AP2301AGN (MN0330

AP2301AGN
RoHS-compliant Product
Advanced Power
Electronics Corp.
P-CHANNEL ENHANCEMENT MODE
POWER MOSFET
▼ Simple Drive Requirement
▼ Small Package Outline
D
▼ Surface Mount Device
BVDSS
-20V
RDS(ON)
97mΩ
ID
- 3.3A
S
SOT-23
Description
G
D
Advanced Power MOSFETs from APEC provide the
designer with the best combination of fast switching,
low on-resistance and cost-effectiveness.
G
S
The SOT-23 package is widely preferred for commercial-industrial
surface mount applications and suited for low voltage applications
such as DC/DC converters.
Absolute Maximum Ratings
Parameter
Symbol
VDS
Drain-Source Voltage
VGS
Gate-Source Voltage
[email protected]=25℃
[email protected]=70℃
Rating
Units
- 20
V
+8
V
3
-3.3
A
3
-2.7
A
Continuous Drain Current
Continuous Drain Current
1
IDM
Pulsed Drain Current
-15
A
[email protected]=25℃
Total Power Dissipation
1.38
W
TSTG
Storage Temperature Range
-55 to 150
℃
TJ
Operating Junction Temperature Range
-55 to 150
℃
Thermal Data
Symbol
Rthj-amb
Parameter
Maximum Thermal Resistance, Junction-ambient
Data and specifications subject to change without notice
3
Value
Unit
90
℃/W
1
200902043
AP2301AGN
Electrical [email protected]=25oC(unless otherwise specified)
Symbol
BVDSS
RDS(ON)
Parameter
Test Conditions
Drain-Source Breakdown Voltage
Static Drain-Source On-Resistance
2
Min.
Typ.
Max. Units
VGS=0V, ID=-250uA
-20
-
-
V
VGS=-4.5V, ID=-3A
-
-
97
mΩ
VGS=-2.5V, ID=-2.6A
-
-
130
mΩ
-0.3
-
-1
V
VGS(th)
Gate Threshold Voltage
VDS=VGS, ID=-250uA
gfs
Forward Transconductance
VDS=-5V, ID=-3A
-
14
-
S
IDSS
Drain-Source Leakage Current
VDS=-16V, VGS=0V
-
-
-1
uA
Drain-Source Leakage Current (Tj=55 C) VDS=-16V, VGS=0V
-
-
-10
uA
Gate-Source Leakage
VGS= +8V, VDS=0V
-
-
+100
nA
ID=-3A
-
12.5
21
nC
o
IGSS
2
Qg
Total Gate Charge
Qgs
Gate-Source Charge
VDS=-16V
-
1.5
-
nC
Qgd
Gate-Drain ("Miller") Charge
VGS=-4.5V
-
3.5
-
nC
VDS=-10V
-
8
-
ns
2
td(on)
Turn-on Delay Time
tr
Rise Time
ID=-1A
-
17
-
ns
td(off)
Turn-off Delay Time
RG=3.3Ω,VGS=-5V
-
24
-
ns
tf
Fall Time
RD=10Ω
-
33
-
ns
Ciss
Input Capacitance
VGS=0V
-
920
1470
pF
Coss
Output Capacitance
VDS=-20V
-
90
-
pF
Crss
Reverse Transfer Capacitance
f=1.0MHz
-
85
-
pF
Rg
Gate Resistance
f=1.0MHz
-
4.5
6.8
Ω
Min.
Typ.
IS=-1.2A, VGS=0V
-
-
-1.2
V
Source-Drain Diode
Symbol
VSD
Parameter
2
Forward On Voltage
2
Test Conditions
Max. Units
trr
Reverse Recovery Time
IS=-3.3A, VGS=0V,
-
25
-
ns
Qrr
Reverse Recovery Charge
dI/dt=100A/µs
-
12
-
nC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Pulse test
3.Surface mounted on 1 in2 copper pad of FR4 board ; 270℃/W when mounted on min. copper pad.
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
2
AP2301AGN
20
20
T A =25 o C
-5.0V
-4.5V
-3.5V
-2.5V
16
-ID , Drain Current (A)
16
-ID , Drain Current (A)
TA=150oC
-5.0V
-4.5V
-3.5V
-2.5V
V G = -1.5V
12
8
4
65mΩ
12
V G = -1.5V
8
4
0
0
0
1
2
3
4
5
0
-V DS , Drain-to-Source Voltage (V)
1
2
3
4
-V DS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
1.6
52
I D =-2.6A
I D = -3A
V GS = -4.5V
T A =25 o C
50
1.4
1.2
RDS(ON)
RDS(ON) (Ω )
48
46
1
44
0.8
42
0.6
40
1
2
3
4
-50
5
8
1.4
6
1.2
T j =150 o C
50
100
150
Fig 4. Normalized On-Resistance
v.s. Junction Temperature
Normalized -VGS(th) (V)
-IS(A)
Fig 3. On-Resistance v.s. Gate Voltage
4
0
T j , Junction Temperature ( o C)
-V GS , Gate-to-Source Voltage (V)
T j =25 o C
1
0.8
2
2.01E+08
0.6
0
0
0.4
0.8
1.2
-V SD , Source-to-Drain Voltage (V)
Fig 5. Forward Characteristic of
Reverse Diode
1.6
-50
0
50
T j , Junction Temperature (
100
o
150
C)
Fig 6. Gate Threshold Voltage v.s.
Junction Temperature
3
AP2301AGN
f=1.0MHz
12
10000
I D = -3A
V DS = -16V
8
65mΩ
1000
6
Coss
4
100
Crss
2
0
10
0
5
10
15
20
25
1
30
5
Q G , Total Gate Charge (nC)
9
13
17
21
25
-V DS , Drain-to-Source Voltage (V)
Fig 7. Gate Charge Characteristics
Fig 8. Typical Capacitance Characteristics
100
Normalized Thermal Response (Rthja)
1
10
100us
-ID (A)
Ciss
C (pF)
-VGS , Gate to Source Voltage (V)
10
1
1ms
10ms
0.1
100ms
1s
DC
o
T A =25 C
Single Pulse
DUTY=0.5
0.2
0.1
0.1
PDM
t
T
0.05
Duty factor = t/T
Peak Tj = PDM x Rthja + T a
0.02
Rthja = 270℃/W
0.01
Single Pulse
0.01
0.01
0.1
1
10
100
0.0001
0.001
0.01
-V DS , Drain-to-Source Voltage (V)
Fig 9. Maximum Safe Operating Area
0.1
1
10
100
1000
t , Pulse Width (s)
Fig 10. Effective Transient Thermal Impedance
VG
VDS
90%
QG
-4.5V
QGS
QGD
10%
VGS
td(on) tr
Charge
Q
td(off) tf
Fig 11. Switching Time Waveform
Fig 12. Gate Charge Waveform
4