9011, 9012 & 9117 MINIATURE SIP RELAYS 9011, 9012 & 9117 Series Miniature Molded SIP Reed Relays The 9011, 9012 & 9117 are compact versions of Coto’s standard 9000 SIPs, with the 9011 and 9117 using 65% less board space and the 9012 using 47% less board space (LxW). These miniature SIP relays are ideal for use in ATE applications and other high reliability test, measurement and telecommunications applications where high board density and long life are key requirements. 9011, 9012 & 9117 Series Features u 9012 is a 10W SIP relay (.400” x .150” x .400”) u 9011 is a 3W SIP relay (.400” x .150” x .265”) u 9117 is the smallest 3W SIP relay (.270” x .150” x .385”) u Magnetic shielding reduces interaction u Optional coil suppression diode protects coil drive circuits u UL File #E67117 - Contact factory for details u High insulation resistance 1012Ω minimum u High speed switching u Molded thermoset body on integral lead frame design u High reliability, hermetically sealed contacts for long life u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9011 IDENTIFIES PIN #1 0.050 Ref. (1.27) 0.100 (2.54) 0.150 Max. (3.81) 0.400 Max. (10.16) 1 2 3 Model 9012 4 .400 Max. (10.16) 1 0.010 Typ. (0.25) 0.130 (3.30) 0.200 (5.08) 0.300 (7.62) .150 Max. (3.81) .265 Max. (6.73) 0.020 (0.51) 30o 0.050 (1.27) SEE LEAD DETAIL 0.025 (0.64) .020 (0.51) .012 (0.30) 2 3 0.100 (2.54) 0.200 (5.08) 0.300 (7.62) 4 0.015 (.381) 0.010 Typ. (0.25) 0.130 (3.30) SEE LEAD DETAIL LEAD DETAIL (TYP.) Model 9117 IDENTIFIES PIN #1 0.400 Max. (10.16) IDENTIFIES PIN #1 .150 Max (3.81) .270 Max (6.85) Ordering Information .385 Max (9.77) 1 2 3 4 .015 Typ. (.38) .044 Ref. (1.11) .060 (1.52) .120 (3.04) .180 (4.57) .011 (.27) .125 (3.17) .010 (.25) Part Number 90XX-XX-1X Model Number General Options2 9011 9012 9117 0=No Diode 1=Diode Coil Voltage 05=5 volts 12=12 volts (N/A on 9117) Magnetic Shield 1=Mag Shield (External 9011, 9117; Internal 9012) 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters Test Conditions Units 90112,3 90122,3 91172,3 (3 Watt) 4 Pin SIP (10 Watt) 4 Pin SIP (3 Watt) Narrow Fit COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 5 Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 6.0 +/- 10%, 25° C Ω 500 750 500 750 400 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 3.75 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 0.5 Coil Resistance CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 100 200 100 Switching Current Max DC/Peak AC Resist. Amps 0.25 0.5 0.25 Carry Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.5 Contact Rating Max DC/Peak AC Resist. Watts 3 10 3 Life Expectancy-Typical1 Signal Level 1.0V, 10mA x 106 Ops. 250 1000 250 Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.150 0.120 0.120 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.200 0.200 0.200 Between all Isolated Pins at 100V, 25°C, 40% RH Ω 1012 1012 1012 Capacitance - Typical Across Open Contacts pF 0.7 0.7 0.14 Open Contact to Coil pF 1.4 1.4 N/A Between Contacts Contacts to Coil VDC/peak AC VDC/peak AC 200 1500 200 1500 150 1500 At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.35 0.35 0.2 msec. 0.1 0.1 0.1 RELAY SPECIFICATIONS Insulation Resistance (minimum) Dielectric Strength (minimum) Operate Time - including bounce - Typical Release Time - Typical Top View: Grid = .1”x.1” (2.54mm x 2.54mm) 1 2 3 4 Notes: Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open. Optional diode is connected to pin #2(+) and pin #3(-) for 9011 & 9012; pin #1(+) and pin #2(-) for 9117. Correct coil polarity must be observed. 3 9011 & 9117 external mag shield. 9012 internal mag shield. 1 2 Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. 07082013