COMPONENTS PRODUCT INFORMATION NEW Automotive High-speed Differential Transmission MX48 Series CONNECTOR MB-0249-1 July 2012 RoHS Compliant Along with the electro-mechanical advances taking place in cars, the number of parts used is increasing and there is a demand for more compact electrical units. At the same time, the use of displays is growing due to DVD watching in the back seat, safety checks using a rear monitor, and LCD type instrument panels. And as the displays become larger and high-definition the signal used is shifting from analog to digital high-speed differential transmission, which can transmit large amounts of data more efficiently. To meet these demands, JAE has developed the MX48 Series connector for automotive high-speed differential transmission. The MX48 Series is minimized in depth, height, and width compared to our previous product and achieves a 48% reduction in volume. It is also compatible with GVIF and LVDS transmission, which are ideal for the transmission of video signals in cars. * "GVIF" is a trademark of Sony Corporation. Features - Achieves a 48% reduction in volume compared to our previous product. - 2.0mm side pitch, 2-position signal lines. - Compatible with GVIF and LVDS transmission. - Impedance matching design, compatible with high-speed transmission. - Mechanical lock and twist-resistant structure for mated connector. - Dual-shield structure with ground terminals for EMI control. - Available as a completed harness to ensure transmission performance reliability. General Specifications - No. of Contacts: 2 positions - Dielectric Withstanding Voltage: AC1000 Vr.m.s. (applied voltage) per minute (mated condition) - Operating Temperature: -40 Deg. C to +85 Deg. C - Insulation Resistance: 100MΩ min. (mated condition) - Applicable Board Thickness: 1.6mm - Applicable Wire: Shielded twisted pair wire (for harness) - Connector Insertion Force: 70N max. JAE Connector 3rd Sales Div. Proprietary. Copyright © 2012，Japan Aviation Electronics Industry, Ltd. 1/4 MB-0249-1 Materials and Finishes ■Angle Pin Connector Component Signal Terminal Material / Finish Copper Alloy / Contact area: Au plating over Ni Board termination area: Sn plating External Housing SPS-GF30 Internal Housing LCP-GF35 Ground Terminal Shield Shell Copper Alloy / Sn Plating ■Socket Connector Component Signal Terminal Material / Finish Copper Alloy / Contact area: Au plating over Ni Board termination area: Sn plating External Housing Retainer PBT Internal Housing Holder LCP-GF35 Ground Terminal Copper Alloy / Sn Plating Cover Shell Sleeve Brass / Sn Plating JAE Connector 3rd Sales Div. Proprietary. Copyright © 2012，Japan Aviation Electronics Industry, Ltd. 2/4 Outer Dimensions MB-0249-1 ■ Angle Pin Connector (MX48002NQ1) Drawing No.: SJ110279 Unit: mm PANEL CUT OUT DIMENSION(REF.) APPLICABLE P.C.B. DIMENSION(REF.) JAE Connector 3rd Sales Div. Proprietary. Copyright © 2012，Japan Aviation Electronics Industry, Ltd. 3/4 MB-0249-1 ■ Socket Connector (for reference) Unit: mm Note: Socket connector is a harness product. It is not sold as an individual connector. Other Specifications Specifications JACS-10666 Notice: Products shown in this brochure are made Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for lifesupport systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE Connector 3rd Sales Div. Proprietary. Copyright © 2012，Japan Aviation Electronics Industry, Ltd. 4/4