M81700FP Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 HVIC High Voltage Integrated Circuit 600 Volts/±2 Amperes 16 9 RECOMMENDED MOUNT PAD D T E R A C S 1 8 DETAIL "A" DETAIL "B" Q B PIN NUMBER DETAIL "A" H 1 2 3 4 5 6 J N DETAIL "B" E F K P L G LO LGND VCC NC NC VS 7 VB 8 HO M 9 10 11 12 13 14 NC NC VDD HIN SD LIN 15 GND 16 NC 7 VB HV LEVEL SHIFT VDD 11 HIN 12 VDD/VCC LEVEL SHIFT SD 13 VDD/VCC LEVEL SHIFT LIN 14 VDD/VCC LEVEL SHIFT R Q S PULSE GEN UV DETECT FILTER INTER LOCK RQ R S 8 HO 6 VS S R Q UV SIGNAL DELAY UV DETECT FILTER 3 VCC R Q S GND 15 1 LO 2 LGND Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J Inches 0.31±0.01 0.41±0.004 0.21±0.004 0.12 0.05 0.02±0.002 0.004 0.07 0.01±0.004 Millimeters 7.8±0.3 10.1±0.1 5.3±0.1 2.10 1.27 0.4±0.05 0.1 1.8 0.1±0.1 Dimensions K L M N P Q R S T Inches 0.05 0.024±0.008 0.1±0.002 4°±4° 0.03 Max. 0.006 0.05 Min. 0.30 0.029 Millimeters 1.25 0.6±0.2 0.2±0.05 4°±4° 0.755 Max. 0.15 Min. 1.27 7.62 0.76 Description: M81700FP is a high voltage Power MOSFET and IGBT module driver for half-bridge applications. Features: £ Floating Supply Voltage £ Output Current £ Half-Bridge Driver £ SOP-16 Applications: £ HID £ PDP £ MOSFET Driver £ IGBT Driver £ Inverter Module Control Ordering Information: M81700FP is a ±2 Ampere, 600 Volt HVIC, High Voltage Integrated Circuit 1 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 M81700FP HVIC, High Voltage Integrated Circuit 600 Volts/±2 Amperes Absolute Maximum Ratings, Ta = 25°C unless otherwise specified Characteristics Symbol M81701FP Units VB -0.5 ~ 624 Volts VS -0.5 ~ 600 Volts VBS -0.5 ~ 24 Volts High Side Floating Supply Absolute Voltage High Side Floating Supply Offset Voltage High Side Floating Supply Voltage (VBS = VB – VS) Allowable Offset Supply Voltage Minus Serge (PW < 1µs) -VS -5 Volts High Side Output Voltage VHO VS – 0.5 ~ VB + 0.5 Volts Low Side Fixed Supply Voltage VCC -0.5 ~ 24 Volts Low Side Output Voltage VLO -0.5 ~ VCC + 0.5 Volts Logic Supply Voltage VDD -0.5 ~ 24 Volts Logic Input Voltage (HIN, LIN) VIN -0.5 ~ VDD + 0.5 Volts Shutdown Input Voltage SD -0.5 ~ VDD + 0.5 Volts Low Side Return Offset Voltage (VCC – LGND < 24V) LGND -5 ~ VCC + 0.5 Volts Allowable Offset Supply Voltage Transient dVS/dt ±50 V/ns Pd 0.88 Watts Package Power Dissipation (Ta = 25°C, On Board) Linear Derating Factor (Ta > 25°C, On Board) Junction to Case Thermal Resistance Kθ -8.8 mW/°C Rth(j-c) 50 °C/W Junction Temperature Tj -20 ~ 125 °C Operation Temperature Topr -20 ~ 75 °C Storage Temperature Tstg -40 ~ 125 °C Recommended Operating Conditions Characteristics High Side Floating Supply Absolute Voltage Symbol Test Conditions VB Typ. Max. Units — VS + 20 Volts High Side Floating Supply Offset Voltage VS High Side Floating Supply Voltage VBS Low Side Fixed Supply Voltage Logic Supply Voltage Logic Input Voltage VIN 0 Shutdown Input Voltage SD 0 LGND -5 — Low Side Return Offset Voltage 0 — 500 Volts 10 — 20 Volts VCC 10 — 20 Volts VDD 5 — 20 Volts — VDD Volts — VDD Volts 5 Volts VBS = VB – VS HIN, LIN THERMAL DERATING FACTOR CHARACTERISTICS PACKAGE POWER DISSIPATION, Pd, (WATTS) 2.0 1.5 1.0 0.5 0 0 25 50 75 TEMPERATURE, (°C) 2 Min. VS + 10 100 125 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 M81700FP HVIC, High Voltage Integrated Circuit 600 Volts/±2 Amperes Electrical Characteristics Ta = 25°C, VCC = VBS (= VB – VS) = VDD = 15V, LGND = 0V unless otherwise specified Characteristics Symbol Min. Typ. Max. — — 1 µA IBS — 0.4 0.7 mA ICC — 0.75 1.5 mA — — 10 µA 13.8 14.4 — Volts Floating Supply Leakage Current IFS VBS Standby Current VCC Standby Current Test Conditions VB = VS = 600V VDD Standby Current IDD High Level Output Voltage VOH IO = 0A, LO, HO Low Level Output Voltage Units VOL IO = 0A, LO, HO — — 0.1 Volts High Level Input Threshold Voltage VIH15 HIN, LIN — 8.4 9.5 Volts Low Level Input Threshold Voltage VIL15 HIN, LIN 6.0 6.8 — Volts High Level Input Threshold Voltage VIH5 HIN, LIN (VDD = 5V) — 3.1 4.1 volts Low Level Input Threshold Voltage VIL5 HIN, LIN (VDD = 5V) 1.4 2.4 — Volts Shutdown High Level Input Threshold Voltage VISDH15 SD — 8.4 9.5 Volts Shutdown Low Level Input Threshold Voltage VISDL15 SD 6.0 6.8 — Volts Shutdown High Level Input Threshold Voltage VISDH5 SD (VDD = 5V) — 3.1 4.1 Volts Shutdown Low Level Input Threshold Voltage VISDL5 SD (VDD = 5V) 1.4 2.4 — Volts IIH VIN = 15V — 75 150 µA Low Level Input Bias Current IIL VIN = 0V — — 1.0 µA VBS Supply UV Reset Voltage VBSuvr 7.5 8.6 9.7 Volts VBS Supply UV Hysteresis Voltage VBSuvh 0.1 0.4 0.7 Volts VBS Supply UV Filter Time tVBSuv — 10 — µs VCC Supply UV Reset Voltage VCCuvr 7.5 8.6 9.7 Volts VCC Supply UV Hysteresis Voltage VCCuvh 0.1 0.4 0.7 Volts VCC Supply UV Filter Time tVCCuv — 10 — µs High Level Input Bias Current Output High Level Short Circuit Pulsed Current IOH VO = 0V, VIN = 15V, PW < 10µs — -2.5 — Amperes Output Low Level Short Circuit Pulsed Current IOL VO = 15V, VIN = 0V, PW < 10µs — 2.5 — Amperes Output High Level ON Resistance ROH IO = -200mA, ROH = (VOH – VO)/IO — 10 13 Ω Output Low Level ON Resistance ROL IO = 200mA, ROL = VO /IO — 2.5 3 Ω High Side Turn-On Propagation Delay tdLH(HO) CL = 1000pF between HO – VS — — 350 ns High Side Turn-Off Propagation Delay ns tdHL(HO) CL = 1000pF between HO – VS — — 330 High Side Turn-On Rise Time trH CL = 1000pF between HO – VS — — 60 ns High Side Turn-Off Fall Time tfH CL = 1000pF between HO – VS — — 30 ns Low Side Turn-On Propagation Delay tdLH(LO) CL = 1000pf between LO – GND — — 350 ns Low Side Turn-Off Propagation Delay tdHL(LO) CL = 1000pf between LO – GND — — 330 ns Low Side Turn-On Rise Time trL CL = 1000pf between LO – GND — — 60 ns Low Side Turn-Off Rise Time tfL CL = 1000pf between LO – GND — — 30 ns Delay Matching, High Side and Low Side Turn-On ΔtdLH |tdLH(HO) – tdLH(LO)| — — 30 ns Delay Matching, High Side and Low Side Turn-Off ΔtdHL |tdHL(HO) – tdHL(LO)| — — 30 ns tSD CL = 1000pF between HO-VS, CL = 1000pF between LO-GND — — 350 ns Shutdown Propagation Delay 3 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 M81700FP HVIC, High Voltage Integrated Circuit 600 Volts/±2 Amperes FUNCTION TABLE (X: H or L) VBS UV VCC UV HO LO SD L L H H L L L LO = OFF, HO = OFF HIN LIN Behavioral State L H H H L H L LO = ON, HO = OFF H L H H H L L LO = OFF, HO = ON H H H H * * L X L L H L L L LO = OFF, HO = OFF, VBS UV tripped X H L H L H L LO = ON, HO = OFF, VBS UV tripped L X H L L L L LO = OFF, HO = OFF, VCC UV tripped H X H L L L L LO = OFF, HO = OFF, VCC UV tripped X X H H L L H LO = OFF, HO = OFF, SD = ON Note : “L” state of VBS UV and VCC UV means that UV trip voltage. * If both input signals are “H”, refer to TIMING DIAGRAM. TIMING DIAGRAM 1. Input/Output Timing Diagram When input signal (HIN or LIN) is “H”, then output signal (HO or LO) is “H”. In the case of both input signals (HIN and LIN) are “H”, first coming input signal (HIN or LIN) “H” is only accepted. Corresponding this signal, output signal (HO or LO) becomes “H”. Corresponding the other signal (LIN or HIN), output signal (LO or HO) keeps “L”. HIN LIN HO LO 2. Shutdown Input Timing Diagram When shutdown input signal (SD) is “H”, then output signals (HO and LO) are “L”. Output signals (HO and LO) keep “L” by shutdown input signal (SD) is “L” until next input signal (HIN or LIN) is “H”. HIN or LIN SD HO or LO 3. VCC (VBS) Supply Under Voltage Lockout Timing Diagram VCCuvh (VBSuvh) VCC (VBS) VCCuvt (VBSuvt) tVCCuv (tVBSuv) VCCuvr (VBSuvr) LO (HO) LIN (HIN) 4 4. Allowable Supply Voltage Transient Allowable high side floating supply voltage (VBS) transient or low side fixed supply voltage (VCC) transient are below 50V/µs. In case VBS or VCC are started more than 50V/µs, output signal (HO or LO) may be “H”.