SMD A 91-21UYC/S530-XX/XXX Features ․Package in 12mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․EIA Std. package. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. ․ Compliance with EU REACH. ․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm) Description ․The 95-21 SMD LED is much smaller than leaded components . Thus enable smaller board size. Higher packing density. Reduced storage space 1 Copyright Revision :2 © Release Date:2014-12-05 2010, Everlight All Rights Reserved. Release Date : 4-Dec -2014. Issue No: DSE-0012475 Rev.2 LifecyclePhase: Expired Period: Forever 15:23:39.0 www.everlight.com DATASHEET SMD A 91-21UYC/S530-XX/XXX and finally smaller equipment to be obtained. ․Besides, light weight makes them ideal for miniature applications. ․Furthermore by automation assembly machines the accuracy is anticipated. Applications ․Small indicator for indoor applications. ․Flat backlight for LCD, switches and symbols. ․Indicator and backlight in office equipment. ․Indicator and backlight for battery driven equipment. ․Indicator and backlight for audio and video equipment. ․Backlighting in dashboards and switches. ․Telecommunication：indicator and backlighting in telephone and fax. Device Selection Guide Chip Emitted Color Resin Color Super Yellow Water Clear Materials AlGaInP Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 20 mA IFP 60 mA Power Dissipation Pd 160 mW Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge ESD 2000 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) 2 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX Parameter Symbol Min. Typ. Max. Unit Condition A2 198 529 ----- A3 463 714 A4 661 892 A5 793 1156 mcd IF=20mA A6 991 1454 A7 1150 1600 2θ1/2 ----- 25 ----- deg IF=20mA Peak Wavelength λp ----- 591 ----- nm IF=20mA Dominant Wavelength λd ----- 589 ----- nm IF=20mA Spectrum Radiation Bandwidth ----- 15 ----- nm IF=20mA Forward Voltage △λ VF ----- 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Iv Luminous Intensity Viewing Angle Rank Note: 1.T0olerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage: ±0.1V Typical Electro-Optical Characteristics Curves 3 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX Package Outline Dimensions 4 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX 91-21 F2 5 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX TR7 TR9 6 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX TR10 Note: The tolerances unless mentioned are ±0.1, unit=mm. 7 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX Package Outline Dimensions Label Explanation ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank Reel & Carrier Tape Dimensions 8 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX Note: The tolerances unless mentioned are ±0.1, unit=mm. Loaded quantity is 1000 PCS/bag bulk 91-21/TR7 1 91-21/TR9 9 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX 91-21/TR10 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 72 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 10 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 11 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever DATASHEET SMD A 91-21UYC/S530-XX/XXX 12 Revision : 2 © 2010, Everlight All Rights Reserved. Release Date :4-Dec -2014. Copyright LifecyclePhase: Release Date:2014-12-05 15:23:39.0 Issue No: DSE-0012475 Rev.2 www.everlight.com Expired Period: Forever