9000 SERIES/MOLDED SIP REED RELAYS

9000 SERIES/MOLDED SIP REED RELAYS
9000 Series High Performance SIP Reed Relays
The SIP relay is the industry standard when high reliability and consistent performance are desired in a compact package. The 9001 and 9002 are high performance
relays ideally suited for Automatic Test Equipment, Instrumentation, RF and Telecommunications applications. The specification tables allow you to select the appropriate relay for your application.
9000 Series Features
u High Insulation Resistance - 1012 Ω minimum (1013 Ω typical)
u High reliability, hermetically sealed contacts for long life
(tested up to 1 Billion Operations)
u High dielectric strength available, consult factory
u High speed switching compared to electromechanical relays
u Molded thermoset body on integral lead frame design
u Coaxial Shield for 50Ω impedance and switching of fast rise time
digital pulses - 9002 only
u Optional Coil Suppression Diode - protects coil drive circuits
u UL File #E67117, CSA File #028537 - Contact factory for details
u RoHS compliant
DIMENSIONS
in Inches (Millimeters)
Model 9001
.760 Max (19.3)
.780 Max.
(19.8) w/Shell
.133
(3.4) Max.
.020
(0.5)
.020 REF.
(0.51)
.200 (Typ.)
(5.08)
Model 9002
.300 Max (7.6)
.320 Max. (8.1) w/Shell
.010
(0.25)
.200 Max (5.08)
.222 Max. (5.64) w/Shell
.760 Max (19.3)
.780 Max.
(19.8) w/Shell
.200 Max (5.08)
.222 Max. (5.64) w/Shell
.020
(0.5)
.133
(3.4) Max.
.100 (Typ.)
(2.54)
.200 (Typ.)
(5.08)
.200 Max (5.08)
.222 Max. (5.64) w/Shell
.020
(0.5)
.200 (Typ.)
(5.08)
.020 REF.
(0.51)
.300 Max (7.6)
.320 Max. (8.1) w/Shell
.133
(3.4) Max.
.010
(0.25)
NOTE
u
.010
(0.25)
30o
Alternate Package
.760 Max (19.3)
.780 Max.
(19.8) w/Shell
.300 Max (7.6)
.320 Max. (8.1) w/Shell
For RF Graph Performance, see “RF Graphs” section
of the Reed Relay Technical & Application Information
Ordering Information
Part Number
Model Number
9001 9002
Coil Voltage
05=5 volts
12=12 volts
90XX-XX-XX
General Options
0 = No Diode
1 = Diode2
Magnetic Shield Option
0 = No Shield
1 = Shield
07082013
tel: (401) 943.2686
|
fax: (401) 942.0920
MODEL NUMBER
Parameters
COIL SPECS.
Test Conditions
Units
90012
90022
4 Pin SIP
6 Pin SIP
Nom. Coil Voltage
VDC
5 12
5 12
Max. Coil Voltage
VDC
6.5 15.0
6.5 15.0
+/- 10%, 25° C
Ω
500 1000
350 750
Operate Voltage
Must Operate by
VDC - Max.
3.75 9.0
3.75 9.0
Release Voltage
Must Release by
VDC - Min.
0.4 1.0
0.4 1.0
Coil Resistance
CONTACT RATINGS
Switching Voltage
Max DC/Peak AC Resist.
Volts
200
200
Switching Current
Max DC/Peak AC Resist.
Amps
0.5
0.5
Carry Current
Max DC/Peak AC Resist.
Amps
1.5
1.5
Contact Rating
Max DC/Peak AC Resist.
Watts
10
10
Life Expectancy-Typical1
Signal Level 1.0V, 10mA
x 106 Ops.
1000
1000
Static Contact
Resistance (max. init.)
50mV, 10mA
Ω
0.150
0.150
Dynamic Contact
Resistance (max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.200
0.200
Insulation Resistance
(minimum)
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
1012
1012
Capacitance - Typical
Across Open Contacts
No Shield
Shield Floating
Shield Guarding
pF
pF
pF
0.7
-
0.8
0.1
Open Contact to Coil
No Shield
Shield Floating
Shield Guarding
pF
pF
pF
1.4
-
1.4
0.5
Contacts Open, Shield Floating
pF
-
1.4
Dielectric Strength
(minimum)
Between Contacts
Contacts to Coil
Contacts/Shield to Coil
VDC/peak AC
VDC/peak AC
VDC/peak AC
300
1500
300
1500
1500
Operate Time - including
bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave
msec.
0.35
0.35
msec.
0.1
0.1
RELAY SPECIFICATIONS
Contact to Shield
Release Time - Typical
Top View:
Dot stamped on relay refers to pin #1
Grid = .1”x.1” (2.54mm x 2.54mm)
1
2
3
4
1
5
2
3
6
4
Notes:
Consult factory for life expectancy at other switching loads. Resistance >0.5Ω
defines end of life or failure to open.
2
Optional diode is connected to pin #2(+) and pin #3(-). Correct coil polarity must be observed.
1
Environmental Ratings:
Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
For most recent data visit www.cotorelay.com
COTO TECHNOLOGY, INC.
07082013