SMD B 23-22C/S2BHC-B30/2A Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Description ․The 23-22C SMD LED is much smaller than lead frame type components, thus enable smaller board ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Device Selection Guide Chip Chip Type Materials Emitted Color Resin Color S2 AlGaInP Brilliant Orange Water Clear BH InGaN Blue Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Reverse Voltage VR Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP Power Dissipation Pd Operating Temperature Storage Temperature Topr Tstg Electrostatic Discharge ESDHBM Soldering Temperature Tsol Rating Unit 5 V S2：25 mA BH：25 S2：60 mA BH：100 S2：60 mW BH：95 -40 ~ +85 ℃ -40 ~ +90 ℃ S2：2000 V BH：150 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Iv Viewing Angle 2θ1/2 Peak Wavelength λ p Dominant Wavelength λ d Spectrum Radiation Bandwidth △λ Forward Voltage VF Reverse Current IR Min. S2：22.5 BH：22.5 ----S2：----BH：----S2：----BH：----S2：----BH：----S2：1.7 BH：2.7 S2：----BH：----- Typ. Max. Unit Condition mcd IF=10mA deg IF=10mA nm IF=10mA --------130 611 468 57.0 57.0 ------------- 605 470 --------- nm IF=10mA 17 25 --------- nm IF=10mA 2.0 3.3 2.4 3.7 V IF=10mA --------- 10 50 μA VR=5V Note: Tolerance of Luminous Intensity: ±11% 2 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Bin Range of Luminous Intensity S2 Bin Code Min. Max. Unit Condition 1 2 22.5 36.0 36.0 57.0 mcd IF =10mA Bin Code Min. Max. Unit Condition 1 2 22.5 36.0 36.0 57.0 mcd IF =10mA BH Note: Tolerance of Luminous Intensity: ±11% 3 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Typical Electro-Optical Characteristics Curves S2 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Typical Electro-Optical Characteristics Curves BH 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Package Outline Dimensions Note: Tolerances unless mentioned ±0.1mm. Unit = mm Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 8 Aluminum moisture-proof bag Desiccant Label Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com DATASHEET SMD REFLECTOR 23-22C/S2BHC-B30/2A Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 10 Copyright © 2010, Everlight All Rights Reserved. Release Date : Mar.21.2013. Issue No: DSE-0008846 Rev.4 www.everlight.com