6804-EMD_HS Tubing Guide.indd

3
Heat Shrink Tubing Selection Guide
3M Heat Shrink Tubing Selection Guide
SHRINK TEMP.
(Min.)
SHRINK RATIO
DIELECTRIC
STRENGTH
(V/mil)
VOLUME
RESISTIVITY
(ohm-cm)
TENSILE STRENGTH
(PSI)
STANDARD SIZES
EXPANDED DIAMETER
OPERATING
TEMPERATURE
RANGE
MATERIAL/
TYPICAL
APPLICATIONS
PRODUCT
™
–55°C
to
+135°C
212°F
100°C
2:1
3/64"
to
4"
900
10 15
2400
–55°C
to
+135°C
212°F
100°C
2:1
3/64"
to
4"
900
10 15
2400
Single-Wall Polyolefin Tubing
Flexible Polyolefin General purpose flame retardant insulation
for UL, CSA and MIL-DTL-23053/5 applications; cable and component covering. Class 1 = opaque colors; Class 2 = clear.
FP-301VW Highly Flame-Retardant, Flexible Polyolefin Insulation
applications, flame-retardant applications requiring UL VW-1
and CSA OFT, fire-resistant wiring.
FP-301
VFP-876
Very Flexible Polyolefin Terminal insulation, low
shrink-temperature applications.
–55°C
to
+135°C
212°F
100°C
2:1
3/64"
to
2"
800
10 14
2100
SFTW-203
Very Flexible Polyolefin Shrink-fit jacketing and insulation
of flexible wire bundles and temperature-sensitive components.
–55°C
to
+135°C
212°F
100°C
3:1
1/16"
to
1 1/2"
700
10 15
2600
SFTW-202
GYS
Green and Yellow Striped, 2:1 very flexible polyolefin,
primarily used for ground wire identification.
–55°C
to
+135°C
212°F
100°C
2:1
1/8"
to
3/4"
700
10 14
2600
CP-221
Commercial Grade Polyolefin Terminal strip wire markers
and general purpose insulation.
–55°C
to
+125°C
250°F
121°C
2:1
3/64"
to
2"
550
10 14
1800
Adhesive-Lined, Polyolefin Tubing
MW
Multiple Wall Polyolefin Insulation, strain relief and sealing
of electrical connections, wire splices and components.
–55°C
to
+110°C
275°F
135°C
2.5:1
1/8"
to
1"
900
10 15
2200
EPS-200
Environmental Protection Sleeve Insulation, strain relief
and environmental protection of electrical wire bundles
and components.
Environmental Protection Sleeve Insulation, strain relief
and environmental protection for automotive and marine
wire bundles and splices.
–55°C
to
+110°C
250°F
121°C
2:1
1/8"
to
2"
800
10 14
2100
–55°C
to
+110°C
250°F
121°C
3:1
1/8"
to
1-1/2"
700
10 14
2100
Environmental Protection Sleeve Insulation, strain relief
and environmental protection for sealing voids in multiple
wire bundles for automotive and marine applications.
Semi-Rigid Multiple Wall Terminal Protection Sleeve
Insulation, strain relief and environmental protection. Uses
include the manufacture of heat shrink butt connectors,
ring terminals and fork terminals.
All-Weather, Heat-Shrinkable, Dual Wall, Polyolefin Tubing for
Automotive Wire Harnesses
–55°C
to
+110°C
250°F
121°C
4:1
.300"
to
.700"
700
10 14
1900
–55°C
to
+110°C
275°F
135°C
.183"
to
.330"
900
10 14
2500
–55°C
to
+110°C
250°F
121°C
4:1
4:1
.220"
to
.700"
500
1014
2450
1900
EPS-300
EPS-400
TMW
TES
SMS
Special Purpose Tubing
KYNAR®
Polyvinylidene Fluoride Heat-resistant transparent insulation
and marking for electronic and appliance applications.
–55°C
to
+175°C
347°F
175°C
2:1
3/64"
to
2"
900
10 14
5500
NST
Modified Neoprene Insulation and abrasion resistant covering
of wiring and cable harnesses. Oil resistant coverings.
–70°C
to
+121°C
275°F
135°C
2:1
1/8"
to
3"
800
10 12
2100
VTN-200
Fluoroelastomer Synthetic fuel and hydraulic oil resistant applications, high-temperature coverings.
–55°C
to
+200°C
347°F
175°C
2:1
1/8"
to
2"
500
10 12
2400
PSTH
Flexible Elastomeric Polyester Designed for harsh
operating conditions.
–55°C
to
+150°C
338°F
170°C
2:1
3/16"
to
2 1/2"
500
10 14
2200
Heavy-Duty Tubing
MDT
Medium-Duty Excellent abrasion, corrosion and environmental protection. Flame retardant.
–55°C
to
+110°C
250°F
121°C
3:1
.400"
to
4.30"
500
10 14
2400
HDT
Heavy-Duty Fabricated from specially formulated cross-linked polyolefin, assuring long-term environmental protection. Highly chemical,
abrasion and split resistant.
–55°C
to
+110°C
250°F
121°C
3:1
.300"
to
7.00"
500
10 14
2400
CCT
Adhesive-lined, 3:1 flexible polyolefin for sealing and insulating
CATV connections.
–55°C
to
+110°C
250°F
121°C
3:1
.400"
to
3.00"
500
10 14
2000
BBI
Bus Bar Tubing, Designed for insulating rectangular, square,
or round bus bar rated 5 kV through 35 kV.
–55°C
to
+110°C
250°F
121°C
2.38"
to
10.28"
550
10 13
2200
Technical information provided consists of typical product data and
should not be used for specification purposes. Unless otherwise noted,
all tests are performed at room temperature.
Kynar® Elf Atochem North America, Inc.
FUEL & OIL
RESISTANCE
SOLVENT RESISTANCE
RESISTANCE TO
ACIDS AND ALKALIS
3
Good
Exc.
Exc.
MIL-DTL-23053/5, Class 1, 2;
AMS-3636 & 3637; UL File
E-39100; CSA LR38227; ABS
400
+1, –10
1.5
Self-Extinguish meets
UL 224 VW-1 Test
Non-Corrosive
Good
3
Good
Exc.
Exc.
MIL-DTL-23053/5, Class 3;
UL File E-39100, VW-1;
CSA LR38227, OFT
450
5
1.3
Self-Extinguish meets
UL 224 All-Tubing
Flame Test
Non-Corrosive
Good
2
Good
Exc.
Exc.
MIL-R-46846, Type V;
UL File E-39100; CSA LR38227,
MIL-DTL-23053/5
400
5
1.29
Self-Extinguish
Non-Corrosive
Good
3
Good
Good
Exc.
MIL-DTL-23053/5*, Class 1;
UL File E-48398; CSA LR38227
400
5
1.29
Self-Extinguish
Non-Corrosive
Good
3
Good
Good
Exc.
MIL-DTL-23053/5, Class 1;
UL File E-48398; CSA LR38227
400
5
1.1
Self-Extinguish
Non-Corrosive
Good
4
Good
Good
Exc.
400
+1, –10
1.0
Non-Flame Retardant
Non-Corrosive
Good
7
Good
Good
Exc.
MIL-DTL-23053/4, Class 1;
AMS-3634; UL File E-157227
450
+1, –5
1.3
Self-Extinguish meets
UL 224 All-Tubing
Flame Test (jacket)
Non-Corrosive
Good
3
Good
Good
Exc.
MIL-DTL-23053/4, Class 2;
UL File E-39100
450
+1, –15
1.3
Self-Extinguish meets
UL 224 All-Tubing
Flame Test (jacket)
Non-Corrosive
Good
3
Good
Good
Exc.
MIL-DTL-23053/4, Class 3;
UL File E-157227; ABS
400
+1, –10
1.25
Self-Extinguish
Non-Corrosive
Good
7
Good
Good
Exc.
UL File E-157227
400
+1, –10
1.0
Non-Flame Retardant
Non-Corrosive
Good
7
Good
Good
Exc.
UL File E-157227
450
350
+0, -10
+0, -10
0.97
1.25
TES Non-Flame Retardant Non-Corrosive
SMS Self-Extinguish
Non-Corrosive
Good
Good
TES 5 Good
SMS 3 Good
Good
Good
Exc.
Exc.
ESB-M99D56-Ford
MS-DB56-Chrysler
350
+1, –10
1.7
Self-Extinguish meets
UL 224 VW-1 Test
Non-Corrosive
Exc.
10
Exc.
Exc.
Exc.
MIL-DTL-23053/18, Class 1; MIL-DTL23053/8; AMS-3632; UL File E-39100,
VW-1, E69751;CSA LR38227 OFT
500
+1, –10
1.3
Self-Extinguish
Non-Corrosive
Exc.
1
Exc.
Good
Exc.
MIL-R-46846, Type I, Class 1;
MIL-DTL-23053/1, Class 1, 2;
AMS-3623, SC-X-15112
450
+1, –10
1.7
Self-Extinguish
Non-Corrosive
Exc.
4
Exc.
Exc.
Exc.
MIL-R-46846, Type III, Class 1;
MIL-DTL-23053/13
350
+2, –8
1.6
Self-Extinguish
Non-Corrosive
Exc.
4
Exc.
Exc.
Exc.
SC-X15111C; meets the functional
requirements of MIL-DTL-23053/16
475
+1, –10
1.28
Self-Extinguish
Non-Corrosive
Good
8
Good
Good
Exc.
MIL-DTL-23053/15, Class 2; ABS
475
+1, –10
1.28
Self-Extinguish
Non-Corrosive
Good
9
Good
Good
Exc.
MIL-DTL-23053/15, Class 1; ABS
400
+1, –10
1.30
Self-Extinguish
Non-Corrosive
Good
8
Good
Good
Exc.
575
+0, –10
1.20
Self-Extinguish
Non-Corrosive
Good
8
Good
Good
Exc.
For your nearest 3M distributor, or to order, call 800 676-8381
APPLICABLE
SPECIFICATIONS
FLEXIBILITY
(See Note below)
Good
CORROSIVE
EFFECT
Self-Extinguish meets
Non-Corrosive
UL 224 All-Tubing
Flame Test (except clear)
FLAMMABILITY
1.3
SPECIFIC GRAVITY
5
LONGITUDINAL
CHANGE (+ %)
ABRASION
RESISTANCE
ULTIMATE ELONGATION
(%)
400
ASTM-D-257, 149, 150, 2303; IEC 216;
ANSI/IEEE Std C37.20
Note: The materials are rated on a scale of 1–10 for flexibility:
1 = most flexible and 10 = most rigid.
*Material characteristics only
Important Notice
Before using this product, you must
evaluate it and determine if it is suitable for
your intended application. You assume all
risks and liability associated with such use.
Warranty; Limited Remedy;
Limited Liability.
3M’s product warranty is stated in its
Product Literature available upon request.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is
defective within the warranty period stated
above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M
product or refund the purchase price of
the 3M product. Except where prohibited
by law, 3M will not be liable for any loss
or damage arising from this 3M product,
whether direct, indirect, special, incidental
or consequential regardless of the legal
theory asserted.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800 676 8381
Fax 800 828 9329
http://www.3M.com/electrical
40% Pre-consumer waste paper
10% Post-consumer waste paper
Litho in USA.
© 3M 2004 80-6109-4340-1B(1092.0)W