Magnetics Business Unit Fast Facts HM72E-06 SERIES – MOLDED INDUCTOR The HM72E-06 series has been designed as a 155 C high temperature rated molded inductor for high stress environments that require high current saturation levels. It is ideal for high power density applications where size is critical. It is targeted at designers of dc-dc converters who require a buck, boost, or buck-boost inductor for voltage regulation at fast switching frequencies up to 3MHz.. It can also be used as a filter inductor for EMI noise reduction. Market Segments Features High Saturation Current per Unit Volume Medical Operating Temperature: -40°C to +155°C No Thermal Aging Issues Rust Resistant Low DCR Low Core Loss Magnetically Shielded Robust Construction High-end Industrial Applications DC-DC Converters Point-of-Load Modules Low pass Ripple Current Filters EMI Filters Benefits High operating temperature allows for higher ambient or higher temperature rise in circuit design Moisture resistant - molded body will not rust High power density can save board space and reduce weight for fuel cost savings © Copyright TT electronics, 2012. All rights reserved. Subject to change without prior notification. Issue: 2012.1 www.ttelectronics.com Magnetics Business Unit Fast Facts HM72E-06 SERIES – MOLDED INDUCTOR FEATURES BENEFITS High saturation current. Smaller part with less board space then lower weight and Fuel cost saving. Low Acoustic Noise Vs traditional construction No need to use an expensive epoxy and glue to avoid quality problems. Low Acoustic Noise Vs traditional construction Smaller PCB board, then lower weight and fuel cost saving. Higher operating temperature. Results in a Smaller device with less weight and Fuel cost saving. HA72E Molded Inductor Features Manufacturer PRODUCT Best in class Max operating temperature T°C. AECQ200 Pad composition TS16949 Technical support Saturation current. Custom design. Moisture Resistance (No Rust) TT ELECTRONICS. HM72A/B √ 155°C YES 100% Tin. YES YES EXCELLENT YES EXCELLENT Vishay. IHLP 155°C YES 100% Tin. YES NO EXCELLENT NO POOR Delta. MPL 125°C NO 100% Tin. NO NO Cyntec. PCMC 125°C NO 100% Tin. NO NO BOURNS SPR 125°C NO 100% Tin. NO NO TOKIN. MPC 125°C NO 100% Tin. NO NO © Copyright TT electronics, 2012. All rights reserved. Subject to change without prior notification. Issue: 2012.1 NO EXCELLENT NO NO POOR NO www.ttelectronics.com