9913 SURFACE MOUNT REED RELAYS 9913 Series Surface Mount Reed Relays Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications designers, Coto’s 9913 Series is an ultraminiature Surface Mount Reed Relay with the smallest footprint available in the market. The external Magnetic Shield reduces interaction between parts in high density boards. Small size allows for high density packaging which makes these relays ideal where high pin count and high performance are needed. 9913 Series Features u Available in a compact J Bend SMD package u Tape and Reel packaging available u High reliability, hermetically sealed contacts for long life u High Insulation Resistance - 1011 Ω minimum u External Magnetic Shield u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9913 4X .015 (0.38) .350 (8.89) MAX PIN #1 INDICATOR .150 (3.81) MAX .142 (3.61) MAX .010 (0.25) .035 ± .012 (0.89 ± 0.30) .005 (0.11) .362 (9.19) MAX 2X .100 (2.5) Ordering Information Part Number Coil Voltage 05=5 volts 9913-XX-XX Lead Style 20=J- Lead 01152015 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters 9913 Test Conditions Units COIL SPECS. Nom. Coil Voltage Coil Resistance 1 Form A MIN NOM MAX VDC - 5.0 6.0 +/- 10%, 25° C Ω 180 200 220 Operate Voltage Must Operate by VDC - Max. - - 3.8 Release Voltage Must Release by VDC - Min. 0.4 - - Switching Voltage Max DC/Peak AC Resist. Volts - - 100 Switching Current Max DC/Peak AC Resist. Amps - - 0.25 Carry Current Max DC/Peak AC Resist. Amps - - 0.5 Contact Rating, Switching Max DC/Peak AC Resist. Watts - - 1 V, 10mA Ops. - 500 x 10 50mV, 10mA Ω - - 0.150 0.5V, 50mA at 100 Hz, 1.5 msec Ω - 0.150 @100 VDC 25º , 40% RH Ω 1011 - - Capacitance Across Open Contacts - pF - 0.2 - Capacitance Open Contact to Coil - pF - 0.5 - Dielectric Strength (minimum) Between Contacts VDC/peak AC 150 - - Operate Time including bounce At Nominal Coil Voltage, 30 Hz Square Wave msec. - 0.25 0.3 msec. - - 0.05 CONTACT RATINGS Life Expectancy-Signal Load Static Contact Resistance Dynamic Contact Resistance Insulation Resistance All isolated points 5 - 6 RELAY SPECIFICATIONS Release Time Zener Diode Suppression Top View: Dot stamped on top of relay refers to pin #1 location 1 2 3 4 RECOMMENDED PAD LAYOUT 0.406 (10.30) Notes: All parameters specified per EIA/NARM Standards for dry reed relays, no #RS-421 & RS-436 unless otherwise noted, all parameters specified @ 25ºC & 40% RH. 2 Vibration: 20G’s to 2000 Hz Shock: 50G’s 3 All parameters measured at 25ºC unless otherwise specified. 4 Surface mount component processing themperature: 500ºF / 260ºC Max 1 minute dwell time. 1 0.028 (0.71) 0.248 (6.30) 0.100 (2.54) 0.128 (3.25) 0.079 (2.01) Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C 01152015 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.