PD050VL1 Version :4.0 TECHNICAL MODEL SPECIFICATION NO : PD050VL1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PD050VL1 Revision History Rev. 1.0 Issued Date May 7, 2007 2.0 Mar 12, 2008 3.0 4.0 Revised New Delete Page4 2. Features: Image Reversion : Up/Down and Left/Right Add March.24.2008 Page 19 14.Handling Cautions 14-1 item e) Aug. 18,2009 Modified Page 22 16.Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PD050VL1 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing Diagram PAGE 1 2 3 4 4 4 5 7 9 9 10 11 12 13 16 16 19 21 22 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PD050VL1 1. Application PD050VL1 module applies to computer peripheral, industrial meter, car TV, image communication and multi-media, which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. 2. Features. . Support the DENB mode, Sync mode (Hsync+Vsync) . Pixel in stripe configuration . Slim and compact . Amorphous silicon TFT LCD panel with LED B/L . LVDS transmission interface 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Back-light Weight Surface treatment Display mode Gray scale inversion direction Specifications 5(diagonal) 640ͪ(R,G,B )ͪ480 262K 101.76 (H)ͪ74.88(V) 0.159(H)ͪ0.156(V) Stripe 120.7(H)ͪ92.8(V)Ø12.5(D) (Typ.) 24-LED 173.6+10 Anti-glare and SWV film Normally white 6 (ref to Note 13-1 ) Unit inch dot mm mm mm g o’clock The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PD050VL1 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PD050VL1 ʳ Outline Drawing : Rear View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PD050VL1 5.Input Terminals 5-1) TFT-LCD Panel Driving Connector type: DFL19K-20P-1H(HRS) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol Vcc Vcc GND GND INOINO+ GND IN1IN1+ GND IN2IN2+ GND CLKCLK+ GND NC NC GND GND Function +3.3V Power Supply +3.3V Power Supply Ground Ground LVDS receiver signal channel 0 LVDS receiver signal channel 0 Ground LVDS receiver signal channel 1 LVDS receiver signal channel 1 Ground LVDS receiver signal channel 2 LVDS receiver signal channel 2 Ground LVDS receiver signal clock LVDS receiver signal clock Ground No connection No connection Ground Ground Remark LVDS Interface Block Diagram B0~B5 TIN12~TIN17 Hsync TIN18 Vsync TIN19 DENB TIN20 CLK IN TCLK IN IN0+ IN1IN1+ IN2IN2+ CLK - PLL THC63LVDM 63A Customer system side IN0- CLK + PLL RxOUT0~RxOUT5 RxOUT6~RxOUT11 RxOUT12~RxOUT17 RxOUT18 RxOUT19 RxOUT20 LCD Internal Circuit TIN6~TIN11 LVDS to TTL parallel G0~G5 TIN0~TIN5 TTL parallel to LVDS Graphic Controller Circuit R0~R5 CLK OUT THC63LVDF64A PD050VL1 m odule side The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PD050VL1 Recommended Transmitter (THC63LVDM63A Thane) to PD050VL1 interface Assignment: Input terminal of THC63LVDM63A Graphic controller output signal Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN5 TIN6 TIN7 TIN8 TIN9 TIN10 TIN11 TIN12 TIN13 TIN14 TIN15 TIN16 TIN17 TIN18 TIN19 TIN20 No. 44 45 47 48 1 3 4 6 7 9 10 12 13 15 16 18 19 20 22 23 25 Symbol R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 Hsync Vsync DENB CLK in 26 CLK To PD050VL1 Output signal interface terminal symbol (Symbol) Function Red pixel data (LSB) Red pixel data Red pixel data Red pixel data Red pixel data Red pixel data(MSB) Green pixel data (LSB) Green pixel data Green pixel data Green pixel data Green pixel data Green pixel data(MSB) Blue pixel data(LSB) Blue pixel data Blue pixel data Blue pixel data Blue pixel data Blue pixel data(MSB) Horizontal Synchronous Signal Vertical Synchronous Signal Compound Synchronization signal Data sampling clock Tout0- No.5 : IN0- Tout0+ No.6 : IN0+ Tout1- No.8 : IN1- Tout1+ No.9 : IN1+ Tout2- No.11 : IN2- Tout2+ N0.12 : IN2+ TCLK outTCLK out+ No.14 : CLKЁ No.15 : CLKЀ DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. ˋ˃˃ʳ̇˶ ˉˇ˃ʳ̇˶ ˗˘ˡ˕ (tc: the period of sampling clock) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PD050VL1 5-2) Backlight driving Connector type: JST BHSR-02VS-1, PIN No 2 pin Pin No 1 2 Symbol + - Description Input terminal (Positive electrode side) Input terminal (Ground side) Remark Wire color : Red Wire Color : Black 6. Absolute Maximum Ratings : The followings are maximum values, which if exceeded, may cause faulty operation or damage to the unit. GND=0V, Ta=25ʚ Parameters Symbol MIN. MAX. Unit Remark Supply Voltage VCC -0.3 +7.0 V Input Signals Voltage Vsig -0.3 VCC+0.3 V Note 6-1 Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5]. 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol Supply Voltage Vcc Current Dissipation Icc LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Vcom Voltage Vcom Min. 3.0 -100 - Typ. 3.3 77.90 2.7 GND = 0VΔTa = 25к Max. Unit Remark 3.6 V mA Note 7-1 100 mV Note7-2 V Note 7-1 : To test the current dissipation of VCC using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black Idd current dissipation testing pattern Note7-2 : Please refers to THC63LVDF64A specification by THINE Corporation. This LCD module conforms to LVDS standard. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PD050VL1 7-2) Recommended driving condition for LED backlight GND = 0VΔTa = 25к Parameter Symbol Min TYP MAX Unit Remark Supply voltage of LED backlight VLED 11.0 11.5 V IL = 20 mA Supply current of LED backlight ILED 20 mA Note 7-3 Backlight Power Consumption PLED 1.76 1.84 W Note 7-4 Note 7-3: The LED driving condition is defined for each LED module. (3 LED Serial) Note 7-4: PLED = VLED1 * ILED1 + VLED2 * ILED2…. + VLED7 * ILED7+VLED8 * ILED8 Anode Cathode 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PD050VL1 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ʆ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ʆ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ʆ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PD050VL1 10. Block Diagram 10-1) TFT-module Block Diagram ˦ˬ˦˧˘ˠ ʾˆˁˆ˩ ˨̆˸̅ ̆˼˺́˴˿ʳ ˼́̃̈̇ ˧˼̀˼́˺ʳ˖̂́̇̅̂˿˿˸̅ THC63LVDF64A ʻˣ˩˜ˀ˅˃˃ˆ˔ʼ ˩˼˷˸̂ ˖̂́̇̅̂˿ ˩˗˗˄ ˗˖ˀ˗˖ʳ ˖̂́̉˸̅̇˸̅ ˚˴̀̀˴ ˚˸́˸̅˴̇̂̅ ˩˶̂̀ ˚˸́˸̅˴̇̂̅ ˩˚˚ʳ˂ʳ˩˘˘ ˩˗˗˅ ˚˴̀̀˴ ˙ˣ˖ ˦̂̈̅˶˸ ˗̅˼̉˸̅ ˜˖ ˈʵ˩˚˔ ˧˙˧ˀ˟˖˗ʳˣ˴́˸˿ ˩˶̂̀ ˚˴̇˸ʳ˗̅˼̉˸̅ʳ˜˖ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PD050VL1 11. Interface Timing 11-1) Timing Parameters Power supply CLK Frequency Period Display period Pulse width HSYNC Back-porch Front-porch Hpw+Hbp Hsync-CLK Vsync-Hsync Period Display period VSYNC Pulse width Back-porch Front-porch Vpw+Vbp Horizontal scanning period Horizontal display period DENB Vertical display period Frame cycling period CLK-DATA R,G,B DATA-CLK Symbol VCC 1/tc tc Min. 3.0 10 0 - Typ. 3.3 25 40 32 800 640 96 46 18 142 0 16.8 525 480 2 33 10 35 Max. 3.6 Tc-10 200 - Unit V MHz ns us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp T1 - 800 - tc T2 - 640 - tc T3 - 480 - T1 T4 520 525 800 T1 Dcd Ddc 10 8 - - ns ns Hp Hdp Hpw Hbp Hfp Hhc Hvh Vp Vdp Vpw Vbp Vfp The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PD050VL1 11-2) The Timing Diagram a.1 Input signal range tc Dcd R05-R00 G05-G00 B05-B00 Ddc DENB a.2 HSYNC timing Hp Hpw HSYNC Hdp Hbp Hfp R,G,B Vaild data a.3 CLK,HSYNC relationship CLK Hhc HSYNC a.4 HSYNC, VSYNC relationship The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:14 PD050VL1 a.5 VSYNC timing DENB a.6 DENB timing Line 1 Line 480 Line 1 Line 2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:15 PD050VL1 12. Power On Sequence VCC 3.0V 3.0V Logic Signal 0.3V t1 t2 t3 OFF Backlight OFF ON 10ms 10ms 1. 0Іt1Љ20ms 2. 0Іt2Љ50ms 3. 0Іt3Љ1s 13. Optical Characteristics 13-1) Specification: Viewing Angle Parameter Horizontal Vertical Contrast Ratio Response time CR Rise Fall Brightness Uniformity Cross Talk White Chromaticity LED Life Time Symbol Ӱ21, Ӱ22 Ӱ12 Ӱ11 Tr Tf L U x y Condition CRЇ10 At optimized Viewing angle Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ +25к MIN. 55 35 50 TYP. 60 40 55 MAX. - Unit deg deg deg 200 400 - - 15 30 25 50 400 450 70 80 3.5 0.28 0.31 0.34 0.31 0.34 0.37 20,000 30,000 - ms ms cd/ф % % hrs Ta=25к Remarks Note 13-1 Note 13-2 Note 13-4 Note 13-3 Note 13-6 Note 13-7 Note 13-3 Note 13-5 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:16 PD050VL1 Note 13-1 : The definitions of viewing angle diagrams : Note 13-2: CR = Luminance when LCD is White Luminance when LCD is Black Contrast Ratio is measured in optimum common electrode voltage. Note 13-3 : Topcon BM-7 (fast) luminance meter 1̓field of view is used in the testing (after 20~30 minutes operation). Note 13-4 : The definitions of response time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 13-5: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED =160mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:17 PD050VL1 Note 13-6 : The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1 /6 2 /6 2 /6 1 /6 1 /6 2 /6 2 /6 1 /6 Note 13-7: Cross Talk (CTK) = ~YA-YB~ ͪ100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:18 PD050VL1 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. e) Please following the tear off direction as figure14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass, which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:19 PD050VL1 Figure 14-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:20 PD050VL1 15. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Ta = +90к, 240 hrs Ta = -40к, 240 hrs Ta = +80к, 240 hrs Ta = -30к, 240 hrs Ta = +60к, 90%RH, 240 hrs -30к Ш +80к, 200 Cycles 30 min 30 min FrequencyΚ10 ~ 55 HZ AmplitudeΚ1 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: ̈́X, ̈́Y, ̈́Z Cycle: 3 times 150pF, 330Ө Air : ̈́15KV ; Contact : ̈́8KV 10 times/point , 9 points/panel face Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including: line defect ,no image).All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:21 PD050VL1 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:22