AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL ※ PART NO. : ATM0800D9(AZ DISPLAYS) VER1.0 APPROVAL COMPANY CHOP CUSTOMER COMMENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED BY Herbert CHECKED BY APPROVED BY ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 Document Revision History Change No. Date Subject And Reason Version No. 1 2015.05.08 First issue 1.0 Responser 2 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 Contents --. Cover .................................................................................................................................... 1 --. Document Revision History .................................................................................................. 2 --. Contents ............................................................................................................................... 3 1. GeneralSpecifications ........................................................................................................... 4 2. PinAssignment ...................................................................................................................... 5 3. OperationSpecifications ........................................................................................................ 8 3.1. AbsoluteMaximumRating ........................................................................................... 8 3.1.1. TypicalOperationConditions ................................................................................. 9 3.1.2. CurrentConsumption .......................................................................................... 10 3.1.3. BacklightDriving Conditions ............................................................................... 10 3.2. PowerSequence ....................................................................................................... 11 3.3. Timing Characteristics .............................................................................................. 12 3.3.1. ACElectrical Characteristics............................................................................... 12 3.3.2. DataInputFormat ................................................................................................ 13 3.3.3. Timing .................................................................................................................. 14 4. Optical Specifications .......................................................................................................... 15 5. ReliabilityTestItems ........................................................................................................... 19 6. GeneralPrecautions .......................................................................................................... 20 6.1. Safety ..................................................................................................................... 20 6.2. Handling ................................................................................................................... 20 6.3. Static Electricity ........................................................................................................ 20 6.4. Storage ..................................................................................................................... 20 6.5. Cleaning ..................................................................................................................... 20 7. Menchanical Drawing ....................................................................................................... 21 8. Packing Form.................................................................................................................... 22 3 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 1. General Specifications No. Item Specification Remark 1 LCDsize 8.0 inch(Diagonal) 2 Driverelement a-Si TFT active matrix 3 Resolution 800 × 3(RGB) × 600 4 Displaymode Normally White, Transmissive 5 Dotpitch 0.0675(W) × 0.2025(H) mm 6 Activearea 162.0(W) × 121.5(H) mm 7 Modulesize 183.0(W) × 141.0(H) × 6.4(D) mm Note 1 8 Surface treatment Anti-Glare 9 Color arrangement RGB-stripe 10 Interface Digital 11 Backlight power consumption 1.84W (Typ.) 12 Panel power consumption 0.356W(Typ.) 13 Weight TBD Note 1: Refer to Mechanical Drawing. 4 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 2. Pin Assignment 2.1. TFT LCD Panel Driving Section 1. FPC Connector is used for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hirose. PinNo. Symbol I/O Function 1 NC No connection 2 NC No connection 3 NC No connection 4 NC No connection 5 GND P Power ground 6 VCOM I Common voltage 7 VCC P Power for Digital circuit 8 MODE I DE/SYNC mode select 9 DE I Data Input Enable 10 VS I Vertical Sync Input 11 HS I Horizontal Sync Input 12 B7 I Blue data(MSB) 13 B6 I Blue data 14 B5 I Blue data 15 B4 I Blue data 16 B3 I Blue data 17 B2 I Blue data 18 B1 I Blue data 19 B0 I Blue data(LSB) 20 G7 I Green data (MSB) 21 G6 I Green data 22 G5 I Green data 23 G4 I Green data 24 G3 I Green data 25 G2 I Green data 26 G1 I Green data 27 G0 I Green data (LSB) 28 R7 I Red data (MSB) 29 R6 I Red data 30 R5 I Red data 31 R4 I Red data Remark Note3 5 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 32 R3 I Red data 33 R2 I Red data 34 R1 I Red data 35 R0 I Red data (LSB) 36 GND P Power ground 37 DCLK I Sample clock 38 GND P Power ground 39 L/R I Right/ left selection Note2,5 40 U/D I Up/down selection Note2,5 41 VGH P Gate ON voltage 42 VGL P Gate OFF voltage 43 AVDD P Power for Analog circuit 44 RESET I Global reset pin. 45 NC 46 VCOM I Common voltage 47 DITHB I Dithering function 48 GND P Power ground 49 NC Note1 No connection Note 4 No connection No connection 50 NC I: input, O: output, P: Power Note 1: Global reset pin. Active Low to enter Reset State. Suggest to connecting with an RC reset circuit for stability. Normally pull high. Note 2: Selection of scanning mode Setting of scan control input Scanning direction U/D R/L GND VCC Up to down, left to right VCC GND Down to up, right to left GND GND Up to down, right to left VCC VCC Down to up, left to right Note 3: DE/SYNC mode select, Normally pull high. H: DE mode. L: HS/VS mode. Note4: Dithering function enable control.Normally pull high. DITHB=“1”,Disable internal dithering function. For 18bit RGB interface, connect two LSB bits of all the R/G/B data buses to GND. DITHB=“0”,Enable internal dithering function, For TTL 24bit parallel RGB image data input. 6 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 Note 5: Definition of scanning direction. Refer to the figure as below: 2.2. LED backlight PIN NO SYMBOL FUNCTION 1 A Anode 2 K Cathode Note: Input connector:BHSR-02VS-1(JST) Outlet connector:SM02B-BHSS-1(JST) 7 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3. Operation Specifications 3.1. Absolute Maximum Rating (GND=AVSS=0V, Note 1) Values Item Power voltage Operation Temperature Storage Temperature LED Reverse Voltage LED Forward Current Symbol Unit Min. Max. VCC -0.3 5.0 V AVDD -0.5 13.5 V VGH 13.0 19.0 V VGL -12.0 -2.0 V VGH-VGL - 31.0 V TOP -20 70 ℃ TST -30 80 ℃ VR - 1.2 V IF - 25 mA Remark each LED Note 2 each LED Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed. Note 2: VR Conditions: Zener Diode 20mA 8 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3.1.1. Typical Operation Conditions (GND=AVSS=0V, Note 1) Values Item Power voltage Input signal voltage Input logic high voltage Input logic low voltage Symbol Unit Remark Note 2 Min. Typ. Max. VCC 3.0 3.3 3.6 V AVDD 10.2 10.4 10.6 V VGH 15.3 16.0 16.7 V VGL -7.7 -7.0 -6.3 V VCOM 2.8 3.8 4.8 V VIH 0.7VCC - VCC V VIL 0 - 0.3VCC V Note 4 Note 3 Note 1: Be sure to apply VCC and VGL to the LCD first, and then apply VGH. Note 2: VCC setting should match the signals output voltage (refer to Note 3) of customer’s system board . Note 3: DCLK,HS,VS,RSTB,UPDN,STLR,MODE,DITHB. Note 4: Typical VCOM is only a reference value, it must be optimized according to each LCM. Be sure to use VR; 9 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3.1.2. Current Consumption (GND=AVSS=0V) Values Item Symbol Unit Remark Min. Typ. Max. IGH - 0.2 0.5 mA VGH =16.0V IGL - 0.2 1.0 mA VGL = -7.0V ICC - 5.5 10.0 mA VCC =3.3V IAVDD - 32.0 50 mA AVDD =10.4V Current for Driver 3.1.3. Backlight Driving Conditions Values Item Symbol Min. Typ. Max. Unit Remark Note 1 Voltage for LED backlight VL 8.8 9.2 9.6 V Current for LED backlight IL 180 200 220 mA LED life time - 20,000 - - Hr Note 2 Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IL =200mA. Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25℃ and IL =200mA. The LED lifetime could be decreased if operating IL is lager than 200 mA. 10 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3.2. Power Sequence 3.2.1. Power on: VCC→VGL→VGH→Data→B/L 3.2.2. Power off: B/L→Data→VGH→VGL→VCC Note: Data include R0~R5, B0~B5, GO~G5, STLR,UPDN, DCLK, HS,VS,DE. 11 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3.3. Timing Characteristics 3.3.1. AC Electrical Characteristics Values Item Symbol Unit Min. Typ. Max. HS setup time Thst 8 - - Ns HS hold time Thhd 8 - - Ns VS setup time Tvst 8 - - Ns VS hold time Tvhd 8 - - Ns Data setup time Tdsu 8 - - Ns Data hole time Tdhd 8 - - Ns DE setup time Tesu 8 - - Ns DE hole time Tehd 8 - - Ns VDD Power On Slew rate TPOR - - 20 ms RSTB pulse width TRst 10 - - us CLKIN cycle time Tcoh 20 - - Ns CLKIN pulse duty Tcwh 40 50 60 % Output stable time Tsst - - 6 us Remark 12 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3.3.2. Timing Values Item Symbol Unit Min. Typ. Max. Horizontal Display Area thd - 800 - DCLK DCLK Frequency fclk - 40 50 MHz One Horizontal Line Th 862 1056 1200 DCLK thpw 1 - 40 DCLK HS Back Porch(Blanking) thb 46 46 46 DCLK HS Front Porch thfp 16 210 354 DCLK HS pulse width Remark Values Item Symbol Unit Min. Typ. Max. Vertical Display Area tvd - 600 - TH VS period time tv 624 635 700 TH VS pulse width tvpw 1 - 20 TH VS Back Porch(Blanking) tvb 23 23 23 TH VS Front Porch tvfp 1 12 77 TH Remark 13 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 3.3.3. Timing Diagram Figure 3.1 Input Clock and Data Timing Diagram Figure 3.2 Horizontal input timing diagram. 14 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 4. Optical Specifications Values Item Viewing angle (CR≥ 10) Symbol Condition Min. Typ. Max. θL Φ=180°(9 o’clock) 60 70 - θR Φ=0°(3 o’clock) 60 70 - Unit Remark degree Note 1 θT Φ=90°(12 o’clock) 60 70 - θB Φ=270°(6 o’clock) 40 50 - TON - 10 20 msec Note 3 TOFF - 15 30 msec Note 3 CR 400 500 - - Note 4 0.26 0.31 0.36 - WY 0.28 0.33 0.38 - Note 2 Note 5 Note 6 Luminance L 300 350 - cd/㎡ Note 6 Luminance uniformity YU 70 75 - % Note 7 Response time Contrast ratio WX Color chromaticity Normal θ=Φ=0° Test Conditions: 1. VCC=3.3V, IL=200mA (Backlight current), the ambient temperature is 25℃. 2. The test systems refer to Note 2. 15 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 Note 1: Definition of viewing angle range Fig. 4-1 Definition of viewing angle Note 2: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1° /Height: 500mm.) Fig. 4-2 Optical measurement system setup 16 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 Note 3: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. Fig. 4-3 Definition of response time Note 4: Definition of contrast ratio Luminance measured when LCD on the "White" state Contrast ratio (CR) = Luminance measured when LCD on the "Black" state Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: Definition of luminance: Measured at the center area of the panel when LCD panel is driven at “white” state. The LED driving condition is IL=200mA . 17 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 Note 7: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area. Bmin Luminance Uniformity (Yu) = Bmax L-------Active area length W----- Active area width Fig. 4-4 Definition of measuring points Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position. 18 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 5. Reliability Test Items Item (Note3) Test Conditions Remark High Temperature Storage Ta = 80℃ 240hrs Note 1，Note 4 Low Temperature Storage Ta = -30℃240hrs Note 1，Note 4 High Temperature Operation Ts = 70℃240hrs Note 2，Note 4 Low Temperature Operation Ta = -20℃240hrs Note 1，Note 4 Operate at High Temperature +40℃, 90%RH 240hrs Note 4 and Humidity -30℃/30 min ~ +80℃/30 min for a total 100 Thermal Shock cycles, Start with cold temperature and end Note 4 with high temperature. Frequency range:10~55Hz Stroke:1.5mm Vibration Test Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X. Y. Z. (6 hours for total) 100G 6ms,±X, ±Y, ±Z 3 times for each Mechanical Shock direction Random Vibration : 0.015G*G/Hz from 5-200HZ, -6dB/Octave Package Vibration Test from 200-500HZ 2 hours for each direction of X. Y. Z. (6 hours for total) Height:60 cm Package Drop Test 1 corner, 3 edges, 6 surfaces Electro Static Discharge ± 2KV, Human Body Mode, 100pF/1500Ω Note 1: Ta is the ambient temperature of samples. Note 2: Ts is the temperature of panel’s surface. Note 3: In the standard condition, there shall be no practical problem that may affect the display function. After the reliability test, the product only guarantees operation, but don’t guarantee all of the cosmetic specification. Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature. 19 AZ DISPLYAS ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 6. General Precautions 6.1. Safety Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 6.2. Handling 1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface. 2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages. 3. To avoid contamination on the display surface, do not touch the module surface with bare hands. 4. Keep a space so that the LCD panels do not touch other components. 5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages. 6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs. 7. Do not leave module in direct sunlight to avoid malfunction of the ICs. 6.3. Static Electricity 1. Be sure to ground module before turning on power or operating module. 2. Do not apply voltage which exceeds the absolute maximum rating value. 6.4. Storage 1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less. 2. Do not store the module in surroundings containing organic solvent or corrosive gas. 3. Store the module in an anti-electrostatic container or bag. 6.5. Cleaning 1. Do not wipe the polarizer with dry cloth. It might cause scratch. 2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer. 20 AZ DISPLYAS AZ DISPLYAS 1.Unit:mm 2.Do not scale drawing. 3.All radii without dimension R0.2 ° 0 . 1 e l g n a t f a r d . 4 A (71) : e c n a r e l o T l a r 2 . 0 approximately 1 2 8. RoHs must be complied.(Use Lead-free process) 3 d=0.15 25.50± 0.10 P0.5*(50-1)=24.5 ± 0.05 DETAIL A 4 70.50± 0.50 7. "*" For important dimension;( ) for reference dimention 6. Mark mold cavity indentification in recess where indicated. ± W=0.50± 0.10 50 (60.00) Notes: 1 Resolution:800(XRBG) 4 9.75 91.33± 0.50 91.50± 0.50 Display center 162.00(Active Area) 164.80± 0.30(Bezel Opening) 183.00± 0.30(Module Outline) 3 8.35 121.50(Active Area) RoHS (90) 10.50 9.10 2 124.30± 0.30(Bezel Opening) B C D 1 DETAIL A SCALE 4:1 5 5 0.30± 0.05 6.40± 0.30 6 6 7 7 8 8 A B C D ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 7. Mechanical Drawing 5.00± 0.30 (Stiffener) 141.00± 0.30(Module Outline) 3.80± 0.30 21 ATM0800D9(AZ DISPLAYS) TFT MODULE V1.0 8. Packing form 8” 16 22 AZ DISPLYAS