HA65A Electrical / Environmental Surface Mount Power Inductors • • • • Operating Temperature Range Operating Current Solar Energy and hybrid car application AEC-Q200 certified -40°C to +155°C Up to 87Adc Specification @ 25°C Inductance(1) Part Number HA65A-25153R3LF HA65A-25154R7LF HA65A-25156R8LF HA65A-251510RLF HA65A-251515RLF HA65A-251522RLF HA65A-251533RLF @0Adc µH±10% Isat(2) (A) 3.3 4.7 6.8 10 15 22 33 87.0 61.0 46.0 31.8 22.0 15.5 10.3 Heating Current(3) (A) SRF (MHz) 26 24 21 17 14 10 9 6 DCR (mΩ) Typ. Max. 2.3 2.6 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) Isat is the saturation current at which inductance will be decreased by approximately 30% from its initial (0Adc) value. (3) The Heating Current is the DC current which causes the component temperature to increase by approximately 40°C. This current is determined by a temperature rise calculation. Part temperature should be verified at the end application. (4) The part temperature (ambient + temperature rise) should not exceed 155°C. Outline Dimensions (mm) Recommended PCB Layout 15.5 Max 26.5 Max 7.0 6.5 3 4.6 4.0 26.5 Max HA65A-261533RLF BI YYWW 16.0 4.0 2 3.8 1 16.2 7.0 5.8 16.2 MAGNETIC COMPONENTS We reserve the right to change specifications without prior notice. Updated: 05 Sep 2014 Page 1 OF 2 www.bitechnologies.com Electrical Characteristic @ 25°C Ind vs Current Packaging / Ordering Information HA65A - 2515 3R3 Lead Free Model Series Case Size One tray One shipping carton LF Inductance Code: “R” denotes a decimal point. 15pcs 135pcs MAGNETIC COMPONENTS We reserve the right to change specifications without prior notice. Updated: 05 Sep 2014 Page 2 OF 2 www.bitechnologies.com