ACS Axial Coated Silicon Resistors The design of the ACS resistor provides a good balance of power density, stability and resistance to environment for a broad range of industrial power applications, such as drives and controls. • Good ratio between power capability and physical size • Wound to maximise high pulse capability • Low inductive versions available • Available on tape and reel 1W to 5W or bulk • RoHS Compliant Characteristics Tolerance (Code): Standard F (±1%), J (±5%) and K (±10%); other tolerances available on request Temperature coefficient: <1R ± 90ppm/°C, 1R-10R ±50ppm/°C, >10R ± 20ppm/°C Insulation resistance: 1, 000M ohms minimum dry, 100M ohms minimum after moisture test Dielectric withstand voltage: 500V AC MIL types: Available upon request. Electrical Specifications Derating Curve 100 Resistance range Type Wattage Max working voltage (V) ACS 1 1 50 ACS 2 2 100 R01 - 10K R1 - 4K ACS 3 3 200 R01 - 18K R01 - 9K ACS 5S 5 157 R01 - 22K R01 - 10K ACS 5L 5 400 R01 - 35K R1 - 17K ACS 7 7 450 R01 - 50K R1 - 25K ACS 10S 10 700 R01 - 70K R01 - 35K ACS 10L 10 800 R01 - 100K R01 - 50K Non Inductive (N) 80 R01 - 8K R01 - 3K 60 Rated load % Inductive ACS 1 ACS 10L 40 ACS 5S 20 0 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 Temperature ˚C Ordering Procedure Typical Inductance Standard Resistor To specify standard: Series, Wattage Rating, Type <50 ohms >50 ohms ACS 1 - ACS2 0.2µH 0.37µH ACS 3 - ACS5L 0.3µH 0.6µH ACS 7 - ACS 10L 0.65µH 1.2µH Winding Type, Resistance and Tolerance Code, e.g.: ACS3 18K F ACS3N 18K F (non-inductive) Tolerance (Code) ±0.05% (A), ±0.1% (B), ±1% (F), ±2% (G), ±5% (J), ±10% (K) As specified by MIL-R-39007. Max series inductance at 0.5MHz. ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 E [email protected] www.arcolresistors.com It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. Page 1 of 2 5/11.24 ACS Axial Coated Silicon Resistors Dimensions (mm) C B C D E Type B ± 1.5 C ± 1.0 D ± 0.02 E ± 0.8 ACS 1 12 37.0 0.8 4 ACS 2 13.8 35.0 0.8 4.7 ACS 3 15.7 35.0 0.8 5.9 ACS 5S 12.7 35.0 0.8 4.78 ACS 5L 22.5 44.0 1.0 8.52 ACS 7 24.5 44.0 1.0 8.52 ACS 10S 35 39.2 1.0 8.52 ACS 10L 46.2 33.0 1.0 10.5 ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 E [email protected] www.arcolresistors.com It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. Page 2 of 2 5/11.24