FA10 Series

COMPONENTS PRODUCT INFORMATION
NEW
0.5mm Pitch, 0.9mm Overall Height FPC Connector
CONNECTOR
MB-0255-1
November 2012
FA10 Series
RoHS Compliant
The FA10 Series is a 0.5mm pitch, top and bottom-surface connection type, oneaction LIF* insertion FPC connector ideally suited for saving space in mobile devices.
Features
• Space saving FPC connector with 0.5mm pitch, 0.9 overall height, 3.2mm depth.
• Applicable FPC thickness 0.2  0.03mm, top and bottom-surface connection type, LIF
structure (non-sliding point of contact) .
• Guides for FPC sides for friction lock and prevention of misalignment.
• One-action mating, with no need for actuator or slider operation during insertion and
removal.
• Tapered guides in the insertion area for improved FPC insertion guidance.
• Board pattern traces are possible under the connector, excluding terminal areas.
Terminals at both front and back improve board retention strength.
• Pb-free, halogen-free compliant product.
• Ni barrier prevents solder wicking.
General Specifications
No. of Contacts: 4, 5, 6, 10 positions
Rated Current: DC 0.5 A per terminal
Contact Resistance: 70m max
Rated Voltage: AC, DC 50V per terminal
Dielectric Withstanding Voltage:
AC250 Vr.m.s per minute
Applicable FPC Thickness: 0.2  0.03mm
Pitch: 0.5mm one row alignment
Operating Temperature:
-40 Deg. C to +85 Deg. C
Durability: 20 mating cycles
*LIF: Low Insertion Force
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
1/6
MB-0255-1
Materials and Finishes
Component
Housing
Contact
Material / Finish
Heat-resistant resin (black, halogen-free)
Cu alloy, Au plating over Ni
Au 0.1m min.
Ordering Information
FA10 ** S A1 – R8000
Series
No. of Contacts
Reel Product: 8,000 pcs.
Modification Code
Number of Contacts
No. of Contacts
Development Status
4
Now in mass-production
5
Samples available
6
Now in mass-production
8
Development scheduled
10
Samples available
Development planned for additional pin count variations.
Maximum pin count will be 10 position.
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
2/6
MB-0255-1
Part Number
FA100*SA1
SJ Drawing
SJ111450
Unit: mm
Dimensions
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
3/6
MB-0255-1
・Applicable FPC Dimensions (for reference)
Unit: mm
Dimensions
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
4/6
MB-0255-1
Without Hole
Unit: mm
With Hole
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
5/6
MB-0255-1
・Applicable Board Dimensions (for reference)
Unit: mm
Related Documents
SJ Drawing
Packaging Drawing
Specifications
Handling Instructions
SJ111450
SJ111451
JACS-10931-0
JAHL-10931
Notice: Products shown in this brochure are made
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2882 FAX: +81-3-3780-2946
for the applications listed below. However, if the
above-mentioned products are to be used in aerospace
devices, marine cable-connection devices, atomic
power control systems, medical equipment for lifesupport systems, or any other specific application
requiring extremely high reliability, please contact
JAE for further information.
Recommended applications: Computers, Office
machines, Measuring devices, Telecommunication
devices (Terminals, Mobile devices), AV devices,
Household applications, FA devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
6/6