3M Cubitron II Bonded Abrasive Grinding Wheels TM TM BORN TO GRIND. IT’S GRINDING REINVENTED. GRINDING REINVENTED 3M™ Cubitron™ II bonded abrasive grinding wheels are revolutionising the grinding process. They’re faster cutting and longer lasting than conventional grinding wheels. Conventional ceramic abrasive grain is irregular With 3M precision-shaped grain technology in shape. Instead of a clean, machining action, that transforms the process of grinding heat build up, slower cutting and shorter life. the grain “plows” through the metal, causing metal, Cubitron II abrasives: • Cut faster • Stay sharp longer • Require less pressure • Potentially reduce operator fatigue • Increase productivity 3M precision-shaped grain in Cubitron II grinding wheels continuously fracture to form sharp points and edges – slicing cleaner and faster, staying cooler and lasting many times longer. 3M™ CUBITRON™ ll DEPRESSED CENTRE GRINDING WHEELS Cubitron II depressed centre grinding wheels produce very high cut rates on a wide variety of metals. They are used for heavy weld removal and many other grinding applications. ACCUMULATED MATERIAL REMOVAL 500 450 350 3M Cubitron II 3M Green Corps Comp A Comp B Material Removed (g) 400 300 250 200 150 As the chart shows, after ten minutes of grinding, Cubitron II grinding wheels tripled the output of its competitors. 100 50 0 1 2 3 4 5 6 7 8 9 10 Time (min) 3M™ CUBITRON™ II DEPRESSED CENTRE GRINDING WHEEL - T27 Performane Characteristics Dimensions (mm) Ordering Code Max. RPM Carton Qty 100 x 6 x 16 60410011625 15,300 20 • 3M precision-shaped grain for ultra fast cut and long life 115 x 7 x 22.23 XC991060820 13,300 20 • Specially formulated for use on stainless and mild steel 125 x 7 x 22.23 XC991060846 12,250 20 • Cool cutting for a higher quality and faster cut 180 x 7 x 22.23 XC991060887 8,500 20 230 x 7 x 22.23 XC991060903 6,600 20 • Premium Performance • Fast, cool cutting helps extend the life of the tool FOR MORE INFORMATION VISIT www.3MCubitron2.com/au Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Australia Pty Ltd Abrasive Systems Division Bldg A, 1 Rivett Road North Ryde NSW 2113 Australia Phone: 136 136 Fax: (02) 9498 9247 Email: [email protected] www.3m.com.au 3M and Cubitron are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates.