit Remark V V Note 6-1 7. Electrical Characteristics 7-1) Recommended Operating Conditions: Item Supply Voltage Current Dissipation Total power consumption LVDS Differential input high threshold LVDS Differential input low threshold Input voltage for DPS & FPC High signal Low Symbol Min. VDD 3.0 IDD 0.46 PDD VTH VTL -100 VIH 0.7VDD VIL 0 Typ. 3.3 153 0.51 - Max. 3.6 0.56 100 VDD 0.2VDD GND = 0V，Ta = 25℃ Unit Remark V mA Note 7-1 W mV Note 7-2 V V Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below. 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black IDD current dissipation testing pattern Note7-2 : Please refers to THC63LVDM83A specification by Thin Corporation. This LCD module conforms to LVDS standard. The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:10 E Ink Holdings Inc. PD080SL5 7-2) Recommended driving condition for LED backlight: Parameter Supply voltage of LED backlight Supply current of LED backlight Backlight Power Consumption Note 7-3 : ILED = 100mA,Constant Current. Symbol VLED1~6 ILED1~6 PLED Min - TYP (100) - MAX (11.4) (6.84) Unit V mA W Ta = 25℃ Remark Note 7-3 Note 7-4 Note 7-3 /Note 7-5 Note 7-4: The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 100mA * 6 = 600mA Note 7-5: PLED = VLED1 * ILED1 + VLED2 * ILED2…. + VLED5 * ILED5+VLED6 * ILED6 7-3) Backlight driving Connector type: JST BHSR-02VS-1, PIN No 2 pin Pin No 1 2 Symbol + - Description Input terminal (Anode) Input terminal (Cathode) Remark Wire color : Red Wire Color : Black 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 598 th Line RGBRGB RGB 599 th Line RGBRGBRGB 600 th Line RGB RGB The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:11 E Ink Holdings Inc. PD080SL5 9. Display Colors and Input Data Signals The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:12 E Ink Holdings Inc. PD080SL5 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:13 E Ink Holdings Inc. PD080SL5 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:14 E Ink Holdings Inc. PD080SL5 10. TFT-module Block Diagram SYSTEM +3.3V User signal input Timing Controller THC63LVDF64A 800*RGB*600 (PVI-2003A) Control VDD DC-DC Converter Gamma Generator AVDD Gamma Vcom Generator Vcom VGG / VEE FPC Source Driver IC 8" SVGA TFT-LCD Panel Gate Driver IC The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:15 E Ink Holdings Inc. PD080SL5 11. Input signal timing: DENB pin have high priority than SYNC mode(HSVC+VSYNC). When IC only use SYNC pin, DENB pin have to connect to ground. (A) Timing Specifications (DENB Mode): Item Symbol Frame Cycling Period t1 Vertical Display Period t2 Horizontal Scanning Time t3 Horizontal Display Period Clock Cycle Clock High Level Time Clock Low Level Time Hold time Set-up time t4 t5 t6 t7 t8 t9 Min. 604 X t3 14 600 X t3 920 X t5 24 800 X t5 20 9.0 9.0 4.0 5.0 Typ. 628X t3 16.58 600 X t3 1056 X t5 26.4 800 X t5 25.0 - Max. 800 X t3 20 600 X t3 1064 X t5 33 800 X t5 31.25 - Unit ms μs ns ns ns ns ns Remark (B) Timing Specifications (SYNC Mode) Item HSYNC Period Symbol Hp Min. 24 920 Display period Hdp 800 Pulse width Hpw 12 Back-porch Hbp 12 Front-porch Hfp 42 Hpw+Hbp 214 Hsync-CLK Hhc 10 Vsync-Hsync Hvh 0 VSYNC Period Vp 14 (Frame cycling period) 604 Display period Vdp 600 Pulse width Vpw 2 Back-porch Vbp 0 Front-porch Vfp 1 Vpw+Vbp 27 Note 1: Frame cycling period is optimum in 16.58ms.(60HZ) Typ. 26.4 1056 800 128 86 42 214 0 16.58 628 600 4 23 1 27 Max. 33 1064 800 202 202 42 214 Tc-10 200 20 800 600 27 25 1 27 Unit us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp Remark Note 1 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:16 E Ink Holdings Inc. PD080SL5 (C)Timing Chart: t1 t2 CLK t3 t3 DENB R5~R0 G5~G0 B5~B0 X,0 X,1 X,2 X,3 X,Y X,597 X,598 X,599 tc t3 t4 CLK DENB 796,Y 798,Y R5~R0 G5~G0 B5~B0 0,Y 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y X,Y 797,Y 799,Y The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:17 E Ink Holdings Inc. PD080SL5 Hp HSYNC Hpw Hdp Hbp Hfp R,G,B valid data CLK Hhc HSYNC HSYNC Hvh VSYNC The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:18 E Ink Holdings Inc. PD080SL5 Vp Vpw VSYNC Vdp Vbp Vfp R,G,B valid data t5 t6 t7 VIH(Min):0.8Vcc CLK VIL(Max):0.2Vcc t8 HYSNC VSYNC DENB R7-R0 G7-G0 B7-B0 t9 VIH(Min):0.8Vcc VALID DATA a Input Signal CenterLevel: 0.5Vcc VIL(Max):0.2Vcc b 0.5Vcc CLK Duty ( a ,b ) : 50 +10% The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:19 E Ink Holdings Inc. PD080SL5 12. Power On Sequence 3.0 V 0 s< t <35 m s 0 s< t <35 m s 3.0 V VDD Signal 2t 1 0<t 1 B acklight 1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (Hsync, Vsync, DENB, CLK, Data) low level or high impedance. 13. Optical Characteristics 13-1) Specification: Parameter Symbol θ Horizontal Viewing θ(to 12 o’clock) Angle Vertical θ(to 6 o’clock) Contrast Ratio Response Rise time Fall Luminance Uniformity White Chromaticity LED Life Time Cross Talk Ratio CR Tr Tf L U x y CTK Condition CR≥10 Optimum direction θ=0° φ=0° θ=0°/φ=0° θ=0°/φ=0° θ=0°/φ=0° 25℃ - MIN. (65) (50) (55) TYP. (70) (55) (60) MAX. - Unit deg deg deg (600) (700) - - 1000 (75) TBD TBD - (15) (25) 1200 (80) TBD TBD 50000 - (30) (50) TBD TBD 3.5 ms ms cd/㎡ % hrs % Ta = 25℃ Remarks Note 13-1 Note 13-2 Note 13-4 Note 13-3 Note 13-6 Note 13-3 Note 13-5 Note 13-7 The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:20 E Ink Holdings Inc. PD080SL5 Note 13-1：The definitions of viewing angles are as follows. LED connector θ 12 o’clock 3 o’clock 9 o’clock 6 o’clock φ Note 13-2 : The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 13-3：Topcon BM-7 (fast) luminance meter 1°field of view is used in the testing. Note 13-4: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 13-5: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25℃ and ILED =600mA. The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:21 E Ink Holdings Inc. PD080SL5 Note 13-6: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 25% 50% 75% 25% 50% 75% YA-YB ×100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Note 13-7: Cross Talk (CTK) = Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:22 E Ink Holdings Inc. PD080SL5 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and diets. d) Please follow the tear off direction as figure 14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass, which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. Figure 14-1 the way to peel off protective film The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:23 E Ink Holdings Inc. PD080SL5 15. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electron Static Discharge Test Condition Ta = +80℃, 240 hrs Ta = -25℃, 240 hrs Ta =+80℃, 240 hrs Ta = -25℃, 240 hrs Ta = +60℃, 90%RH, 240 hrs (No Condensation) -20℃+80℃, 100 Cycles 30 min 30 min Frequency：10 ~ 57 HZ , Amplitude：0.15 mm 58~500Hz, 1G Sweep time：11 min ; Test Period：3 hrs (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z 1 times for each direction C=150pF,R=330Ω Contact=±8KV，Air=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect, no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:24 E Ink Holdings Inc. PD080SL5 16. Packing TBD The information contained herein is the exclusive property of E Ink Holdings Inc. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:25