Data Sheet SML-P11 Series PICOLEDTM-eco 1006(0402) 1.0×0.6mm(t=0.2mm) Features ・Ultra compact, thin size 1.0×0.6mm,t=0.2mm ・Accomplishes low power consuming application specification assured at IF=1mA Color Type V U D Y M Specifications PICOLEDTM-eco Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Min.*2 Typ. Max.*2 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Part No. ■ SML-P11VT(R) Red ■ SML-P11UT(R) ■ SML-P11DT(R) AIGaInP Orange on GaAs ■ SML-P11YT(R) Yellow ■ SML-P11MT(R) Yellowish Green 1.8 50 52 20 100*1 5 -40 to +85 -40 to +100 1 10 4 1.9 54 621 626 631 1.6 4.0 616 621 626 2.5 6.3 602 605 608 583 586 589 566 569 1 4.0 572 1.0 7.3 1 7.6 2.1 ＊1:Duty1/10, 1kHz ＊2:Reference Dimensions Recommended Solder Pattern Viewing Angle 1 (deg) ANGULAR DISPLACEMENT SCANNING ANGLE (deg) 0.6 X 20° Y 0° 10° 10° 20° 30° 30° 40° 40° 50° 0.6 50° 60° 60° 70° 70° 80° 90° 100 50 Cathode Index 0.5 0.4 0 90° 100 50 RELATIVEINTENSITY INTENSITY (%) (%) RELATIVE 0.6 0.2 (0.08) +0.05 -0.02 80° 0.5 SCANNINGANGLE ANGLE (deg)(deg) SCANNING 4-R0.15 20° Y’ 0.52 X’ 10° 0° 30° 10° 20° 30° 40° 40° 50° 50° 60° 60° 0.4 Terminal 70° 70° 80° 80° 90° 100 Tolerance : ±0.05 (unit : mm) （unit : mm） 50 0 50 RELATIVEINTENSITY INTENSITY (%) RELATIVE (%) 90° 100 ＊ PICOLED is ROHM's pending trademark. TM www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/3 2012.12 - Rev.A SML-P11 series Electrical Characteristics Curves Forward Current-Forward Voltage Ta=25°C FORWARD CURRENT : IF (mA) 100.0 ■ ■ ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 10.0 1.0 0.1 1.5 2.5 2.0 FORWARD VOLTAGE : VF (V) Luminous Intensity-Atmosphere Temperature IF=20mA RELATIVE LUMINOUS INTENSITY 1.6 ■ 1.4 ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE : Ta (°C) Luminous Intensity-Forward Current Ta=25°C RELATIVE LUMINOUS INTENSITY 1.2 ■ ■ 1.0 ■ ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 0.8 0.6 0.4 0.2 0 0 5 10 15 20 FORWARD CURRENT : IF (mA) Derating MAXIMUM FORWARD CURRENT : (mA) ■ 30 ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE : Ta (°C) www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 2/3 2012.12 - Rev.A SML-P11 series Rank Reference of Brightness Red (V, U) Luminous A B C D E F G H J K Intensity Package size(mm) Height(mm) (mcd) 0.063 to 0.1 0.1 to 0.16 0.16 to 0.25 0.25 to 0.4 0.4 to 0.63 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 Mini-mold 1006 Chip LEDs L M 6.3 to 10 10 to 16 (Ta=25˚C, IF＝1mA) N P 16 to 25 SML-P11UT Orange (D) Luminous A B C D E F G H J K Intensity Package size(mm) Height(mm) (mcd) 0.063 to 0.1 0.1 to 0.16 0.16 to 0.25 0.25 to 0.4 0.4 to 0.63 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 Mini-mold Chip LEDs 1006 0.2 L M 6.3 to 10 10 to 16 (Ta=25˚C, IF＝1mA) N P 16 to 25 Luminous A B C D E F G H J K Intensity Package size(mm) Height(mm) (mcd) 0.063 to 0.1 0.1 to 0.16 0.16 to 0.25 0.25 to 0.4 0.4 to 0.63 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 0.2 L M 6.3 to 10 10 to 16 (Ta=25˚C, IF＝1mA) N P 16 to 25 25 to 40 SML-P11YT Green (M) Luminous A B C D E F G H J K Intensity Package size(mm) Height(mm) (mcd) 0.063 to 0.1 0.1 to 0.16 0.16 to 0.25 0.25 to 0.4 0.4 to 0.63 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 Mini-mold Chip LEDs 1006 25 to 40 SML-P11DT Yellow (Y) Mini-mold Chip LEDs 1006 25 to 40 SML-P11VT 0.2 0.2 L M 6.3 to 10 10 to 16 (Ta=25˚C, IF＝1mA) N P 16 to 25 25 to 40 SML-P11MT Part No. Construction Special Code S M L P 1 1 Series name Package name Chip Type M T Emitting Resin Color Color T 8 6 R H Rank sign (Brightness Rank)∗ Taping Specifications 1 Low Current Type V Red:630nm T Transparent Colorless T86 Cathode at sprocket hole side 2 High Brightness Type U Red:620nm W MilkyWhite T87 Reverse of T86 D Orange:605nm Y Yellow:587(590)nm M Yellowish-Green:572nm 1 For white LED, cathode at sprocket hole side ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 3/3 2012.12 - Rev.A Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1102A