PCA-6010 PICMG 1.0 Full-sized Intel® LGA775 Processor Card with VGA/Dual Gigabit LAN Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following items have been shipped: • 1 PCA-6010 Intel® LGA775 processor-based single board computer • 1 PCA-6010 Startup Manual • 1 CD with driver utility and manual (in PDF format) • 1 FDD cable p/n: 1700340640 • 1 Ultra ATA 66/100 IDE cables p/n: 1701400452 • 2 Serial ATA HDD data cable p/n: 1700003194 • 2 Serial ATA HDD power cable p/n: 1703150102 • 1 Printer (parallel) port & COM p/n: 1701260305 port cable kit • 1 Y cable for PS/2 keyboard p/n: 1700060202 and PS/2 mouse • 1 USB cable with 4 ports p/n: 1700008461 • ATX 12 V power converter cable p/n: 170304015K • Jumper pack p/n: 9689000068 • User Note for Full-Size CPU card p/n: 2002721020 • User Note for LGA775 CPU • Warranty card If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note1: For detailed contents of PCA-6010, please refer to information on the enclosed CD-ROM (in PDF format). Acrobat Reader is required to view any PDF file. Note2: Acrobat Reader can be downloaded at: www.adobe.com/Products/acrobat/readstep2. html (Acrobat is a trademark of Adobe.) Note3: PCA-6010 must use a proprietary CPU cooler, we strongly recommend purchasing it from Advantech (p/n: 1750000332). For more information on this and other Advantech products, please visit our website at: http://www.advantech.com http://www.advantech.com/epc For technical support and service, please visit our support website at: http://www.advantech.com/support This manual is for the PCA-6010 series Rev. A1 Part No. 2002601011 2nd Edition May 2009 Standard SBC functions • CPU: Intel Core® 2 Duo Desktop Long-term supported Processor P/N: E7400, E6400, Intel Pentium® Dual-Core E4300, E2160, Desktop Processor Celeron 440, Intel Celeron® Processor 400 Pentium 4 651/551, Intel Pentium D Processor Celeron D 352/341 Intel Pentium 4 Processor Intel Celeron D Processor • BIOS: Award® SPI 8 Mb Flash memory BIOS • Chipset: Intel 945GC with ICH7 • System memory: Dual Channel; Two 240-pin DIMM sockets accepts up to 4 GB DDR2 533/667 SDRAM • SATA/IDE interface: Supports up to four SATA2 HDD (300 MB/s) ; Support two IDE devices. The IDE port may be altered to a Type II CF socket. • FDD interface: Supports up to two FDDs • Serial ports: Two serial RS-232 ports • Parallel port: One SPP/EPP/ECP parallel port • Keyboard/mouse connector: One standard PS/2 keyboard/mouse connector and one external 6-pin header. • Watchdog timer: 255 level timer intervals • USB (2.0): 8 Universal Serial Bus ports on board VGA Interface • Chipset: Intel 945GC integrated • Display memory: Shared with 224 MB system memory • Video Output: Up to 2048 x 1536 @ 75 Hz refresh Ethernet Interface • Chipset: LAN 1/2: Intel® 82574L • Connection: Onboard RJ-45 connector Mechanical and Environmental • Dimensions (L x W): 338 x 122 mm • Power supply voltage: +5 V ~ ±12 V • Power requirements: Configuration 1: - CPU: Intel Core 2 Duo processor E4300 (1.8 G, 65 W) - Memory: 2 DDR2 667 MHz 4 GB DIMMs - Test program: Intel Max power 100% + BurnIn Test 4.0 +5 V @ 5.19 A, +12 V @ 3.85 A, +3.3 V @ 0A, +5 VSB @ A, -12 V @ 0A, -5 V @ 0A Configuration 2: - CPU: Intel P4 processor 670 (3.8 G, 115 W) - Memory: 2 DDR2 667 MHz 4 GB DIMMs - Test program: Intel Max power 100% + BurnIn Test 4.0 +5 V @ 4.85 A, +12 V @ 12.45 A, +3.3 V @ 0A, +5 VSB @ 0.07 A, -12 V @ 0A, -5 V @ 0A • Operating temperature: 0 ~ 60° C (depending on CPU) • Weight: 0.5 kg (weight of board) PCA-6010 Startup Manual Jumpers and Connectors The board has a number of connectors and jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the connectors and jumpers. IDE1 Label Function CMOS1 CMOS clear JWDT1 Watchdog timer output selection CMOS1: CMOS clear function Connectors Label Jumpers Function IDE connector Closed Pins Result 1-2 Keep CMOS data * 2-3 Clear CMOS FDD1 Floppy drive connector LPT1 Parallel port VGA1 VGA connector COM1 Serial port: COM1; RS232 (9-pin D-sub) JWDT1: Watchdog timer output option COM2 Serial port: COM2; RS-232 (10-pin Box Header) Closed Pins Result KBMS1 PS/2 keyboard and mouse connector 1-2 IRQ11 KBMS2 External keyboard/mouse connector 2-3 System reset * JIR1 Infrared connector CPUFAN1 CPU1 FAN connector JFP1 Power and Reset Button connector JFP2 HDD LED/Speaker connector JFP3 Power LED and keyboard lock connector JOBS1 HW Monitor Alarm Close: Enable OBS Alarm Open: Disable OBS Alarm LAN1 LAN RJ45 connector HDAUD1 HD Audio connector SATA1 Serial ATA1 SATA2 Serial ATA2 SATA3 Serial ATA3 SATA4 Serial ATA4 LANLED1 LAN1 LED connector USB12 Two USB port pin headers USB34 Two USB port pin headers This device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditions. USB56 Two USB port pin headers 1. This device may not cause harmful interference. USB78 Two USB port pin headers 2. DIMMA1 Memory connector channel A This device must accept any interference received, including interference that may cause undesired operation. DIMMB2 Memory connector channel B LPC1 Low pin count connector DVI1 Optional SPI1 BIOS SPI Interface JCASE1 Case open PCA-6010 Startup Manual 1 * default setting 2 1 3 2 3 * default setting Software Installation The CD disc contains a driver installer program that will lead you through the installation of various device drivers needed to take full advantage of your CPU card. Caution! The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by Advantech. Discard used batteries according to manufacturer’s instructions. Safety Information Board Layout The locations of all connectors and jumpers: Board Layout: Jumper and Connector Location PCA-6010 Startup Manual