SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. Filter Coil NAME REV. Ⅰ﹒Configuration and dimensions： A Wψ E C B Ⅱ﹒Characteristics Of core material： Uiac：75 Bs ：14000 Gauss Temperature stability：±5 ---- 10% ( Gauss ) 15000 10000 5000 0 100 200 Ⅲ﹒Description： a﹒Ferrite toroidal core construction. b﹒Enamelled copper wire：F class c﹒Product weight：50.30 g（ref.）(TR3217) d﹒Moisture sensitivity Level 1 e﹒Products comply with RoHS' requirements f﹒Halogen free available Ⅳ﹒General specification： a﹒Storage temp.：-40℃ ---- +125℃ b﹒Operating temp.：-40℃ ---- +125℃ ( Temp. rise included. ) AR-001C 300 TR□□□□□□□□L□-□□□ 20140306-E PAGE 1 SPECIFICATION FOR APPROVAL REF. : PROD. NAME TR□□□□□□□□L□-□□□ ABC'S DWG NO. Filter Coil REV. 20140306-E PAGE 2 Ⅴ﹒Electrical characteristics： DWG No. Inductance ( μH ) min. TR0806100YL□-□□□ 10 ( mΩ ) max. 45 TR1307250YL□-□□□ 25 TR1711260YL□-□□□ DC Restistance Rated Current (A) Dimensions ( m/m ) B E C max. max. 6.0 20.0±5 3.0 1 A max. 8.5 85 2 13.5 7.5 20.0±5 3.0 0.4ψ 26 55 2 17.0 11.0 25.0±5 3.0 0.6ψ TR1711460YL□-□□□ 46 70 2 17.0 11.0 25.0±5 3.0 0.6ψ TR1711720YL□-□□□ 72 85 2 17.0 11.0 25.0±5 3.0 0.6ψ TR1714450YL□-□□□ 45 75 2 17.0 14.0 25.0±5 3.0 0.6ψ TR1714800YL□-□□□ 80 85 2 17.0 14.0 25.0±5 3.0 0.6ψ TR1714131YL□-□□□ 125 100 2 17.0 14.0 25.0±5 3.0 0.6ψ TR2313400YL□-□□□ 40 40 3 23.0 13.0 25.0±5 3.0 0.8ψ TR2313720YL□-□□□ 72 50 3 23.0 13.0 25.0±5 3.0 0.8ψ TR2313111YL□-□□□ 110 70 3 23.0 13.0 25.0±5 3.0 0.8ψ TR2616350YL□-□□□ 35 30 5 26.0 16.0 25.0±5 3.0 1.0ψ TR2616640YL□-□□□ 64 40 5 26.0 16.0 25.0±5 3.0 1.0ψ TR2616101YL□-□□□ 100 50 5 26.0 16.0 25.0±5 3.0 1.0ψ TR3217450YL□-□□□ 45 40 5 32.0 17.0 25.0±3 3.0 1.0ψ TR3217900YL□-□□□ 90 50 5 32.0 17.0 25.0±3 3.0 1.0ψ TR3217141YL□-□□□ 140 70 5 32.0 17.0 25.0±3 3.0 1.0ψ 1). Rated current base on temp. rise ：40℃ max. 2). Electrical specifications at 25℃ AR-001C Wψ 0.4ψ SPECIFICATION FOR APPROVAL REF. : TR□□□□□□□□L□-□□□ ABC'S DWG NO. PROD. Filter Coil NAME REV. PAGE 20140306-E 3 Ⅵ﹒Curve： TR0806-L & TR1307-L TR1711-L 35 30 140 120 TR1307 100 L ( uH ) L ( uH ) 25 20 15 10 720Y 80 460Y 60 TR0806 40 260Y 30 5 20 10 0 10 20 50 102 2 5 DC Current (mA) 103 0 2 5 10 TR1714-L 20 50 102 2 5 DC Current (mA) 103 2 5 103 2 5 103 2 5 TR2313-L 180 140 111Y 131Y 160 120 140 100 L ( uH ) L ( uH ) 120 800Y 100 80 720Y 80 60 60 450Y 400Y 40 40 30 20 20 10 0 10 20 50 102 2 5 DC Current (mA) 103 0 2 5 10 20 50 102 2 5 DC Current (mA) TR2616-L 260 TR3217-L 180 240 101Y 160 220 140 640Y 180 L ( uH ) 120 L ( uH ) 141Y 200 100 80 160 140 900Y 120 60 350Y 100 40 80 60 20 0 10 20 50 102 2 5 DC Current (mA) 103 2 5 450Y 0 10 20 50 102 2 5 DC Current (mA) LCR Meter：Model HP4274A 0.1 V / 1 KHz AR-001C SPECIFICATION FOR APPROVAL REF. : TR□□□□□□□□L□-□□□ ABC'S DWG NO. PROD. Filter Coil NAME REV. 20140306-E PAGE 4 Ⅶ﹒Dwging number expression： T R Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements Appendix code 2：Package Information Code Inner package Box A AR-001C Tray Inner packge Q'TY Remark 500 pcs TR0806 1170 pcs TR1307 81 pcs TR1711 345 pcs TR1714 340 pcs TR2313 30 pcs TR2616 90 pcs TR3217 SPECIFICATION FOR APPROVAL REF. : PROD. ABC'S DWG NO. Filter Coil NAME REV. TR□□□□□□□□L□-□□□ 20140306-E PAGE 5 Ⅷ﹒Reliability test： Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.External Visual MIL-STD-883 Method 2009 constructions, marking and 6.Physical Dimensions JESD22 Method JB-100 Inspect product workmanship. 7.Resistance to solvents MIL-STD-202 Method 215 Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Verify physical dimensions to the applicable product detail specification. Per product specification standard Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±20%. 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.Method：Dip 2.Temperature：260±5 3.Time（temp.≧ 260℃）：10 second. 4.Number of times：3 times. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 8.Vibration Test MIL-STD-202 Method 204 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 13.Solderability Test J-STD-002 Dip pads in flux then dip in solder pot at 240±5 for 5 senconds. Teminals area must have 95% min. Solder coverage. 14.Electrical Characteriazation User Spec. 1.Operating temperature：-40℃~125℃ 2.Room temperature：25℃. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 15.Withstanding Voltage Test MIL-STD-202 Method 201 1.DC:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. AR-001C 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply double as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±20%. 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±20%. After test, inductors shall be no mechanical damage.