S6SAL211A94SA2001 Intelligent LED Lighting Starter Kit for BLE

S6SAL211A94SA2001
Intelligent LED Lighting Starter Kit for BLE Communication
4ch 72W LED Driver Board
Operation Manual
Publication Number S6SAL211A94SA2001_SS901-00042
CONFIDENTIAL
Revision 1.0
Issue Date July 17, 2015
v1.1
O P E R A T I O N
M A N U A L
Preface
This manual explains how to use the evaluation board. Be sure to read this manual before using the product.
For this product, please consult with sales representatives or support representatives.
Handling and Use
Handling and use of this product and notes regarding its safe use are described in the manuals.
Follow the instructions in the manuals to use this product.
Keep this manual at hand so that you can refer to it anytime during use of this product.
Notice on this Document
All information included in this document is current as of the date it is issued. Such information is subject to
change without any prior notice.
Please confirm the latest relevant information with the sales representatives.
2
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
M A N U A L
Caution of the Products Described in this Document
The following precautions apply to the product described in this manual.
WARNING
WARNING
Electric Shock,
Damage
Electric Shock,
Damage
Indicates a potentially hazardous situation which could result in death or serious injury and/or a
fault in the user’s system if the product is not used correctly.
Do not look directly at LED. There is a possibility that your eye is hurt.
Before performing any operation described in this manual, turn off all the power supplies to the
system.
Performing such an operation with the power on may cause an electric shock or device fault.
Once the product has been turned on, do not touch any metal part of it.
Doing so may cause an electric shock or device fault.
Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this
CAUTION
product or devices connected to it, or may cause to loose software resources and other
properties such as data, if the device is not used appropriately.
Before moving the product, be sure to turn off all the power supplies and unplug the cables.
Cuts, Damage
Watch your step when carrying the product. Do not use the product in an unstable location such
as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to
fall, resulting in an injury or fault.
Cuts
The product contains sharp edges that are left unavoidably exposed, such as jumper plugs.
Handle the product with due care not to get injured with such pointed parts.
Do not place anything on the product or expose the product to physical shocks. Do not carry the
Damage
product after the power has been turned on.
Doing so may cause a malfunction due to overloading or shock.
Since the product contains many electronic components, keep it away from direct sunlight, high
Damage
temperature, and high humidity to prevent condensation. Do not use or store the product where
it is exposed to much dust or a strong magnetic or electric field for an extended period of time.
Inappropriate operating or storage environments may cause a fault.
Damage
Use the product within the ranges given in the specifications.
Operation over the specified ranges may cause a fault.
To prevent electrostatic breakdown, do not let your finger or other object come into contact with
Damage
the metal parts of any of the connectors. Before handling the product, touch a metal object
(such as a door knob) to discharge any static electricity from your body.
When turning the power on or off, follow the relevant procedure as described in this document.
Damage
Before turning the power on, in particular, be sure to finish making all the required connections.
Furthermore, be sure to configure and use the product by following the instructions given in this
document. Using the product incorrectly or inappropriately may cause a fault.
Because the product has no casing, it is recommended that it be stored in the original
Damage
packaging. Transporting the product may cause a damage or fault. Therefore, keep the
packaging materials and use them when re-shipping the product.
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
3
V1.1
O P E R A T I O N
M A N U A L
Table of Contents
1. Description ............................................................................................................................................... 7
2. Evaluation Board Specification .............................................................................................................. 8
3. Pin Descriptions ...................................................................................................................................... 8
3.1 Input/Output Connecter Descriptions.............................................................................................. 8
4. Setup and Verification ............................................................................................................................. 9
4.1 Contents in a Package ................................................................................................................... 9
4.2 Evaluation with BLE Communication .............................................................................................. 9
4.2.1 Operation .......................................................................................................................... 10
4.2.1.1
Connection of the Evaluation Board and LED ................................................... 11
4.2.1.2
Setup with BLE Communication ....................................................................... 12
4.3 Function of Application ................................................................................................................. 13
4.3.1 "SEEKBAR" Tab................................................................................................................ 13
4.3.2 "TABLE" Tab ..................................................................................................................... 13
4.3.3 "SCENE" Tab .................................................................................................................... 14
4.3.4 "SENSOR" Tab ................................................................................................................. 14
4.3.4.1
Example of Sensor Use .................................................................................... 15
4.3.4.2
S6Al211A94 Control Command ........................................................................ 15
4.3.4.3
BLE Module Control Command ........................................................................ 16
4.4 How to Do When LED Lighting can not be Controlled. ................................................................. 17
5. Layout ..................................................................................................................................................... 18
5.1 Component Layout ....................................................................................................................... 18
5.2 Wiring Layout ............................................................................................................................... 19
6. Circuit Schematic .................................................................................................................................. 20
7. Component List ..................................................................................................................................... 22
8. Board Picture ......................................................................................................................................... 23
9. Ordering Information ............................................................................................................................. 24
10. Major Changes ....................................................................................................................................... 24
Figures
Figure 1-1 Board Outline ............................................................................................................................ 7
Figure 2-1 Evaluation Board Specification ................................................................................................. 8
Figure 4-1 Contents Picture ....................................................................................................................... 9
Figure 4-2 Board Connection ................................................................................................................... 10
Figure 4-3 Connection of the Evaluation Board and LED .......................................................................... 11
Figure 4-4 Connection of the Evaluation Board and Thermistor ................................................................ 11
Figure 4-5 Example of Sensor Use .......................................................................................................... 15
Figure 5-1 Evaluation Board Component Layout ..................................................................................... 18
Figure 5-2 Evaluation Board Wiring Layout .............................................................................................. 19
Figure 6-1 Evaluation Board Circuit Schematic ........................................................................................ 20
Figure 6-2 Evaluation Board Circuit Schematic ........................................................................................ 21
Figure 8-1 Evaluation Board Picture......................................................................................................... 23
4
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
M A N U A L
Tables
Table 3-1 Input/Output Pin Descriptions ..................................................................................................... 8
Table 4-1 S6SAL211A94SA2001 Contents List .......................................................................................... 9
Table 4-2 BLEGET Command .................................................................................................................. 16
Table 4-3 BLESET Command .................................................................................................................. 16
Table 7-1 Evaluation Board Component List ............................................................................................ 22
Table 9-1 Ordering Information ................................................................................................................. 24
Table 10-1 Major Changes ....................................................................................................................... 24
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
5
V1.1
O P E R A T I O N
6
CONFIDENTIAL
M A N U A L
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
S6SAL211A94SA2001
Intelligent LED Lighting Starter Kit for BLE Communication
4ch 72W LED Driver Board
Operation Manual
1.
Description
S6SAL211A94SA2001 is the starter kit tool for BLE (*1) communication.
This kit is assumed for the application such as ceiling lights.
The tool has an evaluation board and a BLE board.
The evaluation board implements S6AL211A94, and LED driver controlled by BLE communication.
It is necessary to prepare DC 24V power supply, DC input cable, Android terminal (*2), Application software,
LED module and connection cable.
®
*1: BLE: Bluetooth Low Energy
*2: Prepare an Android terminal with Android OS 4.4.2 or 4.4.4.
Figure 1-1 Board Outline
DC 24V
LED
DC input cable
S6SAL211A94SA2001
Android terminal
*Android4.4.2 or 4.4.4
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
7
V1.1
O P E R A T I O N
2.
M A N U A L
Evaluation Board Specification
Figure 2-1 Evaluation Board Specification
Item
Symbol
Min.
Typ.
Max.
Unit
Input voltage
24V VIN
22
24
26
V
Output LED voltage
VLEDout
-
18
-
V
CH 1: ILEDout(W)
CH 2: ILEDout(R)
Output LED current
CH 3: ILEDout(G)
1000
-
-
CH 4: ILEDout(B)
Board size
3.
-
1000
mA
1000
1000
mm
90  85
Pin Descriptions
3.1
Input/Output Connecter Descriptions
Table 3-1 Input/Output Pin Descriptions
Connecter Symbol
I/O
Function Description
Initial Setting
J1
I
24Vdc power supply terminal, 24V VIN
-
J12,J13,J14,J15
O
CH1 -CH4 LED terminal, connect the LED
-
UART communication terminal for BLE module, ZigBee
module, MCU or the communication module with UART
J6
I/O
3V : Power for external module
-
GND: GND terminal
RX: Read terminal of S6AL211A94
TX: Transmission terminal of S6AL211A94
SENSE3: Ambient light sensor input terminal
J7
I/O
3V: Power for external module
GND: GND terminal
SENSE4: Human sensor detect input terminal
J8
I/O
3V: Power for external module
GND: GND terminal
SENSE3
connect to GND
SENSE4
connect to GND
Mode setting
J9
I/O
3V: Power for external module
DIN1
GND: GND terminal
connect to 3V
Connect to VO pin output of S6AL211A94 level
Mode setting
3V: Power for external module
DIN2
GND: GND terminal
connect to GND
J10
I/O
J11
O
IC status output pin
-
J16
I
Temperature sensor connection
-
J17
-
GND terminal for Temperature sensor
-
Connect to GND level
8
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
4.
M A N U A L
Setup and Verification
4.1
Contents in a Package
Table 4-1 S6SAL211A94SA2001 Contents List
No.
Contents
Description
Quantity
Notes
1
S6SAL211A94-EVB-CN01
Evaluation board of 4CH 72W with S6AL211A94
1
-
2
BLE Board
BLE board with MBH7BLZ02
1
-
3
Leaflet
Described startup information
1
-
Figure 4-1 Contents Picture
1
4.2
2
3
Evaluation with BLE Communication
Using Items for Evaluation with BLE Communication
 Evaluation board
 BLE Board
 DC power supply (24V)
 Android terminal with Android OS 4.4.2 or 4.4.4.
 Application software
 LED module(5 series  4ch)
 Connection cable
1pic (*1)
1pic (*1)
1pic (*2)
1pic (*2)
1pic (*3)
1set (*2)
1set (*2)
*1: Included in a package.
*2: Please prepare. Refer to 4.2.1 Operation.
*3: Please download it from our device home page.
URL:
http://www.spansion.com/Products/Analog/Power-Management-ICs/Pages/category-led.aspx#S6A
L211A
S6AL211A94: BLE Application software file BLExLED.apk in S6AL211_BLExLED.cab
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
9
V1.1
O P E R A T I O N
4.2.1
M A N U A L
Operation
WARNING
1.
2.
3.
4.
5.
6.
7.
8.
Do not look directly at LED. There is a possibility that your eye is hurt.
Connect DIN1 to 3V (J9) and DIN2 to GND (J10), connect SENSE3 and SENSE4 to GND (J7, J8).
Connect BLE Board to J6 of the evaluation board. (*4)
Connect the 4 channels LED to J12, J13, J14, J15. (*1)
Set some attributes in the application of Android terminal. (*2)
Connect J1 of the evaluation board to DC power supply.
Connect Android terminal to BLE module by BLE communication. (*2)
When connection succeeds, it is possible to make them do various movement by application. (*3)
When ending operation, make the brightness level of the LED "0" and tap "Disconnect" button of "HOME"
tab and cut power supply.
Figure 4-2 Board Connection
Android
terminal
LED
(*1)
DC 24V
Input
*1: Refer to 4.2.1.1 Connection of the Evaluation Board and LED.
*2: Refer to 4.2.1.2 Setup with BLE Communication.
*3: Refer to 4.3 Function of Application.
*4: Direction Caution
10
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
4.2.1.1
M A N U A L
Connection of the Evaluation Board and LED
Figure 4-3 Connection of the Evaluation Board and LED
Evaluation board
LED
CH4: Blue
(*1)
CH3: Green
(*1)
CH2: Red
(*1)
CH1: White
(*1)
*1: Connect LED to J12, J13, J14,J15.
Driver's output channel and color of LED are fixing by application software.
To indicate correct color, connect each channel exactly.
Specification of LED module: 5-series.
White: IF ≥ 1A, VF ≈ 3.2 V
Ex: LUW W5AM (OSRAM)
Red: IF ≥ 1A, VF ≈ 2.2 V
Ex: LR W5AM (OSRAM)
Green: IF ≥ 1A, VF ≈ 3.3 V
Ex: LT W5AM (OSRAM)
Blue: IF ≥ 1A, VF ≈ 3.2V
Ex: LB W5AM (OSRAM)
Be careful about polarity.
When using thermistor, refer to Figure 4-4.
Thermistor is an option. Even if that isn't connected, a board operates.
Figure 4-4 Connection of the Evaluation Board and Thermistor
Evaluation board
Thermistor
J16
TEMPx
J17
Ex: NTCG104EF104FT1
(TDK)
GND
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
11
V1.1
O P E R A T I O N
4.2.1.2
M A N U A L
Setup with BLE Communication
1. Start "BLExLED" by tapping icon in android tablet. (In advance, set on Bluetooth in Android OS)
Set some attributes in the application. (Device Name #0)
2. Connect AC plug to AC power supply.
3. Tap "Connect" button in "HOME" tab. If connection succeeds, "BLE Connection SUCCESS!" is indicated
in the display.
4. Refer to 4.3 Function of Application and operate.
Starting App
Setting of the Attribute (In Setting Page)
Cypress
Cypress
Cypress Demo
"Cypress Demo"
← Check
Return to “HOME” tab
Connecting to BLE Module with BLE Communication
Cypress
Cypress
Cypress
Cypress
Cypress
Cypress
12
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
M A N U A L
4.3 Function of Application
4.3.1
"SEEKBAR" Tab
It is possible to change the brightness of each LED by swiping level of seek bar.
When releasing a finger, brightness of LED changes.
Total maximum Output power is about 72W.
When lighting White LED, make the lighting level of RGB LED "0".
When lighting RGB LED, make the lighting level of White LED "0".
4.3.2
"TABLE" Tab
It's possible to change the brightness of the White LED by swiping level of White Seek bar.
It's possible to change color brightness of the RGB LED by swiping level of Strength Seek
bar.
It's possible to change the color of LED by tapping color table.
When Strength Seek bar level is "0", RGB LED goes out.
Total maximum Output power is about 72W.
When lighting White LED, make the lighting level of RGB LED "0".
When lighting RGB LED, make the lighting level of White LED "0".
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
13
V1.1
O P E R A T I O N
4.3.3
M A N U A L
"SCENE" Tab
"Preset Lighting" is operated by this table.
Reading: Bright white lighting
Dinner: Warm white lighting
CYPRESS: Cypress blue color
ALERT: Switching white and red (Sequence per second)
Wakeup: gradually brighter (5 seconds sequence)
Rainbow: Automatic color control
Stop: Stop sequence of "ALERT", "Wake up" and "Rainbow".
4.3.4
"SENSOR" Tab
It's possible to set a sensor setting and dimming curve at this table.
Dimming curve type select "Linear" or "Log"
It's possible to change the brightness of the white LED by swiping level of white seek
bar.
Fade Time: Setting of fade time
When installing a sensor, below is used. (*1)
Motion: Motion sensor on/off, stand-by detection time select "10sec" or "5min"
Illuminance: Illuminance sensor on/off (*2)
Common: It's used for setting change. The following item can be chosen by a
pulldown.
QUERYS: S6Al211A94 memory reading command (*3)
MEMSET: S6Al211A94 memory writing in command (*3)
BLEGET: BLE module memory reading command (*4)
BLESET: BLE module memory writing in command (*4)
*1: Refer to 4.3.4.1 Example of Sensor Use.
*2: When using a motion sensor, illumination sensor can not be used.
*3: Refer to 4.3.4.2 S6Al211A94 Control Command.
*4: Refer to 4.3.4.3 BLE Module Control Command.
14
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
4.3.4.1
M A N U A L
Example of Sensor Use
When using the sensor function of the application, prepare the outside sensor parts.
The recommended parts are as follows.
Figure 4-5 Example of Sensor Use
Illuminance Sensor
3V
Evaluation board
J7
C
3V
SENSE3
S6AL211A94
GND
48:VO
39:SENSE3/ADD3
J8
40:SENSE4/ADD4
E
0.1 μF
Motion Sensor
Ex: NJL7502L
JRC
6.5 kΩ
Vdd
3V
0.1 μF
SENSE4
0.1 μF
GND
4.3.4.2
Ex: EKMB130111
Panasonic
OUT
GND
S6Al211A94 Control Command
QUERYS: "1st argument: read address" is input, and "Send" button is pushed.
Data or "TRUE" or "FALSE" of memory is indicated.
MEMSET: "1st argument: write address" and "2nd argument: write data" is input, and "Send" button is
pushed.
"OK" is indicated.
Note: Refer to hardware manual of S6AL211A94 for details of the address and write data.
Ex: QUERYS
Ex: MEMSET
Read address
Write address
Read data
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
Write data
Data transmission completion
15
V1.1
O P E R A T I O N
4.3.4.3
M A N U A L
BLE Module Control Command
Table 4-2 BLEGET Command
Command
1st
2nd
Argument
Argument
Address
Data
00
00
01
BLEGET
01
-
Function
Response
Turning on the lights threshold reading of
illumination sensor
HH LL<CR><LF>
Turning off the lights threshold reading of
(*1)
illumination sensor
Reply interval time reading of illumination
HH LL<CR><LF>
sensor
(*2)
Initial Value
00 02
00 08
00 05
Table 4-3 BLESET Command
Command
1st
2nd
3rd
4th
Argument
Argument
Argument
Argument
Address
Address/Data
Data
Data
HH (*1)
BLESET
LL (*1)
01
01
HH (*2)
Response
Turning on the lights threshold writing of
00
00
Function
illumination sensor
Turning off the lights threshold writing of
OK<CR><LF>
illumination sensor
LL (*2)
-
Reply interval time writing of illumination
sensor
OK<CR><LF>
*1: Threshold (hexadecimal number). HH: Upper 2bit data, LL: Lower 8bit data
Only lower rank 2bit is effective for HH data.
Set Turning on the lights threshold smaller than Turning off the lights threshold.
*2: Reply interval time (hexadecimal number). HH: Upper 2bit data, LL: Lower 8bit data
Unit: 0.1 ms, Setting area: 0.1 ms to 6553.5 ms
Ex: BLEGET
Ex: BLESET
Read address
Write address
Read data
16
CONFIDENTIAL
Write data
Data transmission completion
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
4.4
M A N U A L
How to Do When LED Lighting can not be Controlled.
1. Turn off DC power supply.
2. Exit "BLExLED" application.
3. Turn off Bluetooth indicator in Android OS.
4. Turn on Bluetooth indicator in Android OS.
5. Turn on DC power supply.
6. Start "BLExLED".
(Continue as above-mentioned)
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
17
V1.1
O P E R A T I O N
5.
M A N U A L
Layout
5.1
Component Layout
Figure 5-1 Evaluation Board Component Layout
Board size: 90mm x 85mm
Layer1 (Top View)
Layer2 (Top View)
18
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
5.2
M A N U A L
Wiring Layout
Figure 5-2 Evaluation Board Wiring Layout
Layer 1 (Top View)
Layer 2 (Top View)
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
19
V1.1
O P E R A T I O N
6.
M A N U A L
Circuit Schematic
Figure 6-1 Evaluation Board Circuit Schematic
3V
J6
3V
TX 1
RX 2
8
3
6
4
5
R1
R2
RX
7
J9
3V
34 IF1
35 IF2
TX
3V
U1
R3
3V
10 DIN1
DIN1
GND
3V
J10 DIN2
R4
SCL 12
SDL 13
11 DIN2
GND
J7
3V
37 SENSE1
SENS3
38 SENSE2/ADD2
GND
39 SENSE3/ADD3
40 SENSE4/ADD4
J8
41 ADD5
3V
42 ADD6
SENS4
43 ADD7
GND
44 ADD8
24 CS_1P
CS_1P
25 CS_1N
CS_1N
26 CS_2P
CS_2P
27 CS_2N
CS_2N
J17
CS_3P
GND
GND
GND
GND
CS_3N
DRV_1 5
DRV_2 6
DRV_1
DRV_2
DRV_3 8
DRV_4 9
DRV_3
DRV_4
SH_1 14
SH_2 15
SH_1
SH_2
SH_3 17
SH_4 18
SH_3
SH_4
28 CS_3P
29 CS_3N
30 CS_4P
CS_4P
31 CS_4N
CS_4N
J11
PCNT 32
PCN
3V
R24 R23 R22 R21
J16
19 TEMP_1
TEMP_1
20 TEMP_2
TEMP_2
21 TEMP_3
TEMP_3
J1
24V
4 VIN
C1
7 VIN
＋
24V
-
C5
22 TEMP_4
TEMP_4
+
3V
VO 48
C2
C3
C4
BIAS 3
BIAS2 2
BIAS3 46
SP 45
C17
1 DGND
TEST 33
C8
C7
C6
16 AGND
23 AGND
36 AGND
47 AGND
20
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
M A N U A L
Figure 6-2 Evaluation Board Circuit Schematic
CH_1
Q1
24V
J12
L1
+
R5
DRV_1
D1
-
C13
CH_1
Q5
C9
R9
SH_1
CS_1P
R13
CS_1N
R17
CH_2
Q2
24V
J13
L2
+
R6
DRV_2
D2
-
C14
CH_2
Q6
C10
R10
SH_2
CS_2P
R14
CS_2N
R18
CH_3
Q3
24V
J14
L3
+
R7
DRV_3
D3
-
C15
CH_3
Q7
C11
R11
SH_3
CS_3P
R15
CS_3N
R19
CH_4
Q4
24V
J15
L4
+
R8
DRV_4
D4
C12
SH_4
-
C16
CH_4
Q9
R12
CS_4P
R16
R20
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
CS_4N
21
V1.1
O P E R A T I O N
7.
M A N U A L
Component List
Table 7-1 Evaluation Board Component List
Amount
Component
1
C1
5
100 μF, 50V
Ceramic capacitor,
C16
10 μF, 50V
C3, C6
2
C4, C17
Inductance,
220 μH, 2.1A
Resistor,
1 MΩ, 5%
4
R17, R18, R19, R20
4
R21, R22, R23, R24
4
D1, D2, D3, D4
4
Q1, Q2, Q3, Q4
4
Q5, Q6, Q7, Q8
-
-
-
1210
-
-
-
0603
-
-
-
0603
-
-
-
1206
-
-
-
12 mm×12 mm
MSS1210-224KED
Coilcraft
-
0603
-
-
-
0603
-
-
-
1812
-
-
-
0603
-
-
-
0603
-
-
-
SMC
SK33-7-F
DIODES
-
SuperSOT-6
FDC658AP
FAIRCHILD
-
SuperSOT-6
FDC8886
FAIRCHILD
-
-
-
-
-
Resistor,
R10, R11, R12
R13, R14, R15, R16
ϕ8 mm×12 mm
100 kΩ, 5%
R5, R6, R7, R8, R9,
4
Remarks
100 pF, 50V
4.7μF, 50V
R1, R2, R3, R4
Vendor
Ceramic capacitor,
Ceramic capacitor,
4
Parts Number
0.1 μF, 50V
C10, C11, C12
L1, L2, L3, L4
Package
Ceramic capacitor,
C5, C7, C8, C9,
4
8
Electrolytic capacitor,
C2, C13, C14, C15,
2
7
Description
Resistor,
0.2Ω, 1%
Resistor,
0Ω
Resistor,
7.5 kΩ, 5%
Super-fast recovery diode,
30V, 3A
Single P-Channel MOSFET,
30V, 4A
Single N-Channel MOSFET,
30V, 6.5A
J1, J12, J13, J14,
Connection terminals
J15
(5.08 mm), 2P
5
J7, J8, J9, J10, J17
3 PIN header, (2.54 mm)
-
-
-
-
1
J6
8 PIN header, (2.54 mm)
-
-
-
-
1
J11
1 PIN header, (2.54 mm)
-
-
-
-
1
J16
4 PIN header, (2.54 mm)
-
-
-
NMT
1
J17
4 PIN header, (2.54 mm)
-
-
-
-
1
U1
LED driver IC
LQFP48
S6AL211A94
Cypress
-
5
Coilcraft
:
DIODES
:
Coilcraft Inc.
Diodes Incorporated
FAIRCHILD
:
Fairchild Semiconductor International, Inc.
Cypress
:
Cypress Semiconductor Corp
NMT: No mount.
These components are compliant with RoHS, and please ask each vendor for details if necessary.
22
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
8.
M A N U A L
Board Picture
Figure 8-1 Evaluation Board Picture
(Top View)
(Bottom View)
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
23
V1.1
O P E R A T I O N
9.
M A N U A L
Ordering Information
Table 9-1 Ordering Information
Part Number
EVB Revision
Note
S6SAL211A94SA2001
S6SAL211A94-EVB-CN01 Rev1.1
-
10. Major Changes
Table 10-1 Major Changes
Page
Section
Change Results
Revision 1.0
-
24
CONFIDENTIAL
-
Initial release
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1
O P E R A T I O N
M A N U A L
SS901-00042-1v0-E
Cypress  Support Tool Manual
S6SAL211A94SA2001
Intelligent LED Lighting Starter Kit for BLE Communication
4ch 72W LED Driver Board
Operation Manual
July 2015 Rev. 1.0
Published:
Edited:
Cypress Semiconductor Corp.
Communications
July 17, 2015, S6SAL211A94SA2001_SS901-00042-1v0-E
CONFIDENTIAL
25
V1.1
O P E R A T I O N
M A N U A L
Colophon
The products described in this document are designed, developed and manufactured as contemplated for general use,
including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not
designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless
extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury,
severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control,
mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where
chance of failure is intolerable (i.e., submersible repeater and artificial satellite). Please note that Cypress will not be liable to
you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any
semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention
of over-current levels and other abnormal operating conditions. If any products described in this document represent goods
or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Law of Japan, the
US Export Administration Regulations or the applicable laws of any other country, the prior authorization by the respective
government entity will be required for export of those products.
Trademarks and Notice
The contents of this document are subject to change without notice. This document may contain information on a Cypress
product under development by Cypress. Cypress reserves the right to change or discontinue work on any product without
notice. The information in this document is provided as is without warranty or guarantee of any kind as to its accuracy,
completeness, operability, fitness for particular purpose, merchantability, non-infringement of third-party rights, or any other
warranty, express, implied, or statutory. Cypress assumes no liability for any damages of any kind arising out of the use of
the information in this document.
®
Copyright © 2015 Cypress Semiconductor Corp. All rights reserved. Cypress, the Cypress logo, Spansion , the Spansion
®
®
TM
TM
TM
TM
logo, MirrorBit , MirrorBit Eclipse , ORNAND , Easy DesignSim , Traveo and combinations thereof, are trademarks
and registered trademarks of Cypress Semiconductor Corp. in the United States and other countries. Bluetooth is a
trademark of Bluetooth SIG. Other names used are for informational purposes only and may be trademarks of their
respective owners.
26
CONFIDENTIAL
S6SAL211A94SA2001_SS901-00042-1v0-E, July 17, 2015
v1.1