bi441 short form 2007 dev.qxd 12 6/26/07 8:59 AM Page 12 Fixed Resistors BGA Networks BGA Network Model BB1110B/BB1110TB/BB2110DI BB1020DT Resistance Nominal, Ohms 20 to 100 475/121/425 Ball Size (mm) 0.64/0.76 0.64/0.76 Pitch (mm) 1.27, 1 1.27, 1 Absolute Tolerance (%) ±1 ±1 Ratio Tolerance (%) ±1 ±1 Temperature Coefficient of Resistance (ppm/˚C) ±200 ±100 Operating Temperature (˚C) -55 to 125 -55 to 125 Interlead Capacitance (pF) <0.1 <0.1 Application DDR SDRAM SCSI LVD Specifications subject to change without notice. Consult factory for custom products. Ordering Information Notes BGA Networks BGA Networks Features 1. Superior high frequency performance. 2. Minimal stray capacitance and inductance. 3. Surface mountable with automatic pick and place equipment. Applications 1. DDR memory termination: BB1110TB, BB1110B, BB2110DI a. 18 Bit SSTL-2 Termination Sets b. Compliant to JEDEC Standard 8-9A. 2. SCSI termination: BB1020DT7 a. SPI-2 (Ultra2) and SPI-3 (Ultra3) compliant b. LVD termination for up to 9 lines Packaging Reel Size (inches) Schematics BGA Networks www.bitechnologies.com Part Count 7 1000 13 4000 bi441 short form 2007 dev.qxd 6/26/07 8:59 AM Page 13 Fixed Resistors 13 Thick Film Resistor Networks Surface Mount 627T/V Through-Hole High Voltage Precision Divider, High Voltage L/M/BH BHV 2/3 Model 627/628 628 Ladder Number of Leads 14/16 16 14 4 to 14 Body Length, Maximum 0.395/0.445 0.445 0.395 0.1 x no. of leads 0.953 to 2.35 Height Off Board, Maximum 0.090 0.090 0.090 0.195 0.4 to 0.606 Body Style/Width (Thickness) (SO-M) 0.220 (SO-M) 0.220 (SO-M) 0.220 0.095 0.100 Range, Ohms 10 to 1 Meg 1K to 100K 50 to 142 22 to 1 Meg 1 Giga, Max. Tolerance (%) ±2 (±5 for J Circuits) ±2 ±2 ±2 (±1 Optional) ±1, ±5, ±10 Operating Temperature Range ˚C -55/125 -55/125 -55/125 Temp. Coefficient, ppm/°C ±100 (Below 100R, 250) ±100 ±250 ±100 (< 100W = ±250) ±150 (±100 Divider) Temp. Coefficient Tracking, ppm/°C ±50 ±50 ±50 ±50 0.125 Bussed 0.200 Isolated 0.8 to 3.0 Dimensions, Inches Resistance Ladder Accuracy 8 Bit: 1/2 LSB Power Rating, Watts at 70˚C Resistor Power Schematic A: 0.32 Schematics B & J: 0.16 0.04 0.250 Package Power 1.28 0.64 W/Pkg. 1.28 Operating Voltage 30kV (2kV for Precision Divider) Voltage Coefficient (ppm/V) 2 Max Packaging Options Tubes 50 50 50 2000 2000 2000 Tape & Reel: 7" Tape & Reel: 13" Specification subject to change without notice. Contact factory for custom products Also available: 627/628 Jumpers Schematics Ordering Information 62 8 N J 330 / 470 F TR4 BHV 10 Tape & Reel Opt.: Model Series 4 = 24mm RS D Tolerance Code (If other than standard): F = ±1% J = ±5% Circuit Type: A = Isolated B = Bussed J = Dual Terminator L = Ladder R2 Resistance Code: Add for J Circuit only Resistance Code 62 Model Series 7 Voltage Rating in KV Style RS = Polymer Coated with Solder pads RW = Epoxyed Coated with round wire RF = Epoxy Coated with flat leads PF = Polymer Coated with flat leads PW = Polymer Coated with round wire Absolute tolerance code F = ±1% G = ±2% J = ±5% K = ±10% R1 1 2 3 4 = 24mm Model Series 1 2 N/2 1 2 3 12 R R R 2R 1 N/2 11 11 10 1.15K 1.35K 800 83 R1 R2 R3 R4 1 9 8 6 V5 7 50 50 10 50 9 50 8 50 125 125 125 125 125 125 50 627V100 4 = 24mm R 100M 50 12 R 627T 13 14 13 R Dual Terminators BHV 14 Tape & Reel Opt.: 3 Bussed 10M 627V100 Tape & Reel Opt.: N/2 Isolated For dividers only XXX / YYY Where XXX = R1 + R2 YYY = R2 (lower value) 627 V100 TR4 R 2R 2R 2R 2R 2R 2R 2R 2R R2 Resistance Code First 2 Digits are significant last digit denotes No of trailing zeros D = Dividers only T 500 / 1250 TR4 16 N Ratio tolerance code (Dividers only) F = ±1% G = ±2% Model Series 627T 628 Ladder N XXX J F Number of Leads: 7 = 14 Leads 8 = 16 Leads 627/628 BHV 627/628/628 Ladder 50 50 2 3 50 4 50 5 50 6 7 142 R5 Number of Leads: 7 = 14 Leads Circuit Type: T = V.35 Termination Resistance Values Circuit Type: 1 GND 2 V1 3 V2 4 V3 5 V4 V100 = Pentium® Resistor Network www.bitechnologies.com bi441 short form 2007 dev.qxd 14 6/26/07 8:59 AM Page 14 Fixed Resistors Thick Film Chip Resistor Arrays Resistor Arrays Model BCN 10 4 BCN 16 4 BCN 16 8 Industrial Style, Inches (mm) 0804 (2010) 1206 (3216) 1206 (3216) Standard Resistance Range, Ohms 10 to 1 Meg 10 to 1 Meg 100 to 1 Meg Standard Resistance Tolerance (%) ±5 ±1, ±2, ±5 ±5 Temp. Coefficient of Resistance, ppm/°C ±250 ±250 ±200 Operation voltage 25Vdc 50Vdc 25Vdc Power Rating at 25°C per Resistor per Package 31mW 125mW 63mW 250mW 32mW 250mW Capacitance Range, pF (at 1Khz) Capacitor Characteristic Capacitor Tolerance Capacitor Voltage Rating Capacitor Dissipation Factor, Maximum Dielectric Withstanding Voltage, 50mA Chrg. Operating Temperature -55°C to +125°C -55°C to +125°C -55°C to +125°C Termination Options Convex Convex/Concave Convex Edge Options Square Square/Scalloped Square Paper: 10K Paper: 40K Paper: 5K Paper: 20K Paper: 5K Paper: 20K Packaging Options (Quantity/Reel) Tape & Reel: 7” Tape & Reel: 13” Surge Capability Short Term Overload Specifications subject to change without notice. Consult factory for custom products Also available BCN and BSR jumpers All BCN chip arrays are RoHS compliant Ordering Information BCN BCN BCN 16 4 A B I 102 J 7 Model Series Packaging Package Option: (see Table A) Width: 10 = 1.0mm 16 = 1.6mm 21 = 2.1mm 31 = 3.1mm 7" Reel Diameter 13" Reel Diameter Tolerance: F = ±1% (BCN 4D, BCN 16 4, BCN 31 8RB/8SB only) G = ±2% (BCN 16 4, BCN 31 8RB/8SB only) J = ±5% (Standard) (Use JP for Jumper Chip Array, BNC16 4, BNC 31) No of Resistors: BCN 10 = 4 Resistors BCN 16 = 4A Resistors BCN 16 8R or 8S = 8 Resistors BCN 21 = 8 Resistors BCN 31 8R or 8S = 8 Resistors Circuit Configuration: A = Isolated (BCN 10, BCN 16 4A) R = Bussed (Reversed) (BCN 16, 8R or BCN 31 8R) S = Bussed (Standard) (BCN 16 8S or BCN 21 8S) Paper BCN 10 5k 5k BCN 21 4k 16k Termination Code: I = Interior (concave) Termination No code used for exterior termination (Standard) All interior terminations require ‘B’ for square edge (BCN 16 4ABI, BCN 31 8RBI, BCn 31 8SBI) BCN 31 4k 16k BCN 16 8S & BCN 31 8S BCN 21 R2 R3 BCN 31 Ladder R R4 www.bitechnologies.com 20k See ‘Model Styles’ for Available Options: Note: Tape & Reel dimensions per EIA-481. 2R R R R1 20k Embossed BCN 16 8 BCN BCN 2D 40k BCN 16 4 Schematics R1 = R2 . . . Rn (n = 2,4) Paper Resistance Code: 3 Digits for E6, E12, E24 series, all tolerances 4 Digits for E96 series, 1% tolerance Edge Option: (B = Square edge) Scalloped Edge - No code used (Standard) Square Edge Only - Use Code 'B' BCN 10, & BCN 16 4 Embossed 10k 2R 2R 2R R R 2R 2R R 2R R 2R 2R bi441 short form 2007 dev.qxd 6/26/07 8:59 AM Page 15 15 Fixed Resistors Resistors Capacitor Networks Surge Resistors BCN 21 8 BCN 31 8 BCN 31 Ladder RC4 RC6 BSR Surge Resistors 1608 (4021) 2512 (6531) 2512 (6531) 206 (3216) 2512 (6531) 2512” (6531mm) 68 to 200K 22 to 1 Meg 1K to 100K 10 to 1 Meg 10 to 1 Meg 0.050 to 100K ±5 ±1, ±2, ±5 ±2 ±20 ±20 ±1, ±2, ±5, ±10, ±20 ±200 ±200 ±200 ±200 25Vdc 50Vdc 50Vdc 50Vdc 50Vdc 100Vdc 63mW 500mW 63mW 500mW 25mW 400mW 63mW 63mW 1W 2 W/Pkg. ±100ppm for values above 1W 10 to 220 10 to 220 X7R X7R 20% 20% 50 50 2.50% 2.50% 125Vdc, 5 sec. 125Vdc, 5 sec. 55°C to +125°C -55°C to +125°C -40°C to +125°C Concave Convex/Concave Convex -55°C to +125°C Convex -55°C to +125°C Square Square Square Square Embossed: 4K Embossed: 16K Embossed: 4K Embossed: 16K Embossed: 4K Embossed: 16K Paper: 5K Paper: 20K -55°C to +125°C Embossed: 4K Embossed: 16K Embossed: 4K 1.2/50µs, 250V; 10/700µs, 250V 2.5 x Rated Voltage All BCN and RC parts are RoHS Compliant Schematics Ordering Information BSR RC4 BSR BSR 1 120 J E Model Series R2 Resistance Code: First 2 Digits are significant last digit denotes No of trailing zeros Packing option E = Embossed Tape Resistance Tolerance: F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% RC6 RC4/RC6 Circuit A RC 6 E 101 M 101 M 7 Model Series Circuit B Circuit C 10 9 8 7 6 10 9 8 7 6 10 9 8 7 6 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 10 9 8 7 6 10 9 8 7 6 1 2 3 4 5 1 2 3 4 5 Packaging Option 7 = 7" Tape & Reel 13 = 13" Tape & Reel Size Code 4 = 1206 6 = 2512 Capacitor Tolerance: M = ±20% Circuit D Circuit Type Code used for R6 only refer to curuit schematics Resistance Code 3 digit code in ohms Circuit E Capacitor Code 3 digit code in picofarads Resistance Tolerance J = ±5% (optional) K = ±10% (optional) M = ±20% (standard) www.bitechnologies.com