HM13 Electrical / Environmental High Inductance High Frequency Toroidal Inductors • • • • Operating Temperature Range Insulation Resistance, Minimum Insulation System Temperature Rise, Maximum -40°C to +125°C 100MW Class B,130°C 40°C S RomHpliant Co Schematic (Figure 1 & 2) Specifications @ 25°C Part Number Inductance(1) Typical µH Current IDC Amps Max. DC Resistance ETop W Max. V-µSec Energy Storage µJ Min. Figure Mechanical Outline Dim. A Dim. B (mm) (mm) HM13-05001LF 500 0.60 0.40 150 90 1 29.21 24.13 HM13-10001LF 1000 0.35 1.00 200 60 1 29.21 24.13 HM13-20001LF 2000 0.25 1.40 300 60 1 29.21 24.13 HM13-05002LF 500 1.75 0.35 400 765 2 35.56 30.48 HM13-10002LF 1000 1.00 0.75 500 500 2 35.56 30.48 HM13-20002LF 2000 0.65 1.70 700 470 2 35.56 30.48 HM13-05003LF 500 2.75 0.25 750 1890 2 43.18 36.83 HM13-10003LF 1000 2.00 0.55 900 2000 2 43.18 36.83 HM13-20003LF 2000 1.50 0.80 1200 2250 2 43.18 36.83 Notes: (1) Inductance is measured at 100kHz, 0.1Vrms (@ DC current). (2) It is recommended that the temperature of the component (ambient plus temperature rise) does not exceed 125°C under worst case operating conditions. Outline Dimensions (mm) Figure 1 Note: Refer to Specifications table for ‘A’ & ‘B’ dimensions of each model. 14 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Outline Dimensions (mm) (Cont’d) Figure 2 Note: Refer to Specifications table for ‘A’ & ‘B’ dimensions of each model. Packaging Standard: Paper Packaging Case Size 1 2 3 Capacity Per Carton (Units) 400 268 168 Ordering Information HM13 - 0500 1 LF Lead-Free Model Series Inductance Value www.bitechnologies.com Case Size 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE We reserve the right to change specifications without prior notice. 15