SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. Line Filter NAME REV. TF0808□□□□L□-□□□ PAGE 20141209-B 1 Ⅰ﹒Configuration and dimensions： 4 2 3 B 1 C A D Wψ 2 3 E 3 F 4 A B C D E F 7.60 max. 6.50 max. 9.00 max. 4.50 ±1.0 5.08 ±0.5 2.54 ±0.3 Ⅱ﹒Schematic diagram： N1 2 3 1 4 N2 " "： Polarity Ⅲ﹒Description： a﹒Ferrite Toroidal core construction. b﹒Enamelled copper wire：F class c﹒Product weight： 0.52g（ref.） d﹒Moisture sensitivity Level 1 e﹒Products comply with RoHS' requirements f﹒Halogen free available Ⅳ﹒General specification： a﹒Storage temp.：-40℃ ---- +105℃ b﹒Operating temp.：-40℃ ---- +105℃ ( Temp. rise included. ) AR-001C Unit：m/m Wψ 0.60 ±0.05 SPECIFICATION FOR APPROVAL REF. : TF0808□□□□L□-□□□ ABC'S DWG NO. PROD. Line Filter NAME REV. 20141209-B PAGE 2 Ⅴ﹒Electrical characteristics： Inductance ( μH ) HP4261A 1V , 1KHz L1 , L2 L1 - L2 DC Resistance ( mΩ ) Rated Current ( mA ) TF0808450YL□-□□□ 45±35% 4 max. 120 max. 500 10 min. TF0808650YL□-□□□ 65±35% 5 max. 150 max. 500 10 min. TF0808820YL□-□□□ 82±35% 6 max. 180 max. 500 10 min. DWG No. 1). Electrical specifications at 25℃ 2). Inductance test condition：LCR meter HP-4261A @ 1KHz / 1.0V 3). HI-POT test ( N1-N2 )：700Vac / 60Hz , 3mA ,1sec. 4). Rated current：500mA for temp. rise：20℃ max. 5). Isulation resistance：10MΩ min. @ 100Vdc Ⅵ﹒Curve： 7 5 Impedance ( KΩ ) 3 1 0.5 0.3 TR0808-820Y TR0808-650Y TR0808-450Y 0.1 1 10 100 Frequency ( MHz ) @Measuring circuit： HP4191A Impedance Analyzer AR-001C 300 Insulation Resistance ( MΩ / 100VDC ) SPECIFICATION FOR APPROVAL REF. : TF0808□□□□L□-□□□ ABC'S DWG NO. PROD. Line Filter NAME REV. PAGE 20141209-B 3 Ⅶ﹒Dwging number expression： T F 0 8 0 8 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements Appendix code 2：Package Information Code A AR-001C Inner package Tray Inner package Q'TY 396 pcs Remark SPECIFICATION FOR APPROVAL REF. : PROD. ABC'S DWG NO. Line Filter NAME REV. TF0808□□□□L□-□□□ 20141209-B PAGE 4 Ⅷ﹒Reliability test： Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 105℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 105℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 105℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.External Visual MIL-STD-883 Method 2009 constructions, marking and 6.Physical Dimensions JESD22 Method JB-100 Inspect product workmanship. 7.Resistance to solvents MIL-STD-202 Method 215 Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Verify physical dimensions to the applicable product detail specification. Per product specification standard Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±30%. 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.Method：Dip 2.Temperature：260±5℃ 3.Time（temp.≧ 260℃）：10 second. 4.Number of times：3 times. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 8.Vibration Test MIL-STD-202 Method 204 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 13.Solderability Test J-STD-002 Dip pads in flux then dip in solder pot at 240±5 for 5 senconds. Teminals area must have 95% min. Solder coverage. 14.Electrical Characteriazation User Spec. 1.Operating temperature：-40℃~105℃ 2.Room temperature：25℃. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 15.Withstanding Voltage Test MIL-STD-202 Method 201 1.DC:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. AR-001C 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±30%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±30%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±30%. 1.No mechanical and electrical damage. Apply double as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±30%. 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±30%. After test, inductors shall be no mechanical damage.