NICHROME ON SILICON Isolated and Bussed Circuits Thin Film Resistor Networks RoHS compliant available FEATURES • Precision Nichrome Thin Film Resistor Networks • Industry standard packaging • Ratio tolerances of ±0.05% • TCR tracking tolerances of 5 ppm/°C • Exceptional Moisture Passivation SCHEMATICS ELECTRICAL1 2 Standard Resistance Range, Ohms 1K to 100K (Isolated) 1K to 30K (Bussed) Operating Temperature Range -55°C to +125°C Interlead Capacitance <2pF Insulation Resistance =10,000 Megohms Maximum Operating Voltage 100Vdc or vPR Noise, Maximum (MIL-STD-202, Method 308) 1 Specifications subject to change without notice. 2 E24 codes available. -25dB BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 25, 2005 page 1 of 3 BI technologies Nichrome on Silicon ENVIRONMENTAL (MIL-R-83401) Thermal Shock plus Power Conditioning ∆R 0.1% Short Time Overload ∆R 0.1% Terminal Strength ∆R 0.1% Moisture Resistance ∆R 0.1% Mechanical Shock ∆R 0.1% Vibration ∆R 0.1% Low Temperature Operation ∆R 0.05% High Temperature Exposure ∆R 0.1% Resistance to Solder Heat ∆R 0.1% Marking Permanency Per MIL-STD-202, Method 215 Flammability UL-94V-0 Rated Storage Temperature Range -55°C to +125°C MECHANICAL Lead Plating 80/20 Tin Lead (Standard) 100 matt Tin (RoHS Compliant) Lead Material Copper Alloy Lead Configuration Gull Wing Lead Coplanarity 0.004” (0.102 mm) Substrate Material Silicon Resistor Material Passivated Nichrome Body Material Molded Epoxy PACKAGE POWER, WATTS @ 70°C3 QSOP SOIC (Narrow) SOIC (Wide) P-DIP 16 20 24 8 14 16 16 20 24 8 14 16 0.75 1.0 1.0 0.4 0.7 0.8 1.0 1.2 1.2 0.4 0.6 0.8 POWER DERATING CURVE 3 Power per resistor @ 70°C, Maximum is 100 mW, not to exceed package power BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 25, 2005 page 2 of 3 BI technologies Nichrome on Silicon ORDERING INFORMATION4 S QS 16 A XXXX F S LF 13 Packaging Option: 7=7” Tape & Reel 13 = 13" Tape & Reel (No Code used for Tubes) Model Series: S = Passivated Nichrome on Silicon Package Type: Lead Finish: No Code=SnPb LF=Lead Free Lead Count: Circuit Type: A=Isolated B=Bussed TCR Code Tolerance Code Resistance Code PACKAGE TYPES (CODES) 5 Package Codes Lead count Mechanical Outline QSOP QS 16,20, 24 MO-137 SOIC narrow body SN 8, 14, 16 MS-012 SOIC wide body SW 16 MS-013 P-DIP PD 8, 14, 16 MS-001 RESISTANCE CODE6 First 3 digits are significant. Fourth digit denotes number of trailing zeros. For values less than 100, use “R” to denote a decimal point. Example, 51 and 10000 ohms is coded as 51R0 and 1002 respectively. RESISTANCE TOLERANCES5 Accuracy Code at 25°C A B D F G J Absolute Resistance Tolerances (%) ±0.1 ±0.1 ±0.5 ±1.0 ±2.0 ±5.0 Ratio Tolerances (R1 Ref) (%) ±0.05 ±0.1 ±0.1 ±1.0 N/A N/A TEMPERATURE COEFFICIENT OF RESISTANCE (TCR)7 TCR Code (-55°C to 125°C) Q P S L Absolute (ppm/°C) ±25 ±50 ±100 ±200 Tracking (R1 Ref) (ppm/°C) ±5 ±5 N/A N/A 4 Contact customer service for custom designs and features. 5 JEDEC (Publication 95) Reference only. 6 Consult factory for custom resistance values. 7 Consult factory for custom tolerance values. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 25, 2005 page 3 of 3 BI technologies