DS07-16706-4E

The following document contains information on Cypress products.
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-16706-4E
32-bit Microcontrollers
CMOS
FR60 MB91313A Series
MB91F313A
■ DESCRIPTION
The FR family* is a line of microcontrollers based on a high-performance 32-bit RISC CPU that contains a
variety of built-in I/O resources for embedded control applications which require high-performance, highspeed CPU processing.
MB91313A series has multiple communication macro channels, suitable for embedded control applications
such as TV control.
* : FR, the abbreviation of FUJITSU RISC controller, is a line of products of Fujitsu Semiconductor Limited.
■ FEATURES
1. FR CPU
• 32-bit RISC load/store architecture with a five-stage pipeline
• Operating frequency 33 MHz (oscillator frequency: 16.5 MHz; oscillator frequency multiplier: 2 (PLL clock
multiplication method))
• 16-bit fixed length instructions (basic instructions)
• Instruction execution speed : 1 instruction per cycle
• Instructions including memory-to-memory transfer, bit manipulation, and barrel shift instructions :
Instructions suitable for embedded applications
• Function entry/exit instructions and register data multi-load store instructions :
Instructions supporting C language
• Register interlock functions : Facilitates assembly-language coding
(Continued)
For the information for microcontroller supports, see the following web site.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2007-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2011.3
MB91313A Series
• On-chip multiplier supported at the instruction level
- Signed 32-bit multiplication : 5 cycles
- Signed 16-bit multiplication : 3 cycles
• Interrupt (PC, PS save) : 6 cycles, 16 priority levels
• Harvard architecture enabling program access and data access to be executed simultaneously
• Instruction prefetch feature implemented using a 4-word queue in the CPU
• Instruction compatible with the FR family
2. Simple External Bus Interface
•
•
•
•
Function as an 8-bit or 16-bit multiplexed bus through programmatic settings
Operating frequency : Max 16.5 MHz
Multiplexed I/O for 8/16-bit data/address
Capable of chip-select signal output for 4 completely independent areas configurable in minimum units of
64 Kbytes
• Basic bus cycle : 3 cycles
• Automatic wait cycle generation function to be programmed for each area
• Unused data/address/control signal pins can serve as general-purpose I/O
3. Built-in Memory
Flash : 544 Kbytes, RAM : 32 Kbytes
4. DMAC (DMA Controller)
•
•
•
•
•
5 channels
Two transfer sources : Internal peripheral/software
Addressing modes : 20/24-bit address selectable (increment/decrement/fixed)
Transfer modes : Burst transfer/step transfer/block transfer
Transfer data size : Selectable from 8, 16, or 32 bits
5. Bit Search Module (for REALOS)
Function to search from the MSB (most significant bit) for the position of the first “0”, “1”, or changed bit
in a word
6. 16-bit Reload Timer (Including 1 Channel for REALOS)
• 6 channels
• Internal clock: Frequency division selectable from 2, 8, and 32
(Continued)
2
DS07-16706-4E
MB91313A Series
7. Multifunction Serial Interface
• 11 channels
• Full duplex double buffer
• Communication mode : Asynchronous (start-stop synchronization) communication, clock synchronous
communication (8.25 Mbps Max), I2C standard mode (100 kbps Max), high-speed mode (400 kbps Max)
• Parity on/off selectable
• Baud rate generators for each channel
• Extensive error detection functions : Parity, frame, and overrun
• External clock can be used as transfer clock
• Ch.0 to ch.2 : DMA transfers/each equipped with a pair of 16-byte transmit and receive FIFOs
• Ch.8 to ch.10 : 5 V tolerant
• Ch.8 : Open drain outputs
• I2C bridge function (bridges between channels 0, 1, and 2)
• SPI mode
8. Interrupt Controller
•
•
•
•
External interrupt lines: Total of 24 lines (INT23 to INT0)
Interrupts from internal peripherals
Programmable 16 priority levels
Capable of using wakeup from STOP mode
9. 10-bit A/D Converter
•
•
•
•
10 channels
Successive approximation type : Conversion time : About 7.94 μs
Conversion mode : Single-shot conversion mode, scan conversion mode
Activation sources : Software/external trigger
10. PPG
•
•
•
•
•
•
4 channels
16-bit down counter, 16-bit data register with cycle setting buffer
Internal clock : Frequency division selected from 1, 4, 16, and 64
Support for automatic cycle setting by DMA transfer
Function for supporting remote control transmission
Open drain outputs
11. PWC
• 1 channel (1 input)
• 16-bit up counter
• Simple digital lowpass filter
12. Multifunction Timer
•
•
•
•
•
•
4 channels
Lowpass filter eliminating noise below a pre-set clock frequency
Capable of pulse width measurement using seven types of clock signals
Pin input event count function
Interval timer function using seven types of clock signals and external input clock
Internal HSYNC counter mode
(Continued)
DS07-16706-4E
3
MB91313A Series
(Continued)
13. HDMI-CEC / Remote Control Receiver
• 2 channels
• HDMI-CEC receiver function (with automatic ACK response function)
• Remote control receiver function (built-in 4-byte receive buffer)
14. Other Interval Timers
• Watch timer (32 kHz, counts up to a maximum of 60 seconds)
• Watchdog timer
15. I/O Ports
Max 86 ports
16. Other Features
•
•
•
•
•
Internal oscillator circuit as a clock source
INITX provided as a reset pin
Watchdog timer reset and software reset are available
Stop and sleep modes supported as low-power consumption modes
Gear function
• Time-base timer
• 5 V tolerant I/O (some pins)
• Package LQFP-120, 0.50 mm pitch, 16.0 mm × 16.0 mm
• CMOS technology (0.18μm)
• Power supply voltage 3.3 V ± 0.3 V, 1.8 V ± 0.15 V dual power supply
4
DS07-16706-4E
VSS
PF0/RCIN0
PF1/RCIN1
PF2/RCACK0
PF3/RCACK1
PF4
PF5
PF6
PF7
VDDE
VSS
AVSS
AVRH
AVCC
PD0/AN0
PD1/AN1
PD2/AN2
PD3/AN3
PD4/AN4
PD5/AN5
PD6/AN6
PD7/AN7
PE0/AN8/INT0
PE1/AN9/PPG0/INT1
PE2/PPG1/INT2/ATRG
PE3/PPG2/INT3
VDDE
INITX
X0A
X1A
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
VDDE
P22/SCK0/SCL0 (I2C bridge)
P21/SOT0/SDA0 (I2C bridge)
P20/SIN0
P57/WR1X
P56/WR0X
P55/RDX
P54/ASX
P53/CS3X/PPG3
P52/CS2X/PPG2
P51/CS1X/PPG1
P50/CS0X/PPG0
P17/AD15
P16/AD14/SCK7/SCL7
P15/AD13/SOT7/SDA7
P14/AD12/SIN7
P13/AD11/SCK6/SCL6
P12/AD10/SOT6/SDA6
P11/AD09/SIN6
P10/AD08/SCK5/SCL5
P07/AD07/SOT5/SDA5/INT15
P06/AD06/SIN5/INT14
P05/AD05/SCK4/SCL4/INT13
P04/AD04/SOT4/SDA4/INT12
P03/AD03/SIN4/INT11
P02/AD02/SCK3/SCL3/INT10
P01/AD01/SOT3/SDA3/INT9
P00/AD00/SIN3/INT8
VDDI
VSS
MB91313A Series
■ PIN ASSIGNMENT
(TOP VIEW)
VSS
VDDI
P23/SIN1
P24/SOT1/SDA1 (I2C bridge)
P25/SCK1/SCL1 (I2C bridge)
P26/SIN2
P27/SOT2/SDA2 (I2C bridge)
P30/SCK2/SCL2 (I2C bridge)
P31/TOT0
P32/TOT1
P33/TOT2
P34/TIN0
P35/TIN1
P36/TIN2
P37/RIN
P40/TMO0/INT16
P41/TMO1/INT17
P42/TMO2/INT18
P43/TMO3/INT19
P44/TMI0/INT20
P45/TMI1/INT21/SIN10
P46/TMI2/INT22/SOT10/SDA10
P47/TMI3/INT23/SCK10/SCL10
P60/TOT3/TRG2
P61/TOT4/TRG3
P62/TOT5/RDY
P63/TIN3/CLK
P64/TIN4
P65/TIN5
VDDE
DS07-16706-4E
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
LQFP-120
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
VDDE
IBREAK
ICLK
ICS2
ICS1
ICS0
ICD3
ICD2
ICD1
ICD0
TRSTX
PC7/TRG1
PC6/TRG0
PC5/PPGB
PC4/PPGA
PC3
PC2/SCK9/SCL9
PC1/SOT9/SDA9
PC0/SIN9
PE7/SCK8/SCL8/INT7
PE6/SOT8/SDA8/INT6
PE5/SIN8/INT5
PE4/PPG3/INT4
MD2
MD1
MD0
VDDI
X0
X1
VSS
(FPT-120P-M21)
5
MB91313A Series
■ PIN DESCRIPTION
Pin no.
Pin name
I/O circuit
type*1
1
VSS
⎯
GND pin
2
VDDI
⎯
1.8 V power supply pin
3
4
5
6
7
8
9
10
11
12
13
14
15
P23
SIN1
P24
2
SOT1/SDA1 (I C bridge)
P25
SCK1/SCL1 (I2C bridge)
P26
SIN2
P27
SOT2/SDA2 (I2C bridge)
P30
2
SCK2/SCL2 (I C bridge)
P31
TOT0
P32
TOT1
P33
TOT2
P34
TIN0
P35
TIN1
P36
TIN2
P37
RIN
D
L
L
D
L
L
D
D
D
D
D
D
D
P40
16
TMO0
INT16
Description
General-purpose port
Serial data input pin
General-purpose port
Serial data output pin/I2C data I/O pin
General-purpose port
Serial communication clock I/O pin/I2C clock I/O pin
General-purpose port
Serial data input pin
General-purpose port
Serial data output pin/I2C data I/O pin
General-purpose port
Serial communication clock I/O pin/I2C clock I/O pin
General-purpose port
Reload timer output pin
General-purpose port
Reload timer output pin
General-purpose port
Reload timer output pin
General-purpose port
Event input pin for reload timer
General-purpose port
Event input pin for reload timer
General-purpose port
Event input pin for reload timer
General-purpose port
PWC input pin
General-purpose port
B
Multifunction timer output pin
External interrupt request input pin
(Continued)
6
DS07-16706-4E
MB91313A Series
Pin no.
Pin name
I/O circuit
type*1
P41
17
TMO1
General-purpose port
B
INT17
TMO2
General-purpose port
B
INT18
TMO3
General-purpose port
B
INT19
TMI0
General-purpose port
B
INT20
TMI1
INT21
General-purpose port
B
SIN10
TMI2
INT22
B
INT23
B
25
26
Multifunction timer input pin
External interrupt request input pin
Serial communication clock I/O pin/I2C clock I/O pin
P60
TOT3
External interrupt request input pin
General-purpose port
SCK10/SCL10
24
Multifunction timer input pin
Serial data output pin/I2C data I/O pin
P47
TMI3
External interrupt request input pin
General-purpose port
SOT10/SDA10
23
Multifunction timer input pin
Serial data input pin
P46
22
Multifunction timer input pin
External interrupt request input pin
P45
21
Multifunction timer output pin
External interrupt request input pin
P44
20
Multifunction timer output pin
External interrupt request input pin
P43
19
Multifunction timer output pin
External interrupt request input pin
P42
18
Description
General-purpose port
C
Reload timer output pin
TRG2
PPG trigger input pin
P61
General-purpose port
TOT4
C
Reload timer output pin
TRG3
PPG trigger input pin
P62
General-purpose port
TOT5
RDY
C
Reload timer output pin
External ready input pin
(Continued)
DS07-16706-4E
7
MB91313A Series
Pin no.
Pin name
I/O circuit
type*1
P63
27
TIN3
General-purpose port
C
CLK
28
29
P64
TIN4
P65
TIN5
Description
Event input pin for reload timer
External clock output pin
C
C
General-purpose port
Event input pin for reload timer
General-purpose port
Event input pin for reload timer
30
VDDE
⎯
3.3 V power supply pin
31
VSS
⎯
GND pin
32
33
34
35
PF0
RCIN0
PF1
RCIN1
PF2
RCACK0
PF3
RCACK1
B
B
D
D
General-purpose port
HDMI-CEC / Remote control 0 I/O pin
General-purpose port
HDMI-CEC / Remote control 1 I/O pin
General-purpose port
HDMI-CEC / Remote control 0 ACK output pin
General-purpose port
HDMI-CEC / Remote control 1 ACK output pin
36
PF4
D
General-purpose port
37
PF5
D
General-purpose port
38
PF6
D
General-purpose port
39
PF7
D
General-purpose port
40
VDDE
⎯
3.3 V power supply pin
41
VSS
⎯
GND pin
42
AVSS
⎯
A/D converter GND pin
43
AVRH
⎯
A/D converter reference voltage pin
44
AVCC
⎯
A/D converter power supply pin
45
46
47
48
49
PD0
AN0
PD1
AN1
PD2
AN2
PD3
AN3
PD4
AN4
L
L
L
L
L
General-purpose port
A/D converter analog input pin
General-purpose port
A/D converter analog input pin
General-purpose port
A/D converter analog input pin
General-purpose port
A/D converter analog input pin
General-purpose port
A/D converter analog input pin
(Continued)
8
DS07-16706-4E
MB91313A Series
Pin no.
Pin name
50
51
52
PD5
I/O circuit
type*1
L
AN5
PD6
L
AN6
PD7
L
AN7
PE0
53
54
AN8
L
A/D converter analog input pin
General-purpose port
A/D converter analog input pin
General-purpose port
A/D converter analog input pin
A/D converter analog input pin
INT0
External interrupt request input pin
PE1
General-purpose port
AN9
PPG0*2
L
PPG1*
PPG output pin
General-purpose port
2
B
INT2
ATRG
PPG output pin
External interrupt request input pin
A/D converter trigger input pin
PE3
PPG2*
A/D converter analog input pin
External interrupt request input pin
PE2
56
General-purpose port
General-purpose port
INT1
55
Description
General-purpose port
2
B
INT3
PPG output pin
External interrupt request input pin
57
VDDE
⎯
3.3 V power supply
58
INITX
G
Initial reset pin
59
X0A
A
Sub clock input pin
60
X1A
A
Sub clock output pin
61
VSS
⎯
GND pin
62
X1
A
Main clock output pin
63
X0
A
Main clock input pin
64
VDDI
⎯
1.8 V power supply pin
65
MD0
F
Mode pin
66
MD1
F
Mode pin
67
MD2
F
Mode pin
PE4
68
PPG3*
INT4
General-purpose port
2
B
PPG output pin
External interrupt request input pin
(Continued)
DS07-16706-4E
9
MB91313A Series
Pin no.
Pin name
I/O circuit
type*1
PE5
69
70
71
SIN8
General-purpose port
B
73
74
75
76
77
78
79
Serial data input pin
INT5
External interrupt request input pin
PE6
General-purpose port
SOT8/SDA8
B
Serial data output pin/I2C data I/O pin
INT6
External interrupt request input pin
PE7
General-purpose port
SCK8/SCL8
B
INT7
72
Description
PC0
SIN9
PC1
SOT9/SDA9
PC2
SCK9/SCL9
PC3
PC4
PPGA
PC5
PPGB
PC6
TRG0
PC7
TRG1
Serial communication clock I/O pin/I2C clock I/O pin
External interrupt request input pin
B
B
B
B
B
B
B
B
General-purpose port
Serial data input pin
General-purpose port
Serial data output pin/I2C data I/O pin
General-purpose port
Serial communication clock I/O pin/I2C clock I/O pin
General-purpose port
General-purpose port
PPG output pin
General-purpose port
PPG output pin
General-purpose port
PPG trigger input pin
General-purpose port
PPG trigger input pin
80
TRSTX
G
Development tool reset pin
81
ICD0
K
Development tool data pin
82
ICD1
K
Development tool data pin
83
ICD2
K
Development tool data pin
84
ICD3
K
Development tool data pin
85
ICS0
H
Development tool status pin
86
ICS1
H
Development tool status pin
87
ICS2
H
Development tool status pin
88
ICLK
H
Development tool clock pin
89
IBREAK
I
Development tool break pin
90
VDDE
⎯
3.3 V power supply pin
(Continued)
10
DS07-16706-4E
MB91313A Series
Pin no.
Pin name
I/O circuit
type*1
91
VSS
⎯
GND pin
92
VDDI
⎯
1.8 V power supply pin
P00
AD00
93
94
95
SIN3
General-purpose port
O
P01
General-purpose port
SOT3/SDA3
O
P02
General-purpose port
SCK3/SCL3
O
AD03
SIN4
SOT4/SDA4
O
O
O
INT15
Serial communication clock I/O pin/I2C clock I/O pin
General-purpose port
O
External address/data bus I/O pin
Serial data input pin
External interrupt request input pin
P07
SOT5/SDA5
External address/data bus I/O pin
External interrupt request input pin
INT14
AD07
Serial data output pin/I2C data I/O pin
General-purpose port
P06
SIN5
External address/data bus I/O pin
External interrupt request input pin
INT13
AD06
Serial data input pin
General-purpose port
P05
SCK4/SCL4
External address/data bus I/O pin
External interrupt request input pin
INT12
AD05
Serial communication clock I/O pin/I2C clock I/O pin
General-purpose port
P04
AD04
External address/data bus I/O pin
External interrupt request input pin
INT11
100
Serial data output pin/I2C data I/O pin
External interrupt request input pin
AD02
99
External address/data bus I/O pin
INT9
P03
98
Serial data input pin
External interrupt request input pin
INT10
97
External address/data bus I/O pin
INT8
AD01
96
Description
General-purpose port
O
External address/data bus I/O pin
Serial data output pin/I2C data I/O pin
External interrupt request input pin
(Continued)
DS07-16706-4E
11
MB91313A Series
Pin no.
Pin name
I/O circuit
type*1
P10
101
General-purpose port
AD08
O
P11
103
General-purpose port
AD09
O
Serial data input pin
P12
General-purpose port
AD10
O
General-purpose port
AD11
O
P14
General-purpose port
AD12
O
Serial data input pin
P15
General-purpose port
AD13
O
General-purpose port
AD14
O
P17
O
AD15
P50
CS0X
C
P51
CS1X
C
P52
General-purpose port
CS2X
C
2
P53
General-purpose port
CS3X
C
2
External chip select pin
PPG output pin
PPG3*
ASX
External chip select pin
PPG output pin
PPG2*
P54
External chip select pin
PPG output pin
PPG1*
113
External chip select pin
General-purpose port
2
112
External address/data bus I/O pin
PPG output pin
PPG0*
111
General-purpose port
General-purpose port
2
110
External address/data bus I/O pin
Serial communication clock I/O pin/I2C clock I/O pin
SCK7/SCL7
109
External address/data bus I/O pin
Serial data output pin/I2C data I/O pin
P16
108
External address/data bus I/O pin
SIN7
SOT7/SDA7
107
External address/data bus I/O pin
Serial communication clock I/O pin/I2C clock I/O pin
SCK6/SCL6
106
External address/data bus I/O pin
Serial data output pin/I2C data I/O pin
P13
105
External address/data bus I/O pin
SIN6
SOT6/SDA6
104
External address/data bus I/O pin
Serial communication clock I/O pin/I2C clock I/O pin
SCK5/SCL5
102
Description
C
General-purpose port
External address strobe output pin
(Continued)
12
DS07-16706-4E
MB91313A Series
(Continued)
Pin no.
Pin name
P55
114
RDX
P56
115
WR0X
P57
116
WR1X
P20
117
SIN0
I/O circuit
type*1
C
C
C
D
P21
118
SOT0/SDA0
(I2C bridge)
Description
General-purpose port
External read strobe output pin
General-purpose port
External data bus write strobe output pin
General-purpose port
External data bus write strobe output pin
General-purpose port
Serial data input pin
General-purpose port
L
P22
Serial data output pin/I2C data I/O pin
General-purpose port
119
SCK0/SCL0
(I2C bridge)
L
120
VDDE
⎯
Serial communication clock I/O pin/I2C clock I/O pin
3.3 V power supply pin
*1 : For the I/O circuit type, refer to “■ I/O CIRCUIT TYPE”.
*2 : For PPG0, PPG1, PPG2, PPG3 on pins 54, 55, 56, 68, and on pins 109, 110, 111, 112 respectively, select
and use each one of them via PFR. For the PFR, refer to "CHAPTER 4 I/O PORTS" in the hardware manual.
DS07-16706-4E
13
MB91313A Series
■ I/O CIRCUIT TYPE
Type
A
Circuit type
Remarks
X1, X1A
Clock input
Oscillator circuit
Internal feedback resistance X0 : 1 MΩ
X0A : No
X0, X0A
Standby control
B
P-ch
Digital output
• CMOS level output
• CMOS level hysteresis input
VIH = 0.7 × VDDE
• With standby control
• 5 V tolerant
Digital output
N-ch
Digital input
Standby control
C
Pull-up control
P-ch
P-ch
Digital output
• CMOS level output
• CMOS level hysteresis input
VIH = 0.8 × VDDE
• With standby control
• With pull-up control
• With pull-up resistance (33 kΩ)
Digital output
N-ch
Digital input
Standby control
(Continued)
14
DS07-16706-4E
MB91313A Series
Type
Circuit type
Remarks
D
P-ch
Digital output
• CMOS level output
• CMOS level hysteresis input
VIH = 0.8 × VDDE
• With standby control
• Without pull-up resistance
Digital output
N-ch
Digital input
Standby control
F
• CMOS level input
• Without standby control
P-ch
N-ch
Digital input
G
P-ch
• CMOS hysteresis input
• With pull-up resistance
P-ch
N-ch
Digital input
H
CMOS level output
P-ch
Digital output
Digital output
N-ch
(Continued)
DS07-16706-4E
15
MB91313A Series
Type
Circuit type
Remarks
I
• CMOS hysteresis input
• With pull-down resistance
• Without standby control
P-ch
N-ch
N-ch
Digital input
K
P-ch
Digital output
•
•
•
•
CMOS level output
CMOS level input
Without standby control
With pull-down resistance
•
•
•
•
CMOS level output
CMOS level hysteresis input
With standby control
Analog input with switch
Digital output
N-ch
N-ch
Digital input
L
P-ch
Digital output
Digital output
N-ch
Analog input
Control
Digital input
Standby control
(Continued)
16
DS07-16706-4E
MB91313A Series
(Continued)
Type
Circuit type
O
Remarks
Pull-up control
P-ch
P-ch
Digital output
Digital output
N-ch
• CMOS level output
• CMOS input (external bus interface)
CMOS level hysteresis input
(port, resource)
VIH = 0.8 × VDDE
• With standby control
• With pull-up control
• With pull-up resistance (33 kΩ)
Port input
Resource input
External bus
input
Standby control
DS07-16706-4E
17
MB91313A Series
■ HANDLING DEVICES
• Preventing latch-up
Latch-up may occur in a CMOS IC if a voltage higher than VDDE or VDDI, or less than VSS is applied to an input
or output pin or if a voltage exceeding the rating is applied between VDDE and VSS, or VDDI and VSS. If
latch-up occurs, the power supply current increases rapidly, sometimes resulting in thermal breakdown of
the device. Therefore, be very careful not to apply voltages in excess of the absolute maximum ratings.
• Handling of unused input pins
If unused input pins are left open, abnormal operation may result. Any unused input pins should be connected
to pull-up or pull-down resistance.
• Power supply pins
In MB91313A series, devices including multiple of VDDE pins, VDDI pins and VSS pins are designed as follows;
pins necessary to be at the same potential are interconnected internally to prevent malfunctions such as latchup. All of the power supply pin and GND pin must be externally connected to the power supply and ground
respectively in order to reduce unnecessary radiation, to prevent strobe signal malfunctions due to the ground
level rising and to follow the total output current ratings. Furthermore, the VDDE pins, VDDI pins and VSS pins
of the MB91313A series must be connected to the current supply source via a low impedance. It is also
recommended to connect a ceramic capacitor of approximately 0.1 μF as a bypass capacitor between VDDE
pins, VDDI pins and VSS pins near this device.
• Crystal oscillator circuit
Noise in proximity to the X0 and X1 (X0A, X1A) pins can cause the device to operate abnormally. Printed
circuit boards should be designed so that the X0 (X0A) and X1 (X1A) pins, and crystal oscillator, as well as
bypass capacitors connected to ground, are located near the device and ground.
It is recommended that the printed circuit board artwork be designed such that the X0 and X1 pins or X0A
and X1A pins are surrounded by ground plane for the stable operation.
Please request the oscillator manufacturer to evaluate the oscillational characteristics of the crystal and this
device.
• Mode pins (MD0 to MD2)
When using mode pins, connect them directly to power supply pin or GND pin. To prevent the device from
entering test mode accidentally due to noise, minimize the lengths of the patterns between each mode pin
and power supply pin or GND pin on the printed circuit board as possible and connect them with low
impedance.
• Operation at power-on
Ensure that the INITX pin is reset and the settings are initialized (INIT) immediately after the power is turned
on.
Maintain the “L” level input to the INITX pin during the stabilization wait time immediately after the power on
to ensure the stabilization wait time as required by the oscillator circuit (the stabilization wait time is reset to
the minimum value when INIT is asserted using the INITX pin).
• Note on oscillator input at power-on
At power-on, ensure that the clock is input until the oscillator stabilization wait time has elapsed.
18
DS07-16706-4E
MB91313A Series
• Notes on the turning on/off VDDI pin (1.8 V internal power supply) and VDDE pin (3.3 V external pin power
supply)
Do not apply only VDDE pin (external power supply) voltage continuously (more than one minute) while the
VDDI pin (internal power supply) is disconnected as it will adversely affect the reliability of the LSI.
When the VDDE pin (external power supply) returns from the off state to the on state, the circuit may not be
able to maintain its internal state, for example, due to power supply noise.
Power on
VDD pin (internal power supply) → VDDE pin (external power supply) → Analog→ Signal
Power off
Signal → Analog→ VDDE pin (external power supply) → VDDI pin (internal power supply)
Turning on/off these power supplies (VDDI/Analog/VDDE) simultaneously causes no problem.
When the power is turned on, the states of the output pins may remain undefined until the internal power
supply becomes stable.
• Notes on using an external clock
When using the external clock as a general rule you should simultaneously supply X0 (X0A) and X1 (X1A)
pins. And also, the clock signal to X0 (X0A) should be supplied a clock signal with the reverse phase to X1
(X1A) pins. However, in this case the stop mode (oscillation stop mode) must not be used (This is because
the X1 (X1A) pin stops at “H” output in STOP mode). Furthermore, supply a clock to X0 (X0A) pin only if the
device is operating in less than 12.5 MHz.
Using an External Clock (Normal Method)
X0, X0A
X1, X1A
MB91313A series
Cannot be used in STOP mode (oscillation stop mode).
Using an External Clock (available at 12.5 MHz or less)
X0, X0A
Open
X1, X1A
MB91313A series
Note : When operating at a frequency of 10 MHz, the delay between the X0 (X0A) and X1 signals should be
less than 15 ns.
DS07-16706-4E
19
MB91313A Series
• AVCC pin
The MB91313A series has a built-in A/D converter. A capacitor of approximately 0.1μF must be connected
between the AVCC pin and AVSS pin.
AVCC
0.1μF
MB91313A series
AVSS
• Notes when not using the emulator
To operate the evaluation MCU on the user system without connecting the emulator, treat each input pin on
the evaluation MCU connected to the emulator interface on the user system as shown below.
Note that switching circuits or other measures may be needed on the user system.
Emulator Interface Pin Treatment
Evaluation MCU Pin Name
Pin Connection
TRSTX
Connect to the reset output circuit on the user system.
INITX
Connect to the reset output circuit on the user system.
Other Pins
Open
• Notes on selecting PLL clocks
If the crystal oscillator is disconnected or the clock input stops while the PLL clock is selected, the
microcontroller may continue to operate at the free-running frequency of the self-oscillating circuit within the
PLL. However, this operation is not guaranteed.
20
DS07-16706-4E
MB91313A Series
■ RESTRICTIONS
1) Clock control block
When an “L” level is input to the INITX pin, ensure that it is maintained for the duration of the oscillation
stabilization wait time.
2) Bit Search Module
The bit search data register for 0-detection (BSD0), bit search data register for 1-detection (BSD1), and bit
search data register for change point detection (BSDC) can be accessed in word.
3) I/O Ports
Ports can only be accessed in byte.
4) Low Power Consumption Mode
• To place the device in standby mode, use the synchronous standby mode (set with bit 8 (SYNCS bit) of
the timebase counter control register, TBCR) and be sure to use the following sequence :
(LDI#value_of_standby, r0)
(LDI#_STCR, R12)
STB
R0, @R12
LDUB @R12, R0
LDUB @R12, R0
NOP
NOP
NOP
NOP
NOP
; value_of_standby is the data to write to STCR
; _STCR is the address of STCR (481H)
; Write to the standby control register (STCR)
; Read STCR for synchronous standby
; Perform an additional dummy read of STCR
; 5 × NOP for timing adjustment
• Do not perform any of the following actions when using the monitor debugger.
• Set a breakpoint within the sequence of instructions shown above
• Perform step execution of the sequence of instructions shown above
DS07-16706-4E
21
MB91313A Series
5) Notes on the PS register
Some instructions write to the PS register in advance before executing. When a debugger is being used,
execution may break within an interrupt handler routine, or the values of the flags within the PS register may
be updated due to exception processing. However, the microcontroller is designed to reprocess correctly
after returning from the EIT, and to execute before and after the EIT proceeds according to the specifications.
• In any following situation, the previous instructions before a DIV0U or DIV0S instruction may take the
processing in (1) to (3).
- A user interrupt or NMI is accepted
- Step execution is performed
- A break occurs due to a data event or by being selected from the emulator menu
(1) The D0 and D1 flags are updated in advance.
(2) The EIT handling routine (user interrupt/NMI or emulator) is executed.
(3) Upon returning from the EIT, the DIV0U or DIV0S instruction is executed and the D0/D1 flags are
updated back to the same value as in step (1).
• If any of the OR CCR, ST ILM, or MOV Ri, PS instructions are executed to enable a user interrupt or NMI
interrupt source when that interrupt has occurred, the following operation will be performed.
(1) The PS register is updated in advance.
(2) The EIT handling routine (user interrupt/NMI or emulator) is executed.
(3) Upon returning from the EIT, the above instructions are executed and the PS registers are updated
back to the same value as in step (1).
6) Watchdog timer
The watchdog timer has a function to monitors the program to check that it delays a reset within a certain
period of time, and resets the CPU if the program runs out of control and fails to delay the reset. Once the
watchdog timer has been enabled, it keeps running until reset. As an exception, the reset is automatically
delayed in conditions where the execution of the CPU program stops. It is possible that the watchdog timer
will not be triggered if these conditions arise as a result of the system running out of control. In that case,
please reset (INIT) using the external INITX pin.
7) Notes on using the A/D converter
Do not supply a voltage higher than the VDDE pin to the AVCC pin.
8) Software reset in synchronous mode
When using the software reset in synchronous mode, the following two conditions should be satisfied before
setting the SRST bit in STCR (standby control register) to “0”.
• The interrupt enable flag (I-Flag) is set to interrupts disabled (I-Flag = 0) .
• The NMI is not being used.
22
DS07-16706-4E
MB91313A Series
■ BLOCK DIAGRAM
FR CPU CORE
32
Flash
544 Kbytes
32
Bit search
module
RAM
32 Kbytes
Bus converter
32 ↔ 16
adapter
DMAC
5 channels
Simple external bus I/F
8/16-bit
multiplexed bus
Clock
control
Interrupt
controller
External
interrupt
24 channels
Ports
DS07-16706-4E
Multifunction serial
interface
11 channels
PWC
1 channel
A/D converter
10 channels
PPG
4 channels
Reload
timer
6 channels
HDMI-CEC/
Remote control
receiver
2 channels
Multifunction
timer
4 channels
23
MB91313A Series
■ CPU AND CONTROL UNIT
Internal architecture
The FR family of CPUs is a line of high-performance cores providing advanced instructions for embedded
applications based on the RISC architecture.
1. Features
• RISC architecture Basic instructions : Execute at one instruction per cycle
• 32-bit architecture
General purpose registers : 32 bits × 16
• 4 Gbytes of linear memory space
• Built-in multiplier
32-bit × 32-bit multiplication : 5 cycles
16-bit × 16-bit multiplication : 3 cycles
• Enhanced interrupt servicing
High-speed response (6 cycles)
Multi-level interrupt support
Level mask feature (16 levels)
• Enhanced I/O manipulation instructions
Memory-to-memory transfer instructions
Bit manipulation instructions
• Basic instruction word length : 16 bits
• Lower-power consumption
Sleep mode/stop mode
Gear function
24
DS07-16706-4E
MB91313A Series
2. Internal architecture
The FR family of CPUs uses a Harvard architecture in which the instruction bus and data bus are separated.
A 32-bit ↔ 16-bit bus converter is connected to the 32-bit bus (F-bus) to provide an interface between the
CPU and peripheral resources.
A Harvard ↔ Princeton bus converter is connected to both of the I-bus and D-bus, providing an interface
between the CPU and the bus controller.
FR-CPU
I-bus
Built-in
RAM
Built-in
ROM
D-bus
32
32
32
32
Harvard ⇔ Princeton
bus converter
F-bus
32
32
X-bus
32
32
Real Bus
24
Address
32-bit 16-bit
bus converter
Bus controller
16
16
R-bus
Peripheral resource, port
DS07-16706-4E
25
MB91313A Series
3. Programming model
32 bits
[Initial Value]
R0
XXXX XXXXH
R1
...
...
...
General
purpose
registers
26
AC
...
R14
FP
XXXX XXXXH
R15
SP
0000 0000H
Program status
PS
ILM
SCR
CCR
TBR
RP
System stack pointer
SSP
User stack pointer
USP
Multiplication and division
register
...
R13
PC
Return pointer
...
...
R12
Program counter
Table base register
...
...
MDH
MDL
DS07-16706-4E
MB91313A Series
4. Register
• General-purpose registers
32 bits
[Initial Value]
R0
XXXX XXXXH
R1
...
...
...
...
...
...
...
...
R12
R13
AC
...
R14
FP
XXXX XXXXH
R15
SP
0000 0000H
Registers R0 to R15 are general-purpose registers. These registers are used as the accumulator and memory
access pointers in CPU operations.
Of these 16 registers, the registers listed below are intended for special applications, for which some instructions are enhanced.
• R13 : Virtual accumulator (AC)
• R14 : Frame pointer (FP)
• R15 : Stack pointer (SP)
The initial values of R0 to R14 after a reset are indeterminate. R15 is initialized to 00000000H (SSP value).
• PS (Program Status)
This register holds the program status and is divided into the ILM, SCR, and CCR.
All undefined bits are reserved bits. Reading these bits always returns “0”. Writing to them has no effect.
bit 31
bit 20
bit 16
ILM
DS07-16706-4E
bit 10 bit 8 bit 7
SCR
bit 0
CCR
27
MB91313A Series
• CCR (Condition Code Register)
bit 7
S
I
N
Z
V
C
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
S
I
N
Z
V
C
bit 10
bit 9
bit 8
D1
D0
T
[Initial Value]
--00XXXXB
: Stack flag
: Interrupt Enable flag
: Negative flag
: Zero flag
: Overflow flag
: Carrying flag
• SCR (System Condition Code Register)
[Initial Value]
XX0B
D1, D0 : Flag for step division
This flag stores interim data during execution of step multiplication.
T : Step trace trap flag
This flag indicates whether the step trace trap is enabled or disabled.
The step trace trap function is used by emulators. This function therefore cannot be used within a user
program when an emulator is being used.
• ILM (Interrupt Level Mask Register)
bit 20
bit 19
bit 18
bit 17
bit 16
[Initial Value]
ILM4
ILM3
ILM2
ILM1
ILM0
01111B
This register stores the value of the interrupt level mask, with the value stored in the ILM used as the interrupt
level mask.
The register is initialized to “01111B” on reset.
28
DS07-16706-4E
MB91313A Series
• PC (Program Counter)
bit 31
bit 0
[Initial Value]
XXXXXXXXH
The program counter indicates the address of the instruction that is being executed.
The initial value on reset is undefined.
• TBR (Table Base Register)
bit 31
bit 0
[Initial Value]
000FFC00H
The table base register stores the starting address of the vector table used for EIT processing.
The initial value on reset is 000FFC00H.
• RP (Return Pointer)
bit 31
bit 0
[Initial Value]
XXXXXXXXH
The return pointer stores the address to return from a subroutine.
When the CALL instruction is executed, the value of the PC is transferred to the RP register.
When the RET instruction is executed, the value of the RP is transferred to the PC register.
The initial value on reset is undefined.
• SSP (System Stack Pointer)
bit 31
bit 0
[Initial Value]
00000000H
The SSP is the system stack pointer.
The SSP functions as R15 when the S flag is “0”.
The SSP can be explicitly specified. The SSP is also used as the stack pointer that specifies the stack for
saving the PS and PC when an EIT event occurs.
The initial value after a reset is 00000000H.
DS07-16706-4E
29
MB91313A Series
• USP (User Stack Pointer)
bit 31
bit 0
[Initial Value]
XXXXXXXXH
The USP is the user stack pointer.
The USP functions as R15 when the S flag is “1”.
The USP can be explicitly specified.
The initial value after a reset is indeterminate.
This pointer cannot be used by the RETI instruction.
• MDH, MDL (Multiplication and Division Registers)
bit 31
bit 0
MDH
MDL
The multiplication and division registers are each 32 bits in length.
The default value at reset is undefined.
30
DS07-16706-4E
MB91313A Series
■ MEMORY SPACE
1. Memory space
The FR family has 4 Gbytes of logical address space (232 addresses) linearly accessible to the CPU.
Direct Addressing Areas
The following areas in the address space are used as I/O areas.
These areas are called direct addressing areas. The addresses of operands in these areas can be specified
directly within some instructions.
The direct addressing area varies depending on the size of data to be accessed as follows :
→ Byte data access
: 000H to 0FFH
→ Half word data access : 000H to 1FFH
→ Word data access
: 000H to 3FFH
2. Memory Map
Single chip mode
Internal ROM
external bus mode
I/O
I/O
I/O
I/O
Access
prohibited
Access
prohibited
Internal RAM
32 Kbytes
Internal RAM
32 Kbytes
00000000H
00000400H
00010000H
00038000H
00040000H
Access
prohibited
Direct addressing area
Refer to “ ■ I/O MAP”.
Access
prohibited
00050000H
00078000H
External area
Internal
Flash
544 Kbytes
00100000H
00200000H
007FFFFFH
FFFFFFFFH
DS07-16706-4E
Access
prohibited
Internal
Flash
544 Kbytes
Access
prohibited
External area
Access
prohibited
31
MB91313A Series
■ I/O MAP
The following table shows the correspondence between the memory space area and each of the peripheral
resource registers.
[How to read the table]
Address
000000H
Register
+0
+1
+2
+3
PDR0 [R/W]
XXXXXXXX
PDR1 [R/W]
XXXXXXXX
PDR2 [R/W]
XXXXXXXX
PDR3 [R/W]
XXXXXXXX
Block
T-unit
Port data
register
Read/Write attribute
Initial value after a reset
Register name (First-column register at address 4n; second-column register
at address 4n + 1)
Location of left-most register (When using word access, the register
in column 1 is in the MSB side of the data.
Note : The bit values in the register represent the following initial values :
• “1” : Initial value “1”
• “0” : Initial value “0”
• “X” : Initial value “Undefined”
• “-” : No physical register at this location
Access is prohibited for data access attributes that are not listed.
32
DS07-16706-4E
MB91313A Series
Register
Address
0
1
2
3
000000H
PDR0 [R/W]
XXXXXXXX
PDR1 [R/W]
XXXXXXXX
PDR2 [R/W]
XXXXXXXX
PDR3 [R/W]
XXXXXXXX
000004H
PDR4 [R/W]
XXXXXXXX
PDR5 [R/W]
XXXXXXXX
PDR6 [R/W]
--XXXXXX
Reserved
000008H
00000CH
Reserved
PDRC [R/W]
XXXXXXXX
PDRD [R/W]
XXXXXXXX
000010H
to
00001CH
000020H
PDRE [R/W]
XXXXXXXX
ADCTL[R/W]
00000000
Reserved
ADCH[R/W]
00000000 00000000
000024H
ADAT0[R]
XXXXXX00 00000000
ADAT1[R]
XXXXXX00 00000000
000028H
ADAT2[R]
XXXXXX00 00000000
ADAT3[R]
XXXXXX00 00000000
00002CH
ADAT4[R]
XXXXXX00 00000000
ADAT5[R]
XXXXXX00 00000000
000030H
ADAT6[R]
XXXXXX00 00000000
ADAT7[R]
XXXXXX00 00000000
000034H
ADAT8[R]
XXXXXX00 00000000
ADAT9[R]
XXXXXX00 00000000
000038H,
00003CH
Port data
register
PDRF [R/W]
XXXXXXXX
Reserved
ADCTH[R/W]
00000000
Block
Reserved
10-bit
A/D converter
Reserved
000040H
EIRR0 [R/W]
00000000
ENIR0 [R/W]
00000000
ELVR0 [R/W]
00000000 00000000
External
interrupt
0 to 7
000044H
DICR [R/W]
-------0
HRCL [R, R/W]
---11111
Reserved
Delayed/I-unit
TMRLR0 [W]
XXXXXXXX XXXXXXXX
TMR0 [R]
XXXXXXXX XXXXXXXX
00004CH
Reserved
TMCSR0 [R, R/W]
00000000 00000000
000050H
TMRLR1 [W]
XXXXXXXX XXXXXXXX
TMR1 [R]
XXXXXXXX XXXXXXXX
000054H
Reserved
TMCSR1 [R, R/W]
00000000 00000000
000058H
TMRLR2 [W]
XXXXXXXX XXXXXXXX
TMR2 [R]
XXXXXXXX XXXXXXXX
00005CH
Reserved
TMCSR2 [R, R/W]
00000000 00000000
000048H
Reload timer 0
Reload timer 1
Reload timer 2
(Continued)
DS07-16706-4E
33
MB91313A Series
Address
000060H
000064H
Register
0
1
2
3
SCR0 [R, R/W]
0--00000
SMR0 [W, R/W]
000-0000
SSR0 [R, R/W]
0-000011
ESCR0 [R/W]
--000000
BGR01 [R/W]
00000000
BGR00 [R/W]
00000000
FCR01 [R/W]
00-00100
FCR00 [R/W]
00000000
RDR0/TDR0 [R/W]
-------- 00000000 : RDR0
-------- 11111111 : TDR0
000068H
ISMK0 [R/W]
01111110
IBSA [R/W]
00000000
00006CH
FBYTE01 [R/W]
00000000
FBYTE00 [R/W]
00000000
000070H
SCR1 [R, R/W]
0--00000
SMR1 [W, R/W]
000-0000
000074H
RDR1/TDR1 [R/W]
-------- 00000000 : RDR1
-------- 11111111 : TDR1
000078H
ISMK1 [R/W]
01111110
IBSA1 [R/W]
00000000
00007CH
FBYTE11 [R/W]
00000000
FBYTE10 [R/W]
00000000
000080H
SCR2 [R, R/W]
0--00000
SMR2 [W, R/W]
000-0000
000084H
RDR2/TDR2 [R/W]
-------- 00000000 : RDR2
-------- 11111111 : TDR2
000088H
ISMK2 [R/W]
01111110
IBSA2 [R/W]
00000000
00008CH
FBYTE21 [R/W]
00000000
FBYTE20 [R/W]
00000000
000090H
SCR3 [R, R/W]
0--00000
SMR3 [W, R/W]
000-0000
000094H
000098H
RDR3/TDR3 [R/W]
-------- 00000000 : RDR3
-------- 11111111 : TDR3
ISMK3 [R/W]
01111110
0000A0H
0000A4H
0000A8H
0000ACH
Multifunction
serial interface
0
FIFO 0
Reserved
SSR1 [R, R/W]
0-000011
ESCR1 [R/W]
--000000
BGR11 [R/W]
00000000
BGR10 [R/W]
00000000
FCR11 [R/W]
00-00100
FCR10 [R/W]
00000000
Multifunction
serial interface
1
FIFO 1
Reserved
SSR2 [R, R/W]
0-000011
ESCR2 [R/W]
--000000
BGR21 [R/W]
00000000
BGR20 [R/W]
00000000
FCR21 [R/W]
00-00100
FCR20 [R/W]
00000000
Multifunction
serial interface
2
FIFO 2
Reserved
SSR3 [R, R/W]
0-000011
ESCR3 [R/W]
--000000
BGR31 [R/W]
00000000
BGR30 [R/W]
00000000
IBSA3 [R/W]
00000000
00009CH
Block
Multifunction
serial interface
3
Reserved
Reserved
SCR4 [R, R/W]
0--00000
SMR4 [W, R/W]
000-0000
RDR4/TDR4 [R/W]
-------- 00000000 : RDR4
-------- 11111111 : TDR4
ISMK4 [R/W]
01111110
SSR4 [R, R/W]
0-000011
ESCR4 [R/W]
--000000
BGR41 [R/W]
00000000
BGR40 [R/W]
00000000
IBSA4 [R/W]
00000000
Multifunction
serial interface
4
Reserved
Reserved
(Continued)
34
DS07-16706-4E
MB91313A Series
Register
Address
0000B0H
0
1
2
3
SCR5 [R, R/W]
0--00000
SMR5 [W, R/W]
000-0000
SSR5 [R, R/W]
0-000011
ESCR5 [R/W]
--000000
BGR51 [R/W]
00000000
BGR50 [R/W]
00000000
RDR5/TDR5 [R/W]
-------- 00000000 : RDR5
-------- 11111111 : TDR5
0000B4H
0000B8H
ISMK5 [R/W]
01111110
IBSA5 [R/W]
00000000
0000BCH
Block
Multifunction
serial interface
5
Reserved
Reserved
0000C0H
EIRR1 [R/W]
00000000
ENIR1 [R/W]
00000000
ELVR1 [R/W]
00000000 00000000
External interrupt
8 to 15
0000C4H
EIRR2 [R/W]
00000000
ENIR2 [R/W]
00000000
ELVR2 [R/W]
00000000 00000000
External interrupt
16 to 23
0000C8H,
0000CCH
0000D0H
Reserved
PWCCL[R/W]
0000--00
PWCCH[R/W]
00-00000
PWCUD[R/W]
XXXXXXXX XXXXXXXX
T0LPCR [R/W]
-----000
T0CCR [R/W]
0-000000
T0DRR [R/W]
XXXXXXXX XXXXXXXX
T1LPCR [R/W]
-----000
T1CCR [R/W]
0-000000
T1DRR [R/W]
XXXXXXXX XXXXXXXX
0000FCH
T2LPCR [R/W]
-----000
T2CCR [R/W]
0-000000
T2DRR [R/W]
XXXXXXXX XXXXXXXX
000104H
000108H
Reserved
Reserved
0000F4H
000100H
PWC
Reserved
0000E0H
to
0000ECH
0000F8H
Reserved
PWCC2[R/W]
000-----
0000DCH
0000F0H
Reserved
PWCD[R]
XXXXXXXX XXXXXXXX
0000D4H
0000D8H
Reserved
T3LPCR [R/W]
-----000
00010CH
T3CCR [R/W]
0-000000
T3DRR [R/W]
XXXXXXXX XXXXXXXX
Reserved
T0TCR [R/W]
00000000
T0R [R/W]
---00000
T0CRR [R/W]
XXXXXXXX XXXXXXXX
T1TCR [R/W]
00000000
T1R [R/W]
---00000
T1CRR [R/W]
XXXXXXXX XXXXXXXX
T2TCR [R/W]
00000000
T2R [R/W]
---00000
Multifunction
timer
T2CRR [R/W]
XXXXXXXX XXXXXXXX
T3TCR [R/W]
00000000
T3R [R/W]
---00000
T3CRR [R/W]
XXXXXXXX XXXXXXXX
(Continued)
DS07-16706-4E
35
MB91313A Series
Address
000110H
Register
0
1
2
TMODE [R/W]
00000000 00000000
000114H
to
00011CH
3
Reserved
Reserved
000120H
PDUT0[W]
XXXXXXXX XXXXXXXX
000124H
PTMR0[R]
11111111 11111111
000128H
PDUT1[W]
XXXXXXXX XXXXXXXX
00012CH
PTMR1[R]
11111111 11111111
000130H
PDUT2[W]
XXXXXXXX XXXXXXXX
000134H
PTMR2[R]
11111111 11111111
000138H
PDUT3[W]
XXXXXXXX XXXXXXXX
00013CH
PTMR3[R]
11111111 11111111
000140H,
000144H
PCSR0[W]
XXXXXXXX XXXXXXXX
PCNH0[R/W]
0000000-
PCNL0[R/W]
000000-0
PCSR1[W]
XXXXXXXX XXXXXXXX
PCNH1[R/W]
0000000-
PCNL1[R/W]
000000-0
PCSR2[W]
XXXXXXXX XXXXXXXX
PCNH2[R/W]
0000000-
PCNL2[R/W]
000000-0
PCSR3[W]
XXXXXXXX XXXXXXXX
PCNH3[R/W]
0000000-
PCNL3[R/W]
000000-0
Reserved
00014CH
Reserved
TMCSR3 [R, R/W]
00000000 00000000
000150H
TMRLR4 [W]
XXXXXXXX XXXXXXXX
TMR4 [R]
XXXXXXXX XXXXXXXX
000154H
Reserved
TMCSR4 [R, R/W]
00000000 00000000
000158H
TMRLR5 [W]
XXXXXXXX XXXXXXXX
TMR5 [R]
XXXXXXXX XXXXXXXX
Reserved
TMCSR5 [R, R/W]
00000000 00000000
000160H
to
00017CH
Reserved
PPG0
PPG1
PPG2
PPG3
Reserved
TMR3 [R]
XXXXXXXX XXXXXXXX
00015CH
Multifunction
timer
Reserved
TMRLR3 [W]
XXXXXXXX XXXXXXXX
000148H
Block
Reload timer 3
Reload timer 4
Reload timer 5
Reserved
(Continued)
36
DS07-16706-4E
MB91313A Series
Register
Address
0
1
2
3
000180H
RCCR0 [R/W]
0---0000
RCST0 [R/W]
00000000
RCSHW0 [R/W]
00000000
RCDAHW0 [R/W]
00000000
000184H
RCDBHW0 [R/W]
00000000
Reserved
RCADR01 [R/W]
00000000
RCADR02 [R/W]
00000000
000188H
RCDT0HH [R]
00000000
RCDT0HL [R]
00000000
RCDT0LH [R]
00000000
RCDT0LL [R]
00000000
RCCKD0 [R/W]
00000000 00000000
00018CH
RCCR1 [R/W]
0---0000
RCST1 [R/W]
00000000
RCSHW1 [R/W]
00000000
RCDAHW1 [R/W]
00000000
000194H
RCDBHW1 [R/W]
00000000
Reserved
RCADR11 [R/W]
00000000
RCADR12 [R/W]
00000000
000198H
RCDT1HH [R]
00000000
RCDT1HL [R]
00000000
RCDT1LH [R]
00000000
RCDT1LL [R]
00000000
RCCKD1 [R/W]
00000000 00000000
0001A0H
to
0001ACH
0001B0H
0001B8H
SMR6 [W, R/W]
000-0000
RDR6/TDR6 [R/W]
-------- 00000000 : RDR6
-------- 11111111 : TDR6
0001B4H
ISMK6 [R/W]
01111110
0001C0H
ESCR6 [R/W]
--000000
BGR61 [R/W]
00000000
BGR60 [R/W]
00000000
Multifunction
serial interface
6
Reserved
Reserved
SCR7 [R, R/W]
0--00000
SMR7 [W, R/W]
000-0000
RDR7/TDR7 [R/W]
-------- 00000000 : RDR7
-------- 11111111 : TDR7
0001C4H
0001C8H
Reserved
SSR6 [R, R/W]
0-000011
IBSA6 [R/W]
00000000
0001BCH
HDMI-CEC /
Remote controller 1
Reserved
Reserved
SCR6 [R, R/W]
0--00000
HDMI-CEC /
Remote controller 0
Reserved
000190H
00019CH
Block
ISMK7 [R/W]
01111110
0001CCH
SSR7 [R, R/W]
0-000011
ESCR7 [R/W]
--000000
BGR71 [R/W]
00000000
BGR70 [R/W]
00000000
IBSA7 [R/W]
00000000
Multifunction
serial interface
7
Reserved
Reserved
(Continued)
DS07-16706-4E
37
MB91313A Series
Address
0001D0H
0001D4H
0001D8H
Register
0
1
2
3
SCR8 [R, R/W]
0--00000
SMR8 [W, R/W]
000-0000
SSR8 [R, R/W]
0-000011
ESCR8 [R/W]
--000000
BGR81 [R/W]
00000000
BGR80 [R/W]
00000000
RDR8/TDR8 [R/W]
-------- 00000000 : RDR8
-------- 11111111 : TDR8
ISMK8 [R/W]
01111110
IBSA8 [R/W]
00000000
0001DCH
0001E0H
0001E4H
0001E8H
0001F4H
0001F8H
Multifunction
serial interface
8
Reserved
Reserved
SCR9 [R, R/W]
0--00000
SMR9 [W, R/W]
000-0000
RDR9/TDR9 [R/W]
-------- 00000000 : RDR9
-------- 11111111 : TDR9
ISMK9 [R/W]
01111110
SSR9 [R, R/W]
0-000011
ESCR9 [R/W]
--000000
BGR91 [R/W]
00000000
BGR90 [R/W]
00000000
IBSA9 [R/W]
00000000
0001ECH
0001F0H
Block
Multifunction
serial interface
9
Reserved
Reserved
SCRA[R, R/W]
0--00000
SMRA [W, R/W]
000-0000
RDRA/TDRA [R/W]
-------- 00000000 : RDRA
-------- 11111111 : TDRA
ISMKA [R/W]
01111110
SSRA [R, R/W]
0-000011
ESCRA[R/W]
--000000
BGRA1 [R/W]
00000000
BGRA0 [R/W]
00000000
IBSAA [R/W]
00000000
Multifunction
serial interface
10
Reserved
0001FCH
Reserved
000200H
DMACA0 [R/W]
00000000 00000000 00000000 00000000
000204H
DMACB0 [R/W]
00000000 00000000 00000000 00000000
000208H
DMACA1 [R/W]
00000000 00000000 00000000 00000000
00020CH
DMACB1 [R/W]
00000000 00000000 00000000 00000000
000210H
DMACA2 [R/W]
00000000 00000000 00000000 00000000
000214H
DMACB2 [R/W]
00000000 00000000 00000000 00000000
000218H
DMACA3 [R/W]
00000000 00000000 00000000 00000000
00021CH
DMACB3 [R/W]
00000000 00000000 00000000 00000000
000220H
DMACA4 [R/W]
00000000 00000000 00000000 00000000
DMAC
(Continued)
38
DS07-16706-4E
MB91313A Series
Register
Address
0
1
2
3
000224H
DMACB4 [R/W]
00000000 00000000 00000000 00000000
000228H
to
00023CH
Reserved
000240H
DMACR [R/W]
0XX00000 XXXXXXXX XXXXXXXX XXXXXXXX
000244H
to
0003ECH
Reserved
0003F0H
BSD0 [W]
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0003F4H
BSD1 [R/W]
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0003F8H
BSDC [W]
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0003FCH
BSRR [R]
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DMAC
Reserved
Bit search module
000400H
DDR0 [R/W]
00000000
DDR1 [R/W]
00000000
DDR2 [R/W]
00000000
DDR3 [R/W]
00000000
000404H
DDR4 [R/W]
00000000
DDR5 [R/W]
00000000
DDR6 [R/W]
--000000
Reserved
000408H
00040CH
Data direction
register
Reserved
DDRC [R/W]
00000000
DDRD [R/W]
00000000
DDRE [R/W]
00000000
000410H
Reserved
000414H
to
00041CH
Reserved
DDRF [R/W]
00000000
Reserved
000420H
PFR0 [R/W]
00000000
PFR1 [R/W]
00000000
PFR2 [R/W]
00000000
PFR3 [R/W]
00000000
000424H
PFR4 [R/W]
00000000
PFR5 [R/W]
00000000
PFR6 [R/W]
--000000
Reserved
000428H
00042CH
Port function
register
Reserved
PFRC [R/W]
00000000
PFRD [R/W]
00000000
PFRE [R/W]
00000000
000430H
Reserved
000434H
to
00043CH
Reserved
Block
PFRF [R/W]
00000000
Reserved
(Continued)
DS07-16706-4E
39
MB91313A Series
Address
Register
0
1
2
3
000440H
ICR00 [R, R/W]
---11111
ICR01 [R, R/W]
---11111
ICR02 [R, R/W]
---11111
ICR03 [R, R/W]
---11111
000444H
ICR04 [R, R/W]
---11111
ICR05 [R, R/W]
---11111
ICR06 [R, R/W]
---11111
ICR07 [R, R/W]
---11111
000448H
ICR08 [R, R/W]
---11111
ICR09 [R, R/W]
---11111
ICR10 [R, R/W]
---11111
ICR11 [R, R/W]
---11111
00044CH
ICR12 [R, R/W]
---11111
ICR13 [R, R/W]
---11111
ICR14 [R, R/W]
---11111
ICR15 [R, R/W]
---11111
000450H
ICR16 [R, R/W]
---11111
ICR17 [R, R/W]
---11111
ICR18 [R, R/W]
---11111
ICR19 [R, R/W]
---11111
000454H
ICR20 [R, R/W]
---11111
ICR21 [R, R/W]
---11111
ICR22 [R, R/W]
---11111
ICR23 [R, R/W]
---11111
000458H
ICR24 [R, R/W]
---11111
ICR25 [R, R/W]
---11111
ICR26 [R, R/W]
---11111
ICR27 [R, R/W]
---11111
00045CH
ICR28 [R, R/W]
---11111
ICR29 [R, R/W]
---11111
ICR30 [R, R/W]
---11111
ICR31 [R, R/W]
---11111
000460H
ICR32 [R, R/W]
---11111
ICR33 [R, R/W]
---11111
ICR34 [R, R/W]
---11111
ICR35 [R, R/W]
---11111
000464H
ICR36 [R, R/W]
---11111
ICR37 [R, R/W]
---11111
ICR38 [R, R/W]
---11111
ICR39 [R, R/W]
---11111
000468H
ICR40 [R, R/W]
---11111
ICR41 [R, R/W]
---11111
ICR42 [R, R/W]
---11111
ICR43 [R, R/W]
---11111
00046CH
ICR44 [R, R/W]
---11111
ICR45 [R, R/W]
---11111
ICR46 [R, R/W]
---11111
ICR47 [R, R/W]
---11111
000470H
to
00047CH
Reserved
RSRR [R, R/W]
10000000
STCR [R/W]
00110011
TBCR [R/W]
00XXXX00
CTBR [W]
XXXXXXXX
000484H
CLKR [R/W]
00000000
WPR [W]
XXXXXXXX
DIVR0 [R/W]
00000011
DIVR1 [R/W]
00000000
OSCCR [R/W]
XXXXXXX0
Reserved
Reserved
00048CH
WPCR [R/W]
00000000
000490H
OSCR [R/W]
00000000
000494H
to
0004FCH
Reserved
OSCT [R/W]
XXXXXXXX
Reserved
Interrupt control
unit
Reserved
000480H
000488H
Block
Clock control
unit
Watch timer
Reserved
Stabilization
wait timer
Reserved
(Continued)
40
DS07-16706-4E
MB91313A Series
Register
Address
0
1
2
000500H
PCR0 [R/W]
00000000
PCR1 [R/W]
00000000
000504H
Reserved
PCR5 [R/W]
00000000
3
Reserved
PCR6 [R/W]
--000000
000508H
to
000510H
Reserved
000514H
to
00051CH
Reserved
Reserved
EPFR0 [R/W]
00000000
EPFR1 [R/W]
00000000
EPFR2 [R/W]
11111111
EPFR3 [R/W]
11111111
000524H
EPFR4 [R/W]
11111111
EPFR5 [R/W]
11111111
EPFR6 [R/W]
--001000
Reserved
00052CH
Reserved
EPFRC [R/W]
00000000
EPFRD [R/W]
00000000
EPFRE [R/W]
00000000
000530H
Reserved
000534H
to
00056CH
Reserved
000570H
ADER[R/W]
00000011 11111111
000578H
Reserved
Reserved
NSF[R/W]
-----000 00000000
00057CH
to
00063CH
Reserved
I2C
noise filter
Reserved
000640H
ASR0 [R/W]
00000000 00000000
ACR0 [R/W]
00110X00 00000000
000644H
ASR1 [R/W]
00000000 XXXXXXXX
ACR1 [R/W]
00XX0X00 00X0XXXX
000648H
ASR2 [R/W]
00000000 XXXXXXXX
ACR2 [R/W]
00XX0X00 00X0XXXX
00064CH
ASR3 [R/W]
00000000 XXXXXXXX
ACR3 [R/W]
00XX0X00 00X0XXXX
000660H
EXT/I2C/
A/D
Reserved
Reserved
000650H
to
00065CH
External port
function
register
EPFRF [R/W]
00000000
Reserved
000574H
Port pull-up
control register
Reserved
000520H
000528H
Block
External bus
interface
Reserved
AWR0 [R/W]
01110000 01011011
AWR1 [R/W]
0XXX0000 0X0X1XXX
(Continued)
DS07-16706-4E
41
MB91313A Series
Address
000664H
Register
0
2
AWR2 [R/W]
0XXX0000 0X0X1XXX
000668H
to
00067CH
000680H
1
Reserved
CSER[R/W]
00000001
External bus
interface
Reserved
Reserved
000688H
to
0007F8H
⎯
Reserved
Block
AWR3 [R/W]
0XXX0000 0X0X1XXX
000684H
0007FCH
3
MODR [W]
XXXXXXXX
Unused
Reserved
⎯
000800H
to
000AFCH
⎯
Unused
000B00H
to
000FFCH
Reserved
Reserved
001000H
DMASA0 [R/W]
00000000 00000000 00000000 00000000
001004H
DMADA0 [R/W]
00000000 00000000 00000000 00000000
001008H
DMASA1 [R/W]
00000000 00000000 00000000 00000000
00100CH
DMADA1 [R/W]
00000000 00000000 00000000 00000000
001010H
DMASA2 [R/W]
00000000 00000000 00000000 00000000
001014H
DMADA2 [R/W]
00000000 00000000 00000000 00000000
001018H
DMASA3 [R/W]
00000000 00000000 00000000 00000000
00101CH
DMADA3 [R/W]
00000000 00000000 00000000 00000000
001020H
DMASA4 [R/W]
00000000 00000000 00000000 00000000
001024H
DMADA4 [R/W]
00000000 00000000 00000000 00000000
001028H
to
006FFCH
Reserved
DMAC
Reserved
(Continued)
42
DS07-16706-4E
MB91313A Series
(Continued)
Register
Address
0
1
2
007000H
FLCR[R/W]
0000X000
Reserved
007004H
FLWC[R/W]
00011011
Reserved
DS07-16706-4E
3
Block
Flash I/F
43
MB91313A Series
■ VECTOR TABLE
Interrupt number
Decimal
Hexadecimal
Reset
0
00
⎯
3FCH
000FFFFCH
⎯
⎯
Mode vector
1
01
⎯
3F8H
000FFFF8H
⎯
⎯
System reserved
2
02
⎯
3F4H
000FFFF4H
⎯
⎯
System reserved
3
03
⎯
3F0H
000FFFF0H
⎯
⎯
System reserved
4
04
⎯
3ECH
000FFFECH
⎯
⎯
System reserved
5
05
⎯
3E8H
000FFFE8H
⎯
⎯
System reserved
6
06
⎯
3E4H
000FFFE4H
⎯
⎯
Coprocessor absent trap
7
07
⎯
3E0H
000FFFE0H
⎯
⎯
Coprocessor error trap
8
08
⎯
3DCH
000FFFDCH
⎯
⎯
INTE instruction
9
09
⎯
3D8H
000FFFD8H
⎯
⎯
System reserved
10
0A
⎯
3D4H
000FFFD4H
⎯
⎯
System reserved
11
0B
⎯
3D0H
000FFFD0H
⎯
⎯
Step trace trap
12
0C
⎯
3CCH
000FFFCCH
⎯
⎯
NMI request (tool)
13
0D
⎯
3C8H
000FFFC8H
⎯
⎯
Undefined instruction
exception
14
0E
⎯
3C4H
000FFFC4H
⎯
⎯
System reserved
15
0F
15 (FH) fixed
3C0H
000FFFC0H
⎯
⎯
External interrupt 0
16
10
ICR00
3BCH
000FFFBCH
⎯
⎯
External interrupt 1
17
11
ICR01
3B8H
000FFFB8H
⎯
⎯
External interrupt 2
18
12
ICR02
3B4H
000FFFB4H
⎯
⎯
External interrupt 3
19
13
ICR03
3B0H
000FFFB0H
⎯
⎯
External interrupt 4
20
14
ICR04
3ACH
000FFFACH
⎯
⎯
External interrupt 5
21
15
ICR05
3A8H
000FFFA8H
⎯
⎯
External interrupt 6
22
16
ICR06
3A4H
000FFFA4H
⎯
⎯
External interrupt 7
23
17
ICR07
3A0H
000FFFA0H
⎯
⎯
Reload timer 0
24
18
ICR08
39CH
000FFF9CH
⎯
⎯
Reload timer 1
25
19
ICR09
398H
000FFF98H
⎯
⎯
Reload timer 2
26
1A
ICR10
394H
000FFF94H
⎯
⎯
UART0 RX/I C status
27
1B
ICR11
390H
000FFF90H
STOP
UART0 TX
28
1C
ICR12
38CH
000FFF8CH
⎯
UART1 RX/I2C status
29
1D
ICR13
388H
000FFF88H
STOP
UART1 TX
30
1E
ICR14
384H
000FFF84H
⎯
UART2 RX/I C status
31
1F
ICR15
380H
000FFF80H
STOP
UART2 TX
32
20
ICR16
37CH
000FFF7CH
⎯
33
21
ICR17
378H
000FFF78H
2
2
2
UART3 RX/TX/I C status
Offset
TBR default
DMA
transfer
address
DMAC
STOP
source
Interrupt
level
Interrupt source
⎯
⎯
(Continued)
44
DS07-16706-4E
MB91313A Series
Interrupt number
Decimal
Hexadecimal
UART4 RX/TX/I C status
34
22
ICR18
374H
000FFF74H
⎯
⎯
UART5 RX/TX/I2C status
35
23
ICR19
370H
000FFF70H
⎯
⎯
UART6 RX/TX/I2C status
36
24
ICR20
36CH
000FFF6CH
⎯
⎯
UART7 RX/TX/I2C status
37
25
ICR21
368H
000FFF68H
⎯
⎯
UART8 RX/TX/I2C status
38
26
ICR22
364H
000FFF64H
⎯
⎯
39
27
ICR23
360H
000FFF60H
⎯
⎯
UART10 RX/TX/I C status
40
28
ICR24
35CH
000FFF5CH
⎯
⎯
A/D converter
41
29
ICR25
358H
000FFF58H
⎯
⎯
PPG0
42
2A
ICR26
354H
000FFF54H
PWC
43
2B
ICR27
350H
000FFF50H
⎯
⎯
HDMI-CEC/Remote
controller 0, 1
44
2C
ICR28
34CH
000FFF4CH
⎯
⎯
Watch timer
45
2D
ICR29
348H
000FFF48H
⎯
⎯
Main oscillation wait
46
2E
ICR30
344H
000FFF44H
⎯
⎯
Timebase timer
47
2F
ICR31
340H
000FFF40H
⎯
⎯
Reload timer 3
48
30
ICR32
33CH
000FFF3CH
⎯
⎯
Reload timer 4
49
31
ICR33
338H
000FFF38H
⎯
⎯
Reload timer 5
50
32
ICR34
334H
000FFF34H
⎯
⎯
PPG1
51
33
ICR35
330H
000FFF30H
⎯
PPG2
52
34
ICR36
32CH
000FFF2CH
⎯
PPG3
53
35
ICR37
328H
000FFF28H
⎯
DMAC0
54
36
ICR38
324H
000FFF24H
⎯
⎯
DMAC1
55
37
ICR39
320H
000FFF20H
⎯
⎯
DMAC2
56
38
ICR40
31CH
000FFF1CH
⎯
⎯
DMAC3
57
39
ICR41
318H
000FFF18H
⎯
⎯
DMAC4
58
3A
ICR42
314H
000FFF14H
⎯
⎯
External interrupt 8 to 15
59
3B
ICR43
310H
000FFF10H
⎯
⎯
External interrupt 16 to 23
60
3C
ICR44
30CH
000FFF0CH
⎯
⎯
Multifunction timer 0, 1
61
3D
ICR45
308H
000FFF08H
⎯
⎯
Multifunction timer 2, 3
62
3E
ICR46
304H
000FFF04H
⎯
⎯
Delay interrupt
63
3F
ICR47
300H
000FFF00H
⎯
⎯
System reserved
(Used by REALOS)
64
40
⎯
2FCH
000FFEFCH
⎯
⎯
System reserved
(Used by REALOS)
65
41
⎯
2F8H
000FFEF8H
⎯
⎯
System reserved
66
42
⎯
2F4H
000FFEF4H
⎯
⎯
2
2
UART9 RX/TX/I C status
Offset
TBR default
DMA
transfer
address
DMAC
STOP
source
Interrupt
level
Interrupt source
2
⎯
(Continued)
DS07-16706-4E
45
MB91313A Series
(Continued)
Interrupt number
Decimal
Hexadecimal
System reserved
67
43
⎯
2F0H
000FFEF0H
⎯
⎯
System reserved
68
44
⎯
2ECH
000FFEECH
⎯
⎯
System reserved
69
45
⎯
2E8H
000FFEE8H
⎯
⎯
System reserved
70
46
⎯
2E4H
000FFEE4H
⎯
⎯
System reserved
71
47
⎯
2E0H
000FFEE0H
⎯
⎯
System reserved
72
48
⎯
2DCH
000FFEDCH
⎯
⎯
System reserved
73
49
⎯
2D8H
000FFED8H
⎯
⎯
System reserved
74
4A
⎯
2D4H
000FFED4H
⎯
⎯
System reserved
75
4B
⎯
2D0H
000FFED0H
⎯
⎯
System reserved
76
4C
⎯
2CCH
000FFECCH
⎯
⎯
System reserved
77
4D
⎯
2C8H
000FFEC8H
⎯
⎯
System reserved
78
4E
⎯
2C4H
000FFEC4H
⎯
⎯
System reserved
79
4F
⎯
2C0H
000FFEC0H
⎯
⎯
Used by INT instruction
80
to
255
50
to
FF
⎯
2BCH
to
000H
000FFEBCH
to
000FFC00H
⎯
⎯
46
Offset
TBR default
DMA
transfer
address
DMAC
STOP
source
Interrupt
level
Interrupt source
DS07-16706-4E
MB91313A Series
■ ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
Parameter
Symbol
Power supply voltage*1
Analog power supply voltage*1
Input voltage*1
Rating
Unit
Max
VDDE (3.3 V)
Vss − 0.5
Vss + 4.0
V
VDDI (1.8 V)
Vss − 0.3
Vss + 2.5
V
AVCC
Vss − 0.5
Vss + 4.0
V
AVRH
Vss − 0.5
Vss + 4.0
V
Vss − 0.5
VDDE + 0.5
V
Vss − 0.5
Vss + 6.0
V
5 V tolerant
pin
Vss − 0.5
Vss + 3.63
V
5 V tolerant
pin*5
VI
Analog pin input voltage*1
VIA
Vss − 0.5
AVcc + 0.5
V
Output voltage*1
VO
Vss − 0.5
VDDE + 0.5
V
IOL
⎯
8
mA
IOLAV
⎯
4
mA
ΣIOL
⎯
60
mA
ΣIOLAV
⎯
30
mA
IOH
⎯
−8
mA
IOHAV
⎯
−4
mA
ΣIOH
⎯
− 60
mA
ΣIOHAV
⎯
− 30
mA
Power consumption
PD
⎯
300
mW
Storage temperature
Tstg
− 40
+ 125
°C
“L” level maximum output current*2
“L” level average output current*
3
“L” level total maximum output
current
“L” level total average output
current*4
“H” level maximum output current*2
“H” level average output current*
“H” level total maximum output
current
“H” level total average output
current*4
3
Remarks
Min
*1 : This parameter is based on VSS = AVSS = 0.0 V
*2 : The maximum output current is the peak value for a single pin.
*3 : The average output current is the average current for a single pin over a period of 100 ms.
*4 : The total average output current is the average current for all pins over a period of 100 ms.
*5 : At VDDE = VDDI = AVCC = AVRH = AVSS = VSS = 0.0 V
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
DS07-16706-4E
47
MB91313A Series
2. Recommended Operating Conditions
(VSS = AVSS = 0.0 V)
Parameter
Symbol
Value
Unit
Min
Max
Ta
− 40
+ 85
VDDE (3.3 V)
3.0
3.6
VDDI (1.8 V)
1.65
1.95
Analog power supply voltage
AVCC
3.0
VDDE
V
5 V tolerant pin input voltage
VI
⎯
VSS + 5.5
V
Operating temperature
Power supply voltage
°C
V
WARNING: The recommended operating conditions are required in order to ensure the normal operation of
the semiconductor device. All of the device's electrical characteristics are warranted when the
device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their representatives beforehand.
48
DS07-16706-4E
MB91313A Series
3. DC Characteristics
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin name
⎯
ICCT
⎯
⎯
ICC
Current
consumption
(upper : 1.8 V
lower : 3.3 V)
⎯
⎯
ICCS
⎯
⎯
ICCL
⎯
⎯
⎯
ICCH
⎯
⎯
“H” level input
voltage
VIH
P00 to P07, P10 to P17,
P20 to P27, P30 to P37,
P50 to P57, P60 to P65,
PD0 to PD7, PE0, PE1,
PF2 to PF7
Conditions
“L” level input
voltage
VIL
Unit
Min
Typ
Max
Clock mode
Ta = + 25 °C,
fclk = 32 kHz
⎯
200
400
⎯
100
300
During normal
operation
Ta = + 25 °C,
fcp = 33 MHz,
fcpp = 33 MHz
⎯
55
80
⎯
25
40
⎯
30
50
⎯
15
30
Sub RUN mode
Ta = + 25 °C,
fclk = 32 kHz
⎯
250
450
⎯
150
400
Main Stop mode
Ta = + 25 °C,
fclk = 0
⎯
150
300
⎯
40
80
Main Stop mode
Ta = + 70 °C,
fclk = 0
⎯
400
800
⎯
100
200
VDDE × 0.8
⎯
VDDE
V
VDDE × 0.7
⎯
VDDE
V
VSS
⎯
VDDE × 0.2
V
VSS
⎯
VDDE × 0.3
V
Main sleep mode
Ta = + 25 °C,
fcp = 33 MHz,
fcpp = 33 MHz
μA
mA
mA
μA
μA
μA
VDDE = 3.3 V
PE2 to PE7, PC0 to PC7,
P40 to P47, PF0, PF1
P00 to P07, P10 to P17,
P20 to P27, P30 to P37,
P50 to P57, P60 to P65,
PD0 to PD7, PE0, PE1,
PF2 to PF7
Value
VDDE = 3.3 V
PE2 to PE7, PC0 to PC7,
P40 to P47, PF0, PF1
“H” level output
voltage
VOH
All port pins
VDDE = 3.3 V,
IOH = − 4 mA
VDDE − 0.5
⎯
VDDE
V
“L” level output
voltage
VOL
All port pins
VDDE = 3.3 V,
IOL = 4 mA
VSS
⎯
0.4
V
(Continued)
DS07-16706-4E
49
MB91313A Series
(Continued)
Parameter
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = − 40 °C to + 85 °C)
Symbol
Pin name
Conditions
Typ
Max
−5
⎯
+5
μA
− 10
⎯
+ 10
μA
PF0, PF1, P44, P45
VDDE = VDDI =
AVCC = AVRH =
AVSS = VSS =
0.0 V
⎯
⎯
0.9
μA
RP
Pull-up :
P00 to P07, P10 to P17,
P50 to P57, P60 to P65,
INITX, TRSTX
Pull-down :
ICD0 to ICD3, IBREAK
Pull-up :
VIL = 0 V
Pull-down :
VIH = VDDE
10
33
80
kΩ
RBS
Between P21 and P24
Between P22 and P25
Between P24 and P27
Between P25 and P30
⎯
⎯
130
Ω
⎯
PD0 to PD7, PE0, PE1
Pull-up/
Pull-down
resistance
I2C bus switch
connection
resistance
50
Unit
Min
Other than
PD0 to PD7, PE0, PE1
Input leak current
Value
IIL
⎯
DS07-16706-4E
MB91313A Series
4. AC Characteristics
(1) Clock Timing
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Pin
name
Symbol
Clock frequency
Sub clock frequency
Value
Conditions
Min
Unit
Max
Remarks
fC
X0, X1
⎯
10
16.5
33
PLL clock (self-oscillation
16.5 MHz doubled via
MHz
PLL : internal operation at
33 MHz Max.)
fclk
X0A,
X1A
⎯
⎯
32.768
⎯
kHz
⎯
⎯
33
MHz CPU
⎯
⎯
33
MHz Peripheral
⎯
⎯
16.5
fCP
Internal operating clock
frequency
Typ
⎯
fCPP
⎯
fCPT
MHz External bus
(2) Clock Output Timing
(VDDE = AVCC = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Symbol
Pin
name
Cycle time
tCYC
CLK
CLK ↑ → CLK ↓
tCHCL
CLK
CLK ↓ → CLK ↑
tCLCH
CLK
Parameter
Value
Conditions
⎯
Unit Remarks
Min
Max
60.7
⎯
ns
*1
1/2 × tCYC − 5
1/2 × tCYC + 5
ns
*2
1/2 × tCYC − 5
1/2 × tCYC + 5
ns
*3
*1 : tCYC is the frequency of one clock cycle after gearing.
*2 : These ratings are for the gear ratio set to × 1.
For the ratings when the gear ratio is set to between 1/2, 1/4 and 1/8, substitute 1/2, 1/4 or 1/8 for n in the
following equation.
(1/2 × 1/n) × tCYC − 10
*3 : These ratings are for the gear ratio set to × 1.
tCYC
tCHCL
CLK
VOH
tCLCH
VOH
VOL
(3) PLL Oscillation Stabilization Wait Time
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
PLL oscillation stabilization
wait time
tLOCK
DS07-16706-4E
Value
Min
Max
600
⎯
Unit
Remarks
μs
The length of time to wait for the PLL
oscillations to stabilize.
51
MB91313A Series
(4) Reset Input
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin
name
INITX input time
(at power-on)
INITX input time
(other than power-on)
INITX input time
(Stop recovery time)
tINTL
INITX
Value
Conditions
Unit
Min
Max
Oscillation stabilization delay time
of oscillator + tcp × 10
⎯
μs
tcp × 10
⎯
ns
Oscillation stabilization delay time
of oscillator + tcp × 10
⎯
μs
⎯
tINTL
INITX
52
0.2 VCC
DS07-16706-4E
MB91313A Series
(5) Multiplexed Bus Access Read/Write Operation
(Ta = − 40 °C to + 85 °C, VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V)
Symbol
Pin name
Conditions
CS0X to CS3X setup
tCSLCH
CLK
CS0X to CS3X
AWRxL :
W02 = 0
AD15 to AD00
address setup time
→ CLK↑
tASCH
CLK ↑ →
AD15 to AD00
address hold time
tCHAX
AD15 to AD00 address
setup time
→ ASX ↑
tASASH
ASX ↑ →
AD15 to AD00
address hold time
tASHAX
WR0X, WR1X delay time
tCHWL
WR0X, WR1X delay time
tCHWH
WR0X, WR1X minimum
pulse width
tWLWH
WR0X, WR1X
Data setup → WRxX ↑
tDSWH
WRxX ↑ → Data hold time
tWHDX
RDX delay time
tCHRL
RDX delay time
tCHRH
RDX ↓ →
Valid data input time
tRLDV
Data setup → RDX ↑ time
tDSRH
RDX ↑ → Data hold time
tRHDX
RDX minimum pulse
width
tRLRH
ASX setup
tASLCH
ASX hold
tASHCH
Parameter
Value
Unit
Remarks
⎯
ns
*1
3
⎯
ns
3
⎯
ns
12
⎯
ns
*2
tCYC − 6
tCYC + 6
ns
*2
⎯
6
ns
⎯
6
ns
tCYC − 3
⎯
ns
WR0X, WR1X
AD15 to AD00
tCYC
⎯
ns
3
⎯
ns
CLK
RDX
⎯
6
ns
⎯
6
ns
⎯
tCYC − 30
ns
30
⎯
ns
0
⎯
ns
RDX
tCYC − 3
⎯
ns
CLK
ASX
3
⎯
ns
3
⎯
ns
CLK
AD15 to AD00
(Address)
ASX
AD15 to AD00
(Address)
WR0X, WR1X
RDX
AD15 to AD00
⎯
Min
Max
3
*3
*1 : AWRxL : Area Wait Register
*2 : When CSxX → RDX/WRxX setup extension = 1
*3 : When the bus timing is delayed by automatic wait insertion or RDY input, add the time (tCYC × the number of
cycles added for the delay) to this rating.
Note: When the external load capacitance C = 50 pF.
DS07-16706-4E
53
MB91313A Series
• CSxX → RDX/WRxX setup extension = 1
tCYC
BA1
CLK
VOH
ASX
BA2
BA1W
VOH
VOH
tASLCH
tASHCH
BA3
VOH
VOH
VOH
VOH
VOL
tASASH
tASHAX
tCSLCH
CS0X to CS3X
VOL
tASCH
AD15 to AD00
VOH
VOL
tCHAX
Address
VOH
VIH
VOL
VIL
VIH
Read data
tDSRH
VIL
tRHDX
tRLDV
VOH
RDX
VOL
tRLRH
tCHRH
tCHRL
AD15 to AD00
VOH
VOL
Address
VOH
VOH
VOL
VOL
tDSWH
WR0X, WR1X
VOH
Write data
VOL
tWHDX
VOH
VOL
tWLWH
tCHWL
54
tCHWH
DS07-16706-4E
MB91313A Series
• CSxX → RDX/WRxX setup extension = 0
tCYC
BA1
CLK
VOH
ASX
BA2
VOH
BA3
VOH
VOH
VOH
VOH
VOH
tASLCH
tASHCH
tCSLCH
CS0X to CS3X
VOL
tASCH
AD15 to AD00
VOH
VOL
tCHAX
Address
VOH
VIH
VOL
VIL
VIH
Read data
tDSRH
VIL
tRHDX
tRLDV
RDX
VOH
VOL
tRLRH
tCHRH
tCHRL
AD15 to AD00
VOH
VOL
Address
VOH
VOH
Write data
VOL
VOL
tDSWH
WR0X, WR1X
tWHDX
VOH
VOL
tWLWH
tCHWL
DS07-16706-4E
tCHWH
55
MB91313A Series
(6) Ready Input Timings
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
Symbol
Pin name
Conditions
RDY setup time →
CLK ↓
tRDYS
CLK, RDY
CLK ↓ → RDY hold time
tRDYH
CLK, RDY
Value
Unit
Min
Max
⎯
25
⎯
ns
⎯
0
⎯
ns
tCYC
CLK
VOH
VOH
VOL
VOL
tRDYS tRDYH
RDY wait applied
RDY wait not applied
56
tRDYS tRDYH
VIH
VIL
VIH
VIL
VIH
VIH
VIL
VIL
DS07-16706-4E
MB91313A Series
(7) UART timing
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↓ → SOT delay time
tSLOV
Valid SIN → SCK ↑
tIVSH
SCK ↑ → valid SIN hold time
Conditions
Value
Unit
Min
Max
SCK0 to SCK10
4 tCYCP
⎯
ns
SCK0 to SCK10
SOT0 to SOT10
− 20
+ 20
ns
Internal shift
SCK0 to SCK10 clock operation
SIN0 to SIN10
30
⎯
ns
tSHIX
SCK0 to SCK10
SIN0 to SIN10
20
⎯
ns
Serial clock “H” pulse width
tSHSL
SCK0 to SCK10
2 tCYCP
⎯
ns
Serial clock “L” pulse width
tSLSH
SCK0 to SCK10
2 tCYCP
⎯
ns
SCK ↓ → SOT delay time
tSLOV
SCK0 to SCK10
SOT0 to SOT10
⎯
30
ns
Valid SIN → SCK ↑
tIVSH
SCK0 to SCK10
SIN0 to SIN10
20
⎯
ns
SCK ↑ → valid SIN hold time
tSHIX
SCK0 to SCK10
SIN0 to SIN10
20
⎯
ns
External shift
clock operation
Notes : • The above standards apply to the CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50 pF.
DS07-16706-4E
57
MB91313A Series
• Internal shift clock mode
tSCYC
SCK0 to SCK10
VOH
VOL
VOL
tSLOV
VOH
VOL
SOT0 to SOT10
tIVSH
tSHIX
VIH
VIL
SIN0 to SIN10
VIH
VIL
• External shift clock mode
tSLSH
SCK0 to SCK10
tSHSL
VOL
VOL
VOH
VOH
tSLOV
SOT0 to SOT10
VOH
VOL
tIVSH
SIN0 to SIN10
58
VIH
VIL
tSHIX
VIH
VIL
DS07-16706-4E
MB91313A Series
(8) Reload timer clock, PPG timer input, multifunction timer input timing
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
Symbol
Input pulse width
Pin name
Conditions
TMI0 to TMI3
TIN0 to TIN5
TRG0 to TRG3
tTIWH
tTIWL
Value
Unit
Remarks
⎯
ns
*1
3 tCYCP
⎯
ns
*1
1.0
⎯
μs
*2
Min
Max
2 tCYCP
⎯
INT0 to INT23
*1 : tCYCP represents the peripheral clock cycle time, except when in stop mode.
*2 : When in stop mode.
VIH
TMI0 to TMI3
TIN0 to TIN5
TRG0 to TRG3
INT0 to INT23
VIH
VIL
VIL
tTIWH
tTIWL
(9) Trigger Input Timing
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
A/D activation trigger input time
Symbol
Pin name
Conditions
tATRG
ATRG
⎯
Value
Min
Max
5 tCYCP
⎯
Unit
ns
Note : tCYCP is the cycle time of the peripheral clock.
tATRG
ATRG
VIL
DS07-16706-4E
VIL
59
MB91313A Series
(10) Remote control signal input timing
(VDDE = 3.3 V + 0.3 V, VDDI = 1.8 V + 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
Remote control input
pulse width
Symbol Pin name
tRCIN
RCIN0
RCIN1
Conditions
At 32.768 kHz
Value
Min
Max
62
⎯
Unit
Remarks
μs
Count 2 clocks or
more
tRCIN
RCIN0
RCIN1
60
VIH
VIL
VIH
VIL
DS07-16706-4E
MB91313A Series
(11) I2C timing
• When operating in master mode
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
SymPin name
bol
Conditions
Typical mode
High-speed
mode*1
Min
Max
Min
Max
Unit
fSCL
SCKn
(SCLn)
0
100
0
400
kHz
tHDSTA
SOTn
(SDAn)
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
SCL clock “L” width
tLOW
SCKn
(SCLn)
4.7
⎯
1.3
⎯
μs
SCL clock “H” width
tHIGH
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
“Repeated START
condition” setup time
SCL ↑→ SDA ↓
tSUSTA
SCKn
(SCLn)
4.7
⎯
0.6
⎯
μs
tHDDAT
SOTn
(SDAn)
SCKn
(SCLn)
0
3.45*2
0
0.9*3
μs
tSUDAT
SOTn
(SDAn)
SCKn
(SCLn)
250
⎯
100
⎯
ns
tSUSTO
SOTn
(SDAn)
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
Bus free time between
“STOP condition” and
“START condition”
tBUF
⎯
4.7
⎯
1.3
⎯
μs
Noise filter
tSP
⎯
2 tCYCP*4
⎯
2 tCYCP*4
⎯
ns
SCL clock frequency
“(Repeated) START condition”
hold time SDA ↓ → SCL ↓
Data hold time
SCL ↓ → SDA ↓ ↑
Data setup time
SDA ↓ ↑ → SCL ↑
“STOP condition” setup time
SCL ↑ → SDA ↑
CL = 50 pF,
R = (Vp/IOL)*1
⎯
*1 : R and C represent the pull-up resistance and load capacitance of the SCL and SDA lines, respectively. Vp
indicates the power supply voltage of the pull-up resistance and IOL indicates VOL guaranteed current.
*2 : The maximum tHDDAT must satisfy that it doesn't extend at least “L” period (tLOW) of device's SCL signal.
*3 : A high-speed mode I2C bus device can be used on a standard mode I2C bus system as long as the device
satisfies the requirement of “tSUDAT ≥ 250 ns”.
*4 : tCYCP is the peripheral clock cycle time. To use I2C, set the peripheral bus clock at 8 MHz or more.
DS07-16706-4E
61
MB91313A Series
VOH
VOL
SDA
tLOW
tSUSTA
tSUDAT
tBUF
VOH
VOL
SCL
tHDSTA
62
tHDDAT
tHIGH
tHDSTA
tSP
tSUSTO
DS07-16706-4E
MB91313A Series
• When operating in slave mode
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Parameter
Symbol Conditions
High-speed
mode*1
Typical mode
Min
Max
Min
Max
Unit
SCL clock frequency
fSCL
0
100
0
400
kHz
“L” period of SCL clock
tLOW
4.7
⎯
1.3
⎯
μs
“H” period of SCL clock
tHIGH
4.0
⎯
0.6
⎯
μs
Bus free time between
“STOP condition” and
“START condition”
tBUS
4.7
⎯
1.3
⎯
μs
SCL ↓ → SDA output delay
time
tDLDAT
⎯
5 × M*3
⎯
5 × M*3
ns
“Repeated START condition”
setup time SCL ↑ → SDA ↓
tSUSTA
4.7
⎯
0.6
⎯
μs
R = 1 kΩ,
C = 50 pF*2
“Repeated START condition”
hold time SDA ↓ → SCL ↓
tHDSTA
4.0
⎯
0.6
⎯
μs
“STOP condition” setup time
SCL ↑ → SDA ↑
tSUSTO
4.0
⎯
0.6
⎯
μs
SDA data input hold time
(vs. SCL ↓)
tHDDAT
2 × M*3
⎯
2 × M*3
⎯
μs
SDA data input setup time
(vs. SCL ↑)
tSUDAT
250
⎯
100*4
⎯
ns
Remarks
The first
clock pulse
is generated after this.
*1 : For use at over 100 kHz, set the resource clock to 6 MHz or higher.
*2 : R and C represent the pull-up resistance and load capacitance of the SCL and SDA output lines, respectively.
*3 : M = Resource clock cycle (ns)
*4 : A high-speed mode I2C bus device can be used on a standard mode I2C bus system as long as the device
satisfies the requirement of “tSUDAT ≥ 250 ns”.
When a device does not extend the “L” period of the SCL signal, the next data must be output to the SDA line
within 1250 ns (maximum SDA/SCL rise time + tSUDAT) from when the SCL line is released.
• I2C timing
0.8 VDDE
SDA
0.2 VDDE
tBUS
tLOW
tHIGH
tHDSTA
0.8 VDDE
SCL
0.2 VDDE
tHDSTA
tHDDAT
tSUDAT
tSUSTA
tSUSTO
fSCL
DS07-16706-4E
63
MB91313A Series
5. Electrical Characteristics for the A/D Converter
(1) Electrical Characteristics
(VDDE = 3.3 V ± 0.3 V, VDDI = 1.8 V ± 0.15 V, VSS = 0 V, Ta = −40 °C to + 85 °C)
Value
Parameter
Unit
Min
Typ
Max
Resolution
⎯
⎯
10
bit
Total error*1
⎯
⎯
± 5.5
LSB
Nonlinear error*1
⎯
⎯
± 3.5
LSB
Differential linear error*1
⎯
⎯
± 2.0
LSB
Zero transition voltage*1
AVSS − 4.0 LSB
⎯
AVSS + 6.0 LSB
V
Full transition voltage*1
AVRH − 5.5 LSB
⎯
AVRH + 3.0 LSB
V
7.94*2
⎯
⎯
μs
Power supply current
(analog + digital)
⎯
⎯
3
mA
Reference power supply current
(between AVRH and AVSS)
⎯
⎯
100
μA
Analog input capacitance
⎯
⎯
21
pF
Interchannel disparity
⎯
⎯
4
LSB
Conversion time
Remarks
AVcc = 3.3 V,
AVRH = 3.3 V
(CPU sleep)
AVRH = 3.0 V,
AVSS = 0.0 V
*1 : Measured in the CPU sleep state
*2 : Depending on the clock cycle supplied to peripheral resources
Comparator
RIN
AN9 to AN0
Analog input pin
CIN
RIN = 5 kΩ
CIN = 21 pF
• The relationship between peripheral clock and external impedance
(Peripheral clock frequency and external impedance)
(Peripheral clock cycle and external impedance)
MB91F313A
External impedance [kΩ]
External impedance [kΩ]
MB91F313A
120
110
100
90
80
70
60
50
40
30
20
20
15
20
25
30
35
Peripheral clock frequency [MHz]
64
40
120
110
100
90
80
70
60
50
40
30
20
10
30
50
70
90
110
Peripheral clock cycle [ns]
DS07-16706-4E
MB91313A Series
(2) Definition of terms
Resolution
Linearity error
: Analog variation that is recognized by an A/D converter.
: The deviation between the actual conversion characteristics and a straight line
connecting the device's zero transition point (“00 0000 0000B” ←→ “00 0000 0001B”)
and full scale transition point (“11 1111 1110B” ←→ “11 1111 1111B”).
Differential linear error : Deviation from the ideal value of the input voltage that is required to change the output
code by 1 LSB.
Total error
: This error indicates the difference between actual and ideal values, including the zero
transition error/full-scale transition error/linearity error
Linearity error
3FFH
Differential linearity error
Actual conversion characteristics
Actual conversion characteristics
(N + 1)H
3FEH
{1 LSB' (N − 1) + VOT}
VFST
(measurement value)
VNT
(measurement
value)
004H
003H
Digital output
Digital output
3FDH
Ideal characteristics
NH
Actual conversion
characteristics
002H
Ideal characteristics
001H
(N − 2)H
VOT (measurement value)
AVSS
AVRH
Analog input
V(N + 1)T
(measurement value)
(N − 1)H
VNT
(measurement
value)
Actual conversion
characteristics
AVSS
AVRH
Analog input
VNT − {1 LSB' × (N − 1) + VOT}
[LSB]
1 LSB'
V (N+1) T − VNT
−1[LSB]
Differential linear error in digital output N =
1 LSB'
VFST − VOT
[V]
1 LSB =
1022
Linear error in digital output N =
N
VOT
VFST
VNT
: A/D converter digital output value
: The voltage at which digital output changes from (000) H to (001) H
: The voltage at which digital output changes from (3FE) H to (3FF) H
: The voltage at which digital output changes from (N + 1) H to NH
(Continued)
DS07-16706-4E
65
MB91313A Series
(Continued)
Total error
3FFH
1.5 LSB'
3FEH
Actual conversion
characteristics
Digital output
3FDH
{1 LSB' (N - 1) + 0.5 LSB'}
004H
VNT
003H
(measurement
value)
002H
Actual conversion
characteristics
Ideal characteristics
001H
0.5 LSB'
AVSS
AVRH
Analog input
AVRH − AVSS
[V]
1024
VNT − {1 LSB' × (N − 1) + 0.5 LSB'}
Total error of digital output N =
1 LSB'
1LSB' (ideal value) =
N : A/D converter digital output value
VNT : The voltage at which digital output changes from (N + 1) H to NH
VOT' (ideal value) = AVSS + 0.5 LSB' [V]
VFST' (ideal value) = AVRH − 1.5 LSB' [V]
66
DS07-16706-4E
MB91313A Series
6. Flash Memory Write/Erase Characteristics
(VDDE = 3.3 V, VDDI = 1.8 V, Ta = + 25 °C)
Parameter
Value
Unit
Remarks
3.6
s
Excludes internal programming prior erasure.
23
370
μs
Excludes system-level overhead.
⎯
6.2
102
s
Excludes system-level overhead.
10000
⎯
⎯
cycle
10*
⎯
⎯
year
Min
Typ
Max
Sector erase time
⎯
0.9
Word write time
⎯
Chip write time
Erase/write cycle
Data retention time
Average Ta = + 85 °C
* : This value comes from the technology qualification (using Arrhenius equation to translate high temperature
measurements into normalized value at + 85 °C).
DS07-16706-4E
67
MB91313A Series
■ ORDERING INFORMATION
Part number
MB91F313APMC-GE1
68
Package
120-pin plastic LQFP
(FPT-120P-M21)
DS07-16706-4E
MB91313A Series
■ PACKAGE DIMENSION
120-pin plastic LQFP
Lead pitch
0.50 mm
Package width ×
package length
16.0 × 16.0 mm
Lead shape
Gullwing
Sealing method
Plastic mold
Mounting height
1.70 mm MAX
Weight
0.88 g
Code
(Reference)
P-LFQFP120-16×16-0.50
(FPT-120P-M21)
120-pin plastic LQFP
(FPT-120P-M21)
Note 1) * : These dimensions do not include resin protrusion.
Resin protrusion is +0.25(.010) MAX(each side).
Note 2) Pins width and pins thickness include plating thickness.
Note 3) Pins width do not include tie bar cutting remainder.
18.00±0.20(.709±.008)SQ
+0.40
* 16.00 –0.10 .630 +.016
–.004 SQ
90
61
91
60
0.08(.003)
Details of "A" part
+0.20
1.50 –0.10
+.008
(Mounting height)
.059 –.004
INDEX
0~8°
120
LEAD No.
1
30
0.50(.020)
C
"A"
31
0.22±0.05
(.009±.002)
0.08(.003)
M
0.145
.006
2002-2010 FUJITSU SEMICONDUCTOR LIMITED F120033S-c-4-7
+0.05
–0.03
+.002
–.001
0.60±0.15
(.024±.006)
0.10±0.05
(.004±.002)
(Stand off)
0.25(.010)
Dimensions in mm (inches).
Note: The values in parentheses are reference values.
Please check the latest package dimension at the following URL.
http://edevice.fujitsu.com/package/en-search/
DS07-16706-4E
69
MB91313A Series
■ MAJOR CHANGES IN THIS EDITION
Page
Section
⎯
⎯
Change Results
Changed the series name.
MB91313/A → MB91313A
5
■ PIN ASSIGNMENT
Deleted the footnote.
8
■ PIN DESCRIPTION
Changed I/O circuit type of pin number 32, 33.
D/B → B
■ HANDLING DEVICE
Added the explanation as follows.
Turning on/off these power supplies (VDDI/Analog/VDDE) simultaneously causes no problem.
■ RESTRICTIONS
Deleted the following sentence.
“9) External interrupt INT17, INT19 (MB91F313 only)”.
19
22
The vertical lines marked in the left side of the page show the changes.
70
DS07-16706-4E
MB91313A Series
MEMO
DS07-16706-4E
71
MB91313A Series
FUJITSU SEMICONDUCTOR LIMITED
Nomura Fudosan Shin-yokohama Bldg. 10-23, Shin-yokohama 2-Chome,
Kohoku-ku Yokohama Kanagawa 222-0033, Japan
Tel: +81-45-415-5858
http://jp.fujitsu.com/fsl/en/
For further information please contact:
North and South America
FUJITSU SEMICONDUCTOR AMERICA, INC.
1250 E. Arques Avenue, M/S 333
Sunnyvale, CA 94085-5401, U.S.A.
Tel: +1-408-737-5600 Fax: +1-408-737-5999
http://us.fujitsu.com/micro/
Asia Pacific
FUJITSU SEMICONDUCTOR ASIA PTE. LTD.
151 Lorong Chuan,
#05-08 New Tech Park 556741 Singapore
Tel : +65-6281-0770 Fax : +65-6281-0220
http://www.fujitsu.com/sg/services/micro/semiconductor/
Europe
FUJITSU SEMICONDUCTOR EUROPE GmbH
Pittlerstrasse 47, 63225 Langen, Germany
Tel: +49-6103-690-0 Fax: +49-6103-690-122
http://emea.fujitsu.com/semiconductor/
FUJITSU SEMICONDUCTOR SHANGHAI CO., LTD.
Rm. 3102, Bund Center, No.222 Yan An Road (E),
Shanghai 200002, China
Tel : +86-21-6146-3688 Fax : +86-21-6335-1605
http://cn.fujitsu.com/fss/
Korea
FUJITSU SEMICONDUCTOR KOREA LTD.
206 Kosmo Tower Building, 1002 Daechi-Dong,
Gangnam-Gu, Seoul 135-280, Republic of Korea
Tel: +82-2-3484-7100 Fax: +82-2-3484-7111
http://kr.fujitsu.com/fmk/
FUJITSU SEMICONDUCTOR PACIFIC ASIA LTD.
10/F., World Commerce Centre, 11 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel : +852-2377-0226 Fax : +852-2376-3269
http://cn.fujitsu.com/fsp/
Specifications are subject to change without notice. For further information please contact each office.
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose
of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device; FUJITSU SEMICONDUCTOR does
not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating
the device based on such information, you must assume any responsibility arising out of such use of the information.
FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use
or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any
third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right
by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or
other rights of third parties which would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for general use, including without
limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured
as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect
to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in
nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in
weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions.
Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations
of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
Edited: Sales Promotion Department