ADAM-6050W ADAM

ADAM-6050W
ADAM-6060W
Wireless Web-enabled 18-channel
DI/O Module
Wireless Web-enabled 6-channel
Relay Output
Features
NEW
 Supports IEEE802.11b wireless LAN
 Built-in web page
 Supports Modbus/TCP & UDP protocols
 Supports event trigger function
Introduction
ADAM-6050W and ADAM-6060W are new ADAM-6000 I/O modules bundled with wireless LAN technology. The hardware design of these two modules were based on ADAM-6050
and ADAM-6060, but a wireless LAN interface replaces the RJ-45 Ethernet port. ADAM-6050W and ADAM-6060W Wireless Web-enabled modules support IEEE802.11b. They can
be accessed via wireless LAN without any hardwiring for environments with wiring limitations.
Specifications
Specifications
ADAM-6050W




Communication Port
Channels
I/O Type
Digital Input
 Digital Output







ADAM-6060W
IEEE802.11b Wireless LAN
18
12 DI & 6 DO
Dry Contact:
Logic level 0: Close to GND
Logic level 1: Open (Logic level status can be inversed
by Utility)
Open Collector to 30 V
200 mA max. load
5000 VRMS
Optical Isolation
Built-in Watchdog Timer
Built-in Web Page
Support Protocol
Modbus/TCP and UDP
Power Requirement
24 VAC
Power Consumption
2 W (typical)
Environment
Operating Temp. : -10 ~ 60 °C (14 ~ 140 °F)
Storage Temp. : 25 ~ 85 °C (-13 ~ 185 °F)
Humidity : 5 ~ 95% non-condensing
Ordering Information
 ADAM-6050W-A
 ADAM-6060W-A
 Channels
12
 I/O Type
6 Relay & 6 DI
 Relay Output (Form A) Contact rating: AC: 120 V @ 0.5 A, DC: 30 V @ 1 A
Breakdown voltage: 500 VAC (50/60 Hz)
Relay on time: 7 msec;Relay off time: 3 ms
Total switching time: 10 ms
Insulation resistance: 1000 MΩ minimum at 500 VDC
 Digital Input
Dry Contact:
Logic level 0: Close to GND
Logic level 1: Open
(Logic level status can be inversed by Utility)
 Optical Isolation
2000 VRMS
 Built-in Watchdog Timer
 Built-in Web Page
 Support Protocol
Modbus/TCP and UDP
 Power Requirement
24 VAC
 Power Consumption
2 W (Typical)
 Environment
Operating Temp. : -10 ~ 60 °C (14 ~ 140 °F)
Storage Temp. : -25 ~ 85 °C (-13 ~ 185 °F)
Humidity : 5 ~ 95% non-condensing
18 channel Web-enabled Wireless LAN Digital Input/
Output Module
12 channel Web-enabled Wireless LAN Digital Input/
Relay Output Module
Smart Web Ethernet I/O Modules
All product specifications are subject to change without notice
Last updated : January 2005
ADAM-6050W
ADAM-6060W
Feature Details
ADAM-6050W and ADAM-6060W support IEEE802.11b , the most popular wireless LAN
standard. So ADAM-6050W and ADAM-6060W can be connected through most wireless
LAN Access Points (AP).
Communication
Like other ADAM-6000 modules, ADAM-6050W and ADAM-6060W also support the
Modbus/TCP and UDP protocols. You can use the HMI/SCADA software to communicate
with ADAM-6050W and ADAM-6060W through Modbus/TCP. The pre-built UDP
protocol supports event trigger and data streaming functions for critical and real time
responses.
All New Built-in Web Page
ADAM-6050W and ADAM-6060W has a built-in webpage that can be configured by an
utility for: Tag Name, Status Label (for example, Start/Stop, Run/Stop, Enable/Disable and
Alarm/Normal), and Channel Enable. There is no need to learn how to write Java applets
to design a customized web page. By using ADAM-6000 utility software, the webpage
can be customized to exact requirements.
Home/Building Application
Port Crane Monitoring & Control
Application
Online Download www.advantech.com/products
All product specifications are subject to change without notice
Last updated : January 2005