SPECIFICATION FOR APPROVAL REF. : SQ0805□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-B PAGE 1 Ⅰ﹒Configuration and dimensions： Marking B 100 A D G I I H F E D C' C Dot is start winding & inductance code （PCB Pattern） Unit：m/m A B C C' D E 8.80 ±0.3 6.00 ±0.3 4.50 ±0.3 5.00 ±0.7 1.40 ref. F 3.40 ref. 6.00 ref. G H I 5.00 ref. 4.00 ref. 2.00 ref. Ⅱ﹒Description： a﹒Ferrite drum core construction. b﹒Enamelled copper wire：F class c﹒Product weight： 0.69 g（ref.） Peak Temp：250℃ max. Max. Peak Temp - 5℃：30sec max. Max time above 217℃ ：60sec~150sec max. d﹒Moisture sensitivity Level 1 e﹒Products comply with RoHS' requirements Temperature Rising Area f﹒Halogen free available Preheat Area +4.0℃ / sec max. 150 ~ 200℃ / 60 ~ 120sec Reflow Area Forced Cooling Area +3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 250℃ 250 Ⅲ﹒General specification： a﹒Storage temp.：-40℃ ----+125℃ b﹒Operating temp.：-40℃----+125℃ (Temp. rise included) c﹒Resistance to solder heat：250℃.10 secs. AR-001C Temperature ( ℃ ) 217℃ 60sec~150sec 200 60sec max. 150 60sec~120sec 100 50 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF. : SQ0805□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-B PAGE 2 Ⅳ﹒Electrical characteristics： DWG No. Inductance ( μH ) SRF ( MHz ) nom. RDC ( mΩ ) max. Irms (A) Isat (A) SQ0805R56ML□ -□□□ 0.56 ±20% 200.0 4.50 9.00 12.00 SQ08051R2ML□ -□□□ 1.20 ±20% 100.0 8.20 6.00 8.80 SQ08052R2ML□ -□□□ 2.20 ±20% 75.0 16.00 4.50 6.50 SQ08054R7ML□ -□□□ 4.70 ±20% 35.0 35.00 3.00 4.20 SQ0805100ML□ -□□□ 10.00 ±20% 26.0 60.00 2.40 3.00 SQ0805150ML□ -□□□ 15.00 ±20% 19.0 90.00 2.00 2.40 SQ0805220ML□ -□□□ 22.00 ±20% 15.0 160.00 1.60 2.00 SQ0805330ML□ -□□□ 33.00 ±20% 10.0 185.00 1.20 1.60 SQ0805470ML□ -□□□ 47.00 ±20% 8.0 260.00 1.00 1.30 1). 2). "- ：Packaging information： □□□ "：Reference code Code 3). Electrical specifications at 25℃ 4). Isat base on △L/L0A=30% typ. 5). Irms base on Temp. rise 40℃ max. 6). Inductance Test Freq. at 100KHz / 0.25V. AR-001C SPECIFICATION FOR APPROVAL REF. : SQ0805□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-B PAGE Ⅴ﹒ Curve： SQ0805R56ML□ 70.0 0.6 60.0 0.5 50.0 0.4 40.0 △ T(℃ ) L(uH) 0.7 0.3 30.0 0.2 20.0 0.1 10.0 0.0 0.0 0.0 2.0 4.0 6.0 8.0 IDC(A) 10.0 12.0 14.0 0.0 2.0 4.0 6.0 8.0 IDC(A) 10.0 12.0 14.0 0.0 1.0 2.0 3.0 4.0 IDC(A) 5.0 6.0 7.0 0.0 0.5 1.0 1.5 2.0 IDC(A) 2.5 3.0 3.5 SQ08052R2ML□ 60.0 2.5 50.0 2.0 △ T(℃ ) L(uH) 40.0 1.5 1.0 30.0 20.0 10.0 0.5 0.0 0.0 0.0 1.0 2.0 3.0 4.0 IDC(A) 5.0 6.0 7.0 SQ0805100ML□ 70.0 12.0 60.0 10.0 50.0 △ T(℃ ) L(uH) 8.0 6.0 40.0 30.0 4.0 20.0 2.0 10.0 0.0 0.0 0.0 0.4 0.8 1.2 1.6 2.0 IDC(A) 2.4 2.8 3.2 60.0 60.0 50.0 50.0 40.0 40.0 △ T(℃ ) L(uH) SQ0805470ML□ 30.0 20.0 20.0 10.0 10.0 0.0 0.0 0.0 AR-001C 30.0 0.2 0.4 0.6 0.8 1.0 IDC(A) 1.2 1.4 1.6 0.0 0.2 0.4 0.6 0.8 IDC(A) 1.0 1.2 1.4 1.6 3 SPECIFICATION FOR APPROVAL REF. : SQ0805□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-B PAGE 4 Ⅵ﹒Packaging information： ( 1 ) Configuration T Cover tape A B N 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D P:12 m/m 4 m/m End Start 100 100 Leader no component 200 m/m min. 100 100 100 Trailer No component 400 m/m Min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 13 - 16 330 B 21±0.8 C 13±0.5 D G N T 16 18 +0 50 -0 22.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Code B AR-001C Q'TY (pcs) G.W. (gw) 1,000 1000 Outer : Carton Style 13 - 16 Q'TY (pcs) 6,000 G.W. (Kg) 7.5 Size (cm) 38 x 37 x 22 SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. SQ0805□□□□L□-□□□ 20140610-B PAGE 5 Ⅶ﹒Reliability test： Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.External Visual MIL-STD-883 Method 2009 constructions, marking and 6.Physical Dimensions JESD22 Method JB-100 Inspect product workmanship. Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Verify physical dimensions to the applicable product detail specification. Per product specification standard 7.Resistance to solvents MIL-STD-202 Method 215 Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±10%. 8.Vibration Test MIL-STD-202 Method 204 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 1.Highest temperature： 250±5℃ 2.Time（temp.≧ 217℃）：60~150 Second. 3.IR reflow times：3 times. 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply double as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±10%. 13.Solderability Test J-STD-002 1.Baking in pre-testing： 155±5℃ / 16Hours±30 min. 2.Peak temperature：240±5℃ 3.Time（temp.≧217℃）：60~150 second. 4.IR reflow times：1 times. 14.Electrical Characteriazation User Spec. 1.Operating temperature：-40℃~125℃ 2.Room temperature：25℃. 15.Withstanding Voltage Test MIL-STD-202 Method 201 1.DC:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. AR-001C The terminal shall be at least 95% covered with fresh solder. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±10%. After test, inductors shall be no mechanical damage.