CD63__15B POW-R-BLOKTM Dual SCR Isolated Module 150 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. OUTLINE DRAWING A D F E B F 6 7 4 5 G S 1 2 3 M Ε "K" (2) "J" (3) R Features: Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Glass Passivated Chips Metal Baseplate Low Thermal Impedance for Improved Current Capability Quick Connect Gate Terminal with Provision for Keyed Mating Plug UL Recognized (E78240) N C P Q H 7 CD63__15B Dual SCR Isolated POW-R-BLOKTM Module 150 Amperes / Up to 1800 Volts 6 1 ~ + 2 - 3 5 4 CONNECTION DIAGRAM Benefits: Ordering Information: CD63_15B Outline Dimensions Dimension Inches Millimeters A 3.70 94 B 1.34 34 C 1.18 30 D 3.15 80 E 0.67 17 F 0.91 23 G 0.51 13 H 0.35 8.3 J M6 M6 6.4 K 0.26 M .020 5 N 0.28 6 P 1.06 27 Q 1.14 29 R 0.03 0.8 S 0.11 2.8 Select the complete nine digit module part number from the table below. Example: CD631615B is a 1600Volt, 150 Ampere Dual SCR Isolated POW-R-BLOKTM Module No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Type CD63 Voltage Current Volts Amperes (x 10) (x100) 08 12 14 16 18 15 Version B Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. Revision Date: 04/28/2009 CD63__15B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com POW-R-BLOKTM Dual SCR Isolated Module 150 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V RMS Forward Current 180° Conduction, TC=85°C IT(RMS) 235 A Average Forward Current 180° Conduction, TC=82°C IT(AV) 160 A 180° Conduction, TC=85°C IT(AV) 150 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 3700 A 60 Hz, No VRRM reapplied, Tj=125°C ITSM 5250 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 3520 50 Hz, No VRRM reapplied, Tj=125°C ITSM 5000 A A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 2970 A ITSM 2830 A ITSM 2335 A ITSM 2220 Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive 50 Hz, 100% VRRM reapplied, Tj=125°C Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C A 2 It 2 It 57,040 114,840 A sec 2 A sec It 2 61,950 A sec 2 It 125,000 A sec Tj=125°C, VD= VDRM (Rated), ITM=400A , IG=0.5 A, Tr < 0.25µs, tp > 6µs di/dt 200 A/µs Peak Gate Power Dissipation Tp < 5 ms, Tj = 125°C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125°C PG(AV) 3 W Peak Forward Gate Current Tp < 5 ms, Tj = 125°C IGFM 3 A Peak Reverse Gate Voltage Tp < 5 ms, Tj = 125°C 8.3 ms, 100% VRRM reapplied, Tj=125°C 8.3 ms, No VRRM reapplied, Tj=125°C 10 ms, 100% VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=125°C Maximum Rate-of-Rise of On-State Current, Non Repetitive 2 2 2 VGRM 10 V Operating Temperature TJ -40 to +125 °C Storage Temperature Tstg -40 to +125 °C 35 - 50 4-6 35 - 50 4-6 165 in.-Lb. Nm in.-Lb. Nm g 0.36 oz. Max. Mounting Torque, M6 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation Tj= 25°C, 1 second Vrms 3600 V Tj= 25°C, 1 minute Vrms 3000 V Revision Date: 04/28/2009 CD63__15B POW-R-BLOKTM Dual SCR Isolated Module 150 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1800V, TJ=125°C 50 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1800V, TJ=125°C 50 mA Peak On-State Voltage VTM ITM=500A 1.6 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) 0.85 1.5 V mΩ Minimum dV/dt dV/dt Exponential to 2/3 VDRM Tj=125°C, Gate Open Turn-Off Time (Typical) t off Gate Trigger Current IGT Gate Trigger Voltage VGT Non-Triggering Gate Voltage VGDM Non-Triggering Gate Current Min. Max. 1000 50 - 200 TJ = 125°C, IT= 300A, Rgk = 100Ω Vr = 50V, -dI/dt=15 A/µs Re-Applied dV/dt = 20V/µs, Linear to 2/3 VDRM Tj= 25°C, VD=6V, Ra=1Ω, Resistive Load Units V/µs (Typical) µs 150 mA Tj= 25°C, VD=6V, Ra=1Ω, Resistive Load Tj=125°C, VD=VDRM 2.0 Volts 0.25 Volts IGDM Tj=125°C, VD=VDRM 10 mA Holding Current IH TJ=25°C 150 (Typical) mA Latching Current IL TJ=25°C 300 (Typical) mA Thermal Characteristics Characteristics Thermal Resistance, Junction to Case DC Operation Thermal Resistance, Case to Sink Lubricated Symbol Max. Units RΘJ-C Per Module, both conducting Per Junction, both conducting 0.085 0.17 °C/W °C/W RΘC-S Per Module 0.05 °C/W Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 CD63__15B POW-R-BLOKTM Dual SCR Isolated Module 150 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 °C ) (Junction to Case) 0.18 5 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts 0.16 4 3 2 1 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0 10 100 1000 0 0.01 10000 0.1 1 Instantaneous On-State Current - Itm - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Sinusoidal Waveform) (Sinusoidal Waveform) 125 120 180° 120° 200 Max. Case Temperature - Tcase - °C Maximum Power Dissipation Per SCR - Watts 250 90° 60° 150 15° 30° 100 50 0 180 360 CONDUCTION ANGLE 0 115 180 0 110 360 CONDUCTION ANGLE 105 15° 100 30° 95 60° 90 180° 90° 85 120° 80 0 20 40 60 80 100 120 140 160 0 20 40 Average On-State Current - It(av) - Amperes 60 80 100 120 140 160 Average On-State Current - It(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 125 300 270° 250 200 90° 120° 60° 150 15° 30° 100 50 0 180 120 360° 180° 360 CONDUCTION ANGLE Max. Case Temperature - Tcase - °C Maximum Power Dissipation Per SCR - Watts 10 Time - t - Seconds 115 110 180 0 360 CONDUCTION ANGLE 105 100 95 90 30° 85 15° 80 75 60° 90° 120° 180° 270° 360° 70 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Average On-State Current - It(av) - Amperes 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Average On-State Current - It(av) - Amperes Revision Date: 04/28/2009