Point of Use Water Coolers AP-3 Range of Filters 3M Water Filtration - Foodservice The challenge Provide the best possible quality water to enhance your brand, protect your machine and increase your profits. The solution 3M Filtration filter systems provide ease of use and market leading protection for both your product and machine. Features Benefits • Sanitary Quick Change cartridge • For clean and easy change-out • High flow, high capacity • Meets requirements of high flow machines • Built in valve-in-head • Cartridge change-out without shutting off the water supply • Proprietary graded carbon block • No activation or extended flush for ease of installation • A choice of different media • To: - Reduce chlorine taste and odour - Reduce sediment down to 1.0, 0.5 or 0.2 micron - Inhibit scale formation in hot water applications - Reduce 99.95% of Protozoan cysts – Cryptosporidium and Giardia - Remove >99.99% of bacteria • FDA compliant materials • Can be used in food and beverage applications • Integral mounting bracket on head • For easy installation • Empty cartridge available • Enables simple sanitisation procedure Point of Use Water Coolers AP3-1102-M/AP3-1101 h h 10 cm h h h 7.8 cm h h 7.8 cm h h AP3-765/765-S/762-M 38.5 cm 30 cm h h h h h h 4 cm 4 cm h h h 4 cm 4cm MIN. DISTANCE REQUIRED FOR CARTRIDGE REMOVAL AP3 Model Range & Technical Specification Reduction Claims Model / system system Part No. Replacement cartridge Part No. Chlorine Taste and odour Sediment Reduction Cyst Reduction Scale Inhibition Sanitisation Bacteria Removal* AP3-765 70020019462 AP3-C765 70020019827 • • • AP3-765-S 70020019470 AP3-C765-S 70020019835 • • • AP3-762-M 70020020668 AP3-C762-M 70020020643 • • • • AP3-1102-M 70020020676 AP3-C1102-M 70020020650 • • • • AP3-1101 70020020684 AP3-C1101 70020115690 • • AP3-E 70020019843 • Capacity (litres) Flow Rate (lpm) Temp (°C) Micron Rating 7,600 2.8 4.4-38 0.5 7,600 2.8 4.4-38 0.5 7,600 2.8 4.4-38 0.2 11,000 3.8 4.4-38 0.2 11,000 3.8 4.4-38 1 • * Removes >99.9999999% (log 8) of bacteria and cyst Note: 3/8” Push Fit Fittings Included For the filtration of cold water only. This product is for commercial use only. All materials are FDA compliant with CFR title 21. This is a mechanical, chemical filter. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment No. 070595-CT-001. In line with current good practice and EPDWA guidelines, filter cartridges should be changed every 6 months. 3M Water Filtration AP3 range of products are tested in accordance with NSF/ANSI Standard 42 for Particulate Reduction and Chlorine Taste and Odour and, where stated, NSF/ANSI Standard 53for Cyst & Turbidity Reduction. Maximum Operating Temperature is: 38°C Maximum Operating Pressure is: 125 psi Water Filtration 3M United Kingdom PLC 3M Ireland 3M Centre, Cain Road, Bracknell Berkshire RG12 8HT Tel: +44 (0) 1344 858000 Fax: +44 (0) 1344 858559 www.3m.com/waterfiltration 3M House, Adelphi Centre Upper Georges Street Dun Laoghaire Co. Dublin, Ireland Tel: +353 1 280 3555 Fax: +353 1 280 3509 For more contact addresses visit our website www. cuno.com/international or www.3m.eu/filtration. Data may be subject to change without further notice. Please recycle. © 3M 2008. All rights reserved. LITFSEUR0026 - 0508