SF58 Series

COMPONENTS PRODUCT INFORMATION
NEW
CONNECTOR
microSIM Card Connector
MB-0271-1
April 2014
SF58 Series
RoHS Compliant
<Drawing when a tray is inserted>
Note: Tray is not included. Tray is to be prepared by customers.
<<Outline>>
Smartphones and tablet PC equipping microSIM (Mini UICC) Cards are increasing.
The SF58 Series is a push-eject type (ejected by pushing pin) connector compatible with
the micro SIM card.
(SIM: Subscriber Identity Module)
Features
1.3mm height, 15.5mm width, and 16.35mm depth, low-profile, space saving.
Card mis-insertion measures, with card detection switch (normal open).
Structure that enables visual check of terminal area after SMT Mounting.
Superior resistance against drop with original lock structure.
Pb-free, halogen-free compliant product.
Supports automated mounting with embossed tape.
General Specifications
 No. of Contacts: 6 pos. + 2 pos. (D-SW)
 Rated Current: 0.5A per pin
 Contact Resistance: 100mΩ max. (initial)
 Rated Voltage: 10V per pin
 Dielectric Withstanding Voltage:
AC500Vr.m.s for 1 minute
 Insulation Resistance:
1,000MΩ min. (initial)
Operating Temperature:
-40 Deg. C to +85 Deg. C
 Durability: 5,000 times
 Tray Insertion Force: 10N max.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
1/7
MB-0271-1
How to Eject Tray
1. Insert a pin into the hole
on the tray straightly.
HOLE
PIN
2. Push a pin in until a tray
ejects.
3. Pull the end with finger
tips and draw out a tray.
micro SIM Card
Tray
Note: Tray is not included.
Tray is to be prepared
by customers.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
2/7
MB-0271-1
Materials and Finishes
Component
Material and Finish
Signal Contact
D-SW Contact
Main Frame
Copper alloy / Contact area: Au plating over Ni
Terminal area: Au flash plating over Ni
Housing
Synthetic resin / None
Cover Frame
Stainless steel / Terminal area: Au flash plating
Eject Bar
Stainless steel / None
Eject Lever
Stainless steel / None
Ordering Information
SF58 S 006 V B B (R2000)
Reeled Part Number (Note)
Series
Modification Code
Connector Type
S: NON-ZIF structure
No. of Contacts
Plating Specification
B: Contact area: Au /
Connection area: Au flash plating
Connection Type
V: SMT mounting, with H/D
Note: An embossed tape reel contains 2,000 pieces.
Please contact us concerning packaging specifications.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
3/7
MB-0271-1
Part Number
Drawing Number
SF58S006VBB
SJ114918
NOTE3. VACUUM AREA
NOTE4. LOT INFORMATION IS SHOWN AS BELOW
e.g. 4303 1
PRODUCTION LINE No.
PRODUCTION DATE (YMDD)
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
Unit: mm
4/7
MB-0271-1
Recommended Tray
11.24
15.13
Unit: mm
Note 1: Above are recommended dimensions for tray designed by customers.
Note 2: Above drawing are for reference only. Please refer to the most updated
drawing when considering use of this product.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
5/7
MB-0271-1
Unit: mm
APPPLICABLE P.C.B. DIMENSION（REF.）
適 合 基 板 寸 法 （参 考）
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
6/7
MB-0271-1
Drawing Number
Technical Document No.
Product Drawings
Individual Product: SJ114918
Reel Product: SJ114919
Specification
JACS-10982
Handling Instruction JAHL-10982
Notice:
1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
For purchase, a product specification must be agreed upon.
2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the
suitability of JAE's products to the equipment.
3. The products presented in this brochure are designed for the uses recommended below.
We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended
applications or for a specific use that requires an extremely high reliability.
(1) Applications that require consultation:
(i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry,
such as:
Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion
control, fire prevention or security systems, disaster prevention equipment, etc.
(ii) We may separately give you our support with a quality assurance program that
you specify, when you think of a use such as :
Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
(2) Recommended applications include:
Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home
electric appliances, factory automation equipment, etc
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2882 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
7/7