CM35MXA-24S Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts A AG D AJ AK AH E F K G J K H L K L K K L K M K AA AB C K DETAIL "A" Z AN 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 DETAIL "B" X 54 55 56 K 57 P 60 K 29 K28 K 61 W 2 3 K T 4 5 6 7 8 K L K K K K L K AF DETAIL "B" Y N (4 PLACES) L DETAIL "A" P(54-56) AL 24 9 10 11 12 13 14 15 16 17 18 19 20 21 22 L AD B 25 K23 W 1 AC Tolerance Otherwise Specified (mm) Division of Dimension Tolerance 0.5 to 3 ±0.2 over 3 to 6 ±0.3 over 6 to 30 ±0.5 over 30 to 120 ±0.8 over 120 to 400 ±1.2 The tolerance of size between terminals is assumed to ±0.4 AE P1(48-49) GUP(13) GVP(18) GWP(23) TH1 (28) B(52-53) R S T (1-2) (5-6) (9-10) N(59-61) U V AM S R 26 K K Q 27 L L 58 59 30 U(14-15) V(19-20) W(24-25) GUN(40) GVN(33) GWN(31) TH2 (29) NTC GB(41) N1(44-45) Es(32) Es1(39) Caution: Each (two or three) pin terminal of P/N/P1/N1/U/V/W/B/R/S/T is connected in the module, however, all three pins should be used for external wiring. Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R S T U 03/14 Rev. 4 Inches 4.79 2.44 0.51 4.49 4.33±0.02 3.89 3.72 0.16 0.51 0.15 0.45 0.9 0.22 Dia. 2.13 1.53 1.97±0.02 2.26 0.30 0.102 Dia. Millimeters 121.7 62.0 13.0 114.05 110.0±0.5 99.0 94.5 4.06 13.09 3.81 11.43 22.86 5.5 Dia. 54.2 39.0 50.0±0.5 57.5 7.75 2.6 Dia. Dimensions V W X Y Z AA AB AC AD AE AF AG AH AJ AK AL AM AN Inches 0.088 Dia. 0.46 0.16 0.59 0.27 0.81 0.67 0.12 0.14 0.03 0.15 0.05 0.025 0.29 0.05 0.49 0.12 0.17 Dia. Millimeters 2.25 Dia. 11.66 4.2 15.0 7.0 20.5 17.0 3.0 3.5 0.8 3.75 1.15 0.65 7.4 1.2 12.5 3.0 4.3 Dia. Description: CIBs are low profile and thermally efficient. Each module consists of a three-phase diode converter section, a three-phase inverter section and a brake circuit. A thermistor is included in the package for sensing the baseplate temperature. 6th Generation CSTBT chips yield low loss. Features: £ Low Drive Power £ Low VCE(sat) £ Discrete Super-Fast Recovery Free-Wheel Diode £ Isolated Baseplate for Easy Heat Sinking Applications: £ AC Motor Control £ Motion/Servo Control £ Photovoltaic/Fuel Cell Ordering Information: Example: Select the complete module number you desire from the table below -i.e. CM35MXA-24S is a 1200V (VCES), 35 Ampere CIB Power Module. Type Current Rating Amperes VCES Volts (x 50) CM35 24 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Inverter Part IGBT/Diode Characteristics SymbolRating Units Collector-Emitter Voltage (VGE = 0V) VCES1200 Volts Gate-Emitter Voltage (VCE = 0V) VGES±20 Volts Collector Current (DC, TC = 125°C)*2,*4IC Collector Current (Pulse, 35Amperes Repetitive)*3I CRM 70Amperes Total Power Dissipation (TC = 25°C)*2,*4Ptot 355Watts Emitter Current*2 IE*1 35Amperes Emitter Current (Pulse, Repetitive)*3 IERM*1 70Amperes Maximum Junction Temperature, Instantaneous Event (Overload) Tj(max)175 °C Brake Part IGBT/Diode Characteristics SymbolRating Units Collector-Emitter Voltage (VGE = 0V) VCES1200 Volts Gate-Emitter Voltage (VCE = 0V) VGES±20 Volts Collector Current (DC, TC = 125°C)*2,*4IC 35Amperes Collector Current (Pulse, Repetitive)*3ICRM 70Amperes Total Power Dissipation (TC = 25°C)*2,*4Ptot 355Watts Repetitive Peak Reverse Voltage (VGE = 0V) Forward Current*2 VRRM1200 Volts IF*1 35Amperes 107.2 99.2 21.1 0 91.8 Tj(max)175 °C 0 0 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 18.4 CR CR CR RN SN TN 61 60 CR CR CR RP SP TP 0 1 2 3 4 5 6 7 8 30 29 28 27 26 25 24 23 19.6 22.0 24.9 25.8 26.2 34.2 40.8 43.8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 99.6 106.2 44.9 90.9 43.9 74.2 58 59 Di Di UN VN Di Tr Tr Tr WN WN Th UN VN Di WP Tr Tr Di Tr Di WP UP UP VP VP Di Br 83.0 Tr Br 57 66.3 56 46.3 55 37.2 54 20.4 30.3 31.3 28.1 *1 Represent ratings and characteristics of the anti-parallel, emitter-to-collector free wheeling diode (FWDi). *2 Junction temperature (Tj) should not increase beyond maximum junction temperature (Tj(max)) rating. *3 Pulse width and repetition rate should be such that device junction temperature (Tj) does not exceed Tj(max) rating. *4 Case temperature (TC) and heatsink temperature (Ts) is measured on the surface (mounting side) of the baseplate and the heatsink side just under the chips. Refer to the figure to the right for chip location. The heatsink thermal resistance should be measured just under the chips. 81.8 Maximum Junction Temperature, Instantaneous Event (Overload) 72.3 IFRM*1 70Amperes 33.7 Forward Current (Pulse, Repetitive)*3 LABEL SIDE Each mark points to the center position of each chip. Tr*P / Tr*N / TrBr (* = U/V/W): IGBT DiBr: Clamp Di Th: NTC Thermistor 2 Di*P / Di*N (* = U/V/W): FWDi CR*P / CR*N (* = R/S/T): Conv Di 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Converter Part Diode Characteristics SymbolRating Units Repetitive Peak Reverse Voltage (VGE = 0V) VRRM1600 Volts Recommended AC Input Voltage (RMS) Ea 440Volts DC Output Current (3-Phase Full Wave Rectifying, TC = 125°C)*4IO Surge Forward Current (Sine Half Wave 1 Cycle Peak Value, f = 60Hz, Non-repetative) 35Amperes IFSM 350Amperes I2t 510A2s Current Square Time (Value for One Cycle of Surge Current) Maximum Junction Temperature, Instantaneous Event (Overload) Tj(max)150 °C Module Characteristics SymbolRating Units Isolation Voltage (Terminals to Baseplate, RMS, f = 60Hz, AC 1 minute) VISO2500Volts °C 21.1 0 *4 Case temperature (TC) and heatsink temperature (Ts) is measured on the surface (mounting side) of the baseplate and the heatsink side just under the chips. Refer to the figure to the right for chip location. The heatsink thermal resistance should be measured just under the chips. 107.2 °C -40 ~ +125 99.2 -40 ~ +150 Tstg 91.8 Tj(op) Storage Temperature 81.8 Operating Junction Temperature, Continuous Operation (Under Switching) 72.3 °C 33.7 Maximum Case Temperature*4TC(max)125 0 0 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 18.4 CR CR CR RP SP TP 2 3 4 5 6 7 8 30 29 28 27 26 25 24 23 19.6 22.0 24.9 25.8 26.2 34.2 40.8 43.8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 99.6 106.2 0 1 90.9 61 60 74.2 59 44.9 83.0 58 43.9 Di Di UN VN Di Tr Tr Tr WN WN Th UN VN Di WP Tr Tr Di Tr Di WP UP UP VP VP Di Br CR CR CR RN SN TN 66.3 Tr Br 57 46.3 56 37.2 55 28.1 54 20.4 30.3 31.3 LABEL SIDE Each mark points to the center position of each chip. Tr*P / Tr*N / TrBr (* = U/V/W): IGBT DiBr: Clamp Di Th: NTC Thermistor 03/14 Rev. 4 Di*P / Di*N (* = U/V/W): FWDi CR*P / CR*N (* = R/S/T): Conv Di 3 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts Electrical Characteristics, Tj = 25°C unless otherwise specified Inverter Part IGBT/Diode Characteristics Symbol Test Conditions Min. Typ. Max. Units Collector-Emitter Cutoff Current ICES VCE = VCES, VGE = 0V — — 1.0 mA Gate-Emitter Leakage Current IGES VGE = VGES, VCE = 0V — — 0.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 3.5mA, VCE = 10V 5.4 6.0 6.6 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 35A, VGE = 15V, Tj = 25°C*6 — 1.80 2.25 Volts (Terminal) IC = 35A, VGE = 15V, Tj = 125°C*6 — 2.00 — Volts IC = 35A, VGE = 15V, Tj = 150°C*6 —2.05 — Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 35A, VGE = 15V, Tj = 25°C*6 — 1.70 2.15 Volts (Chip) IC = 35A, VGE = 15V, Tj = 125°C*6 — 1.90 — Volts —1.95 — Volts — — 3.5 nF — — 0.7 nF — — 0.06 nF — 82 — nC — — 300 ns IC = 35A, VGE = 15V, Tj = Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Gate Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Emitter-Collector Voltage Emitter-Collector Voltage QG VCE = 10V, VGE = 0V VCC = 600V, IC = 35A, VGE = 15V td(on) tr VCC = 600V, IC = 35A, VGE = ±15V, — — 200 ns td(off) RG = 18Ω, Inductive Load — — 600 ns — — 300 ns VEC*1 tf IE = 35A, VGE = 0V, Tj = 25°C*6 — 1.80 2.25 Volts (Terminal) IE = 35A, VGE = 0V, Tj = 125°C*6 — 1.80 — Volts IE = 35A, VGE = 0V, Tj = 150°C*6 — 1.80 — Volts VEC IE = 35A, VGE = 0V, Tj = 25°C*6 — 1.70 2.15 Volts (Chip) IE = 35A, VGE = 0V, Tj = 125°C*6 — 1.70 — Volts *1 IE = 35A, VGE = 0V, Tj = Reverse Recovery Time 150°C*6 trr*1 150°C*6 — 1.70 — Volts VCC = 600V, IE = 35A, VGE = ±15V — — 300 ns *1 Reverse Recovery Charge Qrr RG = 18Ω, Inductive Load — 1.9 — µC Turn-on Switching Energy per Pulse Eon VCC = 600V, IC = IE = 35A, — 4.2 — mJ Turn-off Switching Energy per Pulse Eoff VGE = ±15V, RG = 18Ω, — 3.7 — mJ Reverse Recovery Energy per Pulse Err*1 Tj = 150°C, Inductive Load — 3.5 — mJ Main Terminals-Chip, — — 5.7 mΩ — 0 — Ω Internal Lead Resistance RCC' + EE' 107.2 99.2 91.8 72.3 21.1 33.7 Per Switch 0 0 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 18.4 CR CR CR RN SN TN 61 60 CR CR CR RP SP TP 0 1 2 3 4 5 6 7 8 30 29 28 27 26 25 24 23 19.6 22.0 24.9 25.8 26.2 34.2 40.8 43.8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 99.6 106.2 59 44.9 90.9 58 74.2 57 43.9 Di Di UN VN Di Tr Tr Tr WN WN Th UN VN Di WP Tr Tr Di Tr Di WP UP UP VP VP Di Br 83.0 Tr Br 66.3 56 46.3 55 37.2 54 20.4 30.3 31.3 28.1 rg *1 Represent ratings and characteristics of the anti-parallel, emitter-to-collector free wheeling diode (FWDi). *4 Case temperature (TC) and heatsink temperature (Ts) is measured on the surface (mounting side) of the baseplate and the heatsink side just under the chips. Refer to the figure to the right for chip location. The heatsink thermal resistance should be measured just under the chips. *6 Pulse width and repetition rate should be such as to cause negligible temperature rise. 0 Internal Gate Resistance 81.8 Per Switch,TC = 25°C*4 LABEL SIDE Each mark points to the center position of each chip. Tr*P / Tr*N / TrBr (* = U/V/W): IGBT DiBr: Clamp Di Th: NTC Thermistor 4 Di*P / Di*N (* = U/V/W): FWDi CR*P / CR*N (* = R/S/T): Conv Di 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts Electrical Characteristics, Tj = 25°C unless otherwise specified Brake Part IGBT/Diode Characteristics Symbol Test Conditions Min. Typ. Max. Units Collector-Emitter Cutoff Current ICES VCE = VCES, VGE = 0V — — 1.0 mA Gate-Emitter Leakage Current IGES VGE = VGES, VCE = 0V — — 0.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 3.5mA, VCE = 10V 5.4 6.0 6.6 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 35A, VGE = 15V, Tj = 25°C*6 — 1.80 2.25 Volts (Terminal) IC = 35A, VGE = 15V, Tj = 125°C*6 — 2.00 — Volts IC = 35A, VGE = 15V, Tj = 150°C*6 —2.05 — Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 35A, VGE = 15V, Tj = 25°C*6 — 1.70 2.15 Volts (Chip) IC = 35A, VGE = 15V, Tj = 125°C*6 — 1.90 — Volts —1.95 — Volts — — 3.5 nF — — 0.7 nF — — 0.06 nF — 82 — nC — — 300 ns IC = 35A, VGE = 15V, Tj = Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Gate Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time QG 150°C*6 VCE = 10V, VGE = 0V VCC = 600V, IC = 35A, VGE = 15V td(on) tr VCC = 600V, IC = 35A, VGE = ±15V, — — 200 ns td(off) RG = 18Ω, Inductive Load — — 600 ns — — 300 ns Reverse Current IRRM tf VR = VRRM, VGE = 0V — — 1.0 mA Forward Voltage VF IF = 35A, VGE = 0V, Tj = 25°C*6 — 1.80 2.25 Volts (Terminal) IF = 35A, VGE = 0V, Tj = 125°C*6 — 1.80 — Volts 150°C*6 — 1.80 — Volts VF IF = 35A, VGE = 0V, Tj = 25°C*6 — 1.70 2.15 Volts (Chip) IF = 35A, VGE = 0V, Tj = 125°C*6 — 1.70 — Volts IF = 35A, VGE = 0V, Tj = 150°C*6 — 1.70 — Volts IF = 35A, VGE = 0V, Tj = Forward Voltage Reverse Recovery Time trr VCC = 600V, IF = 35A, VGE = ±15V — — 300 ns Reverse Recovery Charge Qrr RG = 18Ω, Inductive Load — 1.9 — µC Turn-on Switching Energy per Pulse Eon VCC = 600V, IC = IF = 35A, — 4.2 — mJ Turn-off Switching Energy per Pulse Eoff VGE = ±15V, RG = 18Ω, — 3.7 — mJ Reverse Recovery Energy per Pulse Err Tj = 150°C, Inductive Load — 3.5 — mJ Internal Gate Resistance rg — 0 — Ω *6 Pulse width and repetition rate should be such as to cause negligible temperature rise. 03/14 Rev. 4 5 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts Electrical Characteristics, Tj = 25°C unless otherwise specified (continued) Converter Part Diode Characteristics Repetitive Peak Reverse Current Forward Voltage Symbol Test Conditions Min. Typ. Max. IRRM VR = VRRM, Tj = 150°C VF IF = 35A*6 Test Conditions Min. Units — — 4.0 mA — 1.2 1.6 Volts Typ. Max. Units 4.855.00 5.15 kΩ -7.3 +7.8 % (Terminal) NTC Thermistor Part Characteristics Symbol Zero Power Resistance R25 Deviation of Resistance ∆R/R B Constant B(25/50) TC = 25°C*4 TC = 100°C*4, R100 = 493Ω —3375 — K P25 TC = 25°C*4 — — 10 mW Thermal Resistance, Junction to Case*4 Rth(j-c)Q Per Inverter IGBT — — 0.42 K/W Thermal Resistance, Junction to Case*4 Rth(j-c)D Per Inverter Diode — — 0.69 K/W Thermal Resistance, Junction to Case*4 Rth(j-c)Q Per Brake IGBT — — 0.42 K/W Thermal Resistance, Junction to Case*4 Rth(j-c)D Per Brake Diode — — 0.69 K/W Case*4 Rth(j-c)D Per Converter Diode — — 0.45 K/W Rth(c-f) Thermal Grease Applied, — 15 — K/kW Power Dissipation Approximate by Equation*7 — Thermal Resistance Characteristics 107.2 99.2 91.8 81.8 72.3 33.7 0 0 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 18.4 CR CR CR RN SN TN 44.9 61 60 CR CR CR RP SP TP 0 1 2 3 4 5 6 7 8 30 29 28 27 26 25 24 23 19.6 22.0 24.9 25.8 26.2 34.2 40.8 43.8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 99.6 106.2 43.9 90.9 58 59 Di Di UN VN Di Tr Tr Tr WN WN Th UN VN Di WP Tr Tr Di Tr Di WP UP UP VP VP Di Br 74.2 Tr Br 57 83.0 56 66.3 55 37.2 54 20.4 30.3 31.3 46.3 *4 Case temperature (TC) and heatsink temperature (Ts) is measured on the surface (mounting side) of the baseplate and the heatsink side just under the chips. Refer to the figure to the right for chip location. The heatsink thermal resistance should be measured just under the chips. *6 Pulse width and repetition rate should be such as to cause negligible temperature rise. R25 1 1 *7 B(25/50) = In( )/( – ) R50 T25 T50 R25; Resistance at Absolute Temperature T25 [K]; T25 = 25 [°C] + 273.15 = 298.15 [K] R50; Resistance at Absolute Temperature T50 [K]; T50 = 50 [°C] + 273.15 = 323.15 [K] *8 Typical value is measured by using thermally conductive grease of λ = 0.9 [W/(m • K)]. Per 1 Module*8 21.1 Case to Heatsink*4 28.1 Contact Thermal Resistance, 0 Thermal Resistance, Junction to LABEL SIDE Each mark points to the center position of each chip. Tr*P / Tr*N / TrBr (* = U/V/W): IGBT DiBr: Clamp Di Th: NTC Thermistor 6 Di*P / Di*N (* = U/V/W): FWDi CR*P / CR*N (* = R/S/T): Conv Di 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts MechanicalCharacteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Mounting Torque Ms Mounting to Heatsink, M5 Screw 22 27 31 in-lb Creepage Distance ds Terminal to Terminal 6.47 — — mm Terminal to Baseplate 14.27 — — mm Clearance da Weight m Flatness of Baseplate ec Terminal to Terminal 6.47 — — mm Terminal to Baseplate 12.33 — — mm On Centerline X, Y*5 ±0 — ±100 µm Applied Across P-N/P1-N1 Terminals — 600 850 Volts 13.515.0 16.5 Volts 300 g Recommended Operating Conditions, Ta = 25°C DC Supply Voltage VCC Gate-Emitter Drive Voltage VGE(on) Applied Across GB-Es/ G*P-*P/G*N-Es (* = U, V, W) Terminals External Gate Resistance RG Per Switch Inverter IGBT 18 — 180 Ω Per Switch Brake IGBT 18 — 180 Ω – : CONCAVE + : CONVEX *5 Baseplate (mounting side) flatness measurement points (X, Y) are shown in the figure below. MOUNTING SIDE MOUNTING SIDE 03/14 Rev. 4 Y MOUNTING SIDE X – : CONCAVE + : CONVEX 7 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (INVERTER PART - TYPICAL) OUTPUT CHARACTERISTICS (INVERTER PART - TYPICAL) 60 15 Tj = 25°C 12 50 11 40 30 10 20 9 10 0 (Chip) 0 2 4 6 8 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 3.0 2.5 2.0 1.5 1.0 0.5 (Chip) 0 10 Tj = 25°C Tj = 125°C Tj = 150°C 0 10 20 30 40 50 60 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (INVERTER PART - TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (INVERTER PART - TYPICAL) Tj = 25°C 8 IC = 70A 6 IC = 35A 4 IC = 14A 2 0 70 102 10 (Chip) 6 8 10 12 14 16 18 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 8 3.5 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) VGE = 20V 13.5 EMITTER CURRENT, IE, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 70 20 Tj = 25°C Tj = 125°C Tj = 150°C 101 100 (Chip) 0 0.5 1.0 1.5 2.0 2.5 3.0 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts 101 103 tf Cies td(off) SWITCHING TIME, (ns) CAPACITANCE, Cies, Coes, Cres, (nF) HALF-BRIDGE SWITCHING CHARACTERISTICS (INVERTER PART - TYPICAL) CAPACITANCE VS. VCE (INVERTER PART - TYPICAL) 100 Coes 10-1 102 td(on) tr 101 VCC = 600V VGE = ±15V RG = 18Ω Tj = 125°C Inductive Load Cres VGE = 0V 10-2 10-1 100 101 100 100 102 101 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) HALF-BRIDGE SWITCHING CHARACTERISTICS (INVERTER PART - TYPICAL) SWITCHING TIME VS. GATE RESISTANCE (INVERTER PART - TYPICAL) 103 103 tf td(off) 102 td(on) tr 101 100 100 VCC = 600V VGE = ±15V RG = 18Ω Tj = 150°C Inductive Load 101 COLLECTOR CURRENT, IC, (AMPERES) 102 SWITCHING TIME, (ns) SWITCHING TIME, (ns) td(off) 03/14 Rev. 4 102 tf 102 101 101 td(on) tr VCC = 600V VGE = ±15V IC = 35A Tj = 125°C Inductive Load 102 103 EXTERNAL GATE RESISTANCE, RG, (Ω) 9 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts SWITCHING TIME VS. GATE RESISTANCE (INVERTER PART - TYPICAL) REVERSE RECOVERY CHARACTERISTICS (INVERTER PART - TYPICAL) 103 tf td(on) 102 VCC = 600V VGE = ±15V IC = 35A Tj = 150°C Inductive Load 101 101 103 REVERSE RECOVERY, Irr (A), trr (ns) tr 102 102 102 101 102 EXTERNAL GATE RESISTANCE, RG, (Ω) EMITTER CURRENT, IE, (AMPERES) REVERSE RECOVERY CHARACTERISTICS (INVERTER PART - TYPICAL) GATE CHARGE VS. VGE (INVERTER PART) 20 VCC = 600V VGE = ±15V RG = 18Ω Tj = 150°C Inductive Load Irr trr 101 100 101 EMITTER CURRENT, IE, (AMPERES) 10 VCC = 600V VGE = ±15V RG = 18Ω Tj = 125°C Inductive Load Irr trr 101 100 103 GATE-EMITTER VOLTAGE, VGE, (VOLTS) SWITCHING TIME, (ns) td(off) REVERSE RECOVERY, Irr (A), trr (ns) 103 102 IC = 35A VCC = 600V 16 12 8 4 0 0 50 100 150 GATE CHARGE, QG, (nC) 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts HALF-BRIDGE SWITCHING CHARACTERISTICS (INVERTER PART - TYPICAL) 100 100 10-1 Inductive Load, Per Pulse 100 Eon Eoff Err 101 SWITCHING ENERGY, Eon, Eoff, (mJ) 101 10-1 102 101 VCC = 600V VGE = ±15V RG = 18Ω Tj = 125°C REVERSE RECOVERY ENERGY, Err, (mJ) SWITCHING ENERGY, Eon, Eoff, (mJ) 102 101 100 100 10-1 Inductive Load, Per Pulse 10-1 10-2 102 100 SWITCHING ENERGY, Eon, Eoff, (mJ) REVERSE RECOVERY ENERGY, Err, (mJ) SWITCHING ENERGY, Eon, Eoff, (mJ) REVERSE RECOVERY ENERGY, Err, (mJ) 102 VCC = 600V VGE = ±15V IC = 35A Tj = 125°C Eon Eoff Err Inductive Load, Per Pulse 100 101 102 EXTERNAL GATE RESISTANCE, RG, (Ω) 03/14 Rev. 4 101 10-2 102 HALF-BRIDGE SWITCHING CHARACTERISTICS (INVERTER PART - TYPICAL) HALF-BRIDGE SWITCHING CHARACTERISTICS (INVERTER PART - TYPICAL) 101 Eon Eoff Err COLLECTOR CURRENT, IC, (AMPERES) EMITTER CURRENT, IE, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) EMITTER CURRENT, IE, (AMPERES) 102 101 VCC = 600V VGE = ±15V RG = 18Ω Tj = 150°C REVERSE RECOVERY ENERGY, Err, (mJ) HALF-BRIDGE SWITCHING CHARACTERISTICS (INVERTER PART - TYPICAL) 103 VCC = 600V VGE = ±15V IC = 35A Tj = 150°C Eon Eoff Err 101 Inductive Load, Per Pulse 100 101 102 103 EXTERNAL GATE RESISTANCE, RG, (Ω) 11 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (INVERTER PART - MAXIMUM) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (BRAKE PART - TYPICAL) 100 3.5 10-1 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.42 K/W (IGBT) Rth(j-c) = 0.69 K/W (FWDi) 10-2 10-3 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts 10-5 10-4 10-3 10-2 10-1 100 2.0 1.5 1.0 0.5 (Chip) 0 10 20 30 40 50 60 TIME, (s) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (BRAKE PART - TYPICAL) HALF-BRIDGE SWITCHING CHARACTERISTICS (BRAKE PART - TYPICAL) 70 103 (Chip) tf td(off) SWITCHING TIME, (ns) FORWARD VOLTAGE, VF, (VOLTS) 2.5 COLLECTOR CURRENT, IC, (AMPERES) 102 101 100 Tj = 25°C Tj = 125°C Tj = 150°C 0 0.5 1.0 1.5 2.0 2.5 FORWARD CURRENT IF, (AMPERES) 12 3.0 0 101 Tj = 25°C Tj = 125°C Tj = 150°C 3.0 102 td(on) tr 101 100 100 VCC = 600V VGE = ±15V RG = 18Ω Tj = 125°C Inductive Load 101 102 COLLECTOR CURRENT, IC, (AMPERES) 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts HALF-BRIDGE SWITCHING CHARACTERISTICS (BRAKE PART - TYPICAL) SWITCHING TIME VS. GATE RESISTANCE (BRAKE - TYPICAL) 103 103 tf td(off) td(on) tr 101 VCC = 600V VGE = ±15V RG = 18Ω Tj = 150°C Inductive Load 100 100 101 102 103 SWITCHING TIME VS. GATE RESISTANCE (BRAKE - TYPICAL) HALF-BRIDGE SWITCHING CHARACTERISTICS (BRAKE PART - TYPICAL) 102 td(on) tf tr 102 VCC = 600V VGE = ±15V IC = 50A Tj = 150°C Inductive Load 102 EXTERNAL GATE RESISTANCE, RG, (Ω) 103 SWITCHING ENERGY, Eon, Eoff, (mJ) SWITCHING TIME, (ns) VCC = 600V VGE = ±15V IC = 35A Tj = 125°C Inductive Load EXTERNAL GATE RESISTANCE, RG, (Ω) td(off) 03/14 Rev. 4 tr 102 COLLECTOR CURRENT, IC, (AMPERES) 103 101 101 tf 101 101 102 td(on) 101 VCC = 600V VGE = ±15V RG = 18Ω Tj = 125°C 101 100 100 10-1 Inductive Load, Per Pulse 10-1 100 Eon Eoff Err 101 REVERSE RECOVERY ENERGY, Err, (mJ) 102 SWITCHING TIME, (ns) SWITCHING TIME, (ns) td(off) 10-2 102 COLLECTOR CURRENT, IC, (AMPERES) FORWARD CURRENT, IF, (AMPERES) 13 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts HALF-BRIDGE SWITCHING CHARACTERISTICS (BRAKE PART - TYPICAL) HALF-BRIDGE SWITCHING CHARACTERISTICS (BRAKE PART - TYPICAL) 100 Eon Eoff Err 100 10-1 Inductive Load, Per Pulse 10-1 100 101 SWITCHING ENERGY, Eon, Eoff, (mJ) REVERSE RECOVERY ENERGY, Err, (mJ) 101 102 101 VCC = 600V VGE = ±15V RG = 18Ω Tj = 150°C REVERSE RECOVERY ENERGY, Err, (mJ) SWITCHING ENERGY, Eon, Eoff, (mJ) 102 VCC = 600V VGE = ±15V IC/IF = 35A Tj = 125°C Eon Eoff Err 101 Inductive Load, Per Pulse 100 10-2 102 101 HALF-BRIDGE SWITCHING CHARACTERISTICS (BRAKE PART - TYPICAL) 103 VCC = 600V VGE = ±15V IC/IF = 35A Tj = 150°C Eon Eoff Err Inductive Load, Per Pulse 100 101 102 EXTERNAL GATE RESISTANCE, RG, (Ω) 14 REVERSE RECOVERY CHARACTERISTICS (BRAKE PART - TYPICAL) REVERSE RECOVERY, Irr (A), trr (ns) SWITCHING ENERGY, Eon, Eoff, (mJ) REVERSE RECOVERY ENERGY, Err, (mJ) 101 103 EXTERNAL GATE RESISTANCE, RG, (Ω) COLLECTOR CURRENT, IC, (AMPERES) FORWARD CURRENT, IF, (AMPERES) 102 102 103 102 VCC = 600V VGE = ±15V RG = 18Ω Tj = 125°C Inductive Load Irr trr 101 100 101 102 FORWARD CURRENT, IF, (AMPERES) 03/14 Rev. 4 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com REVERSE RECOVERY CHARACTERISTICS (BRAKE PART - TYPICAL) REVERSE RECOVERY, Irr (A), trr (ns) 103 102 VCC = 600V VGE = ±15V RG = 18Ω Tj = 150°C Inductive Load Irr trr 101 100 101 102 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (BRAKE PART - MAXIMUM) 100 10-1 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.42 K/W (IGBT) Rth(j-c) = 0.69 K/W (FWDi) 10-2 10-3 10-5 10-4 10-3 FORWARD CURRENT, IF, (AMPERES) 101 Tj = 25°C Tj = 125°C 0.8 1.0 1.2 1.4 FORWARD VOLTAGE, VF, (VOLTS) 03/14 Rev. 4 1.6 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) FORWARD CURRENT IF, (AMPERES) 102 0.6 10-1 100 101 TIME, (s) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (CONVERTER PART - TYPICAL) 100 0.4 10-2 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (CONVERTER PART - MAXIMUM) 100 10-1 10-2 10-3 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.45 K/W 10-5 10-4 10-3 10-2 10-1 100 101 TIME, (s) 15 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM35MXA-24S NX-Series CIB Module (3Ø Converter + 3Ø Inverter + Brake) 35 Amperes/1200 Volts TEMPERATURE CHARACTERISTICS (NTC THERMISTOR PART - TYPICAL) RESISTANCE, R (kΩ) 102 101 100 10-1 -50 -25 0 25 50 75 100 125 TEMPERATURE, T (°C) 16 03/14 Rev. 4