3M™ Speedglas™ 9100FX Air Welding Helmet Care

3M Personal Safety
3M Speedglas 9100FX Air
Welding Helmet
™
™
Care and Maintenance
To optimise the effective lifetime of your welding equipment and avoid the additional cost of replacement, regular maintenance is important.
Before Use
• Inspect inner and outer protection plates, visor
and filter glass. Replace if cracked, pitted or
scratched
• Ensure low battery indicator is not flashing
• Inspect headband. Replace if damaged
• Inspect helmet for cracks. Replace if
necessary
• Verify the sweatband is in place. Replace if
necessary
• Ensure face seal is in place and free from
splits and tears
• Confirm air duct tubing is undamaged
• Replace any accessories used as necessary
• Check that the sensors on the welding filter
are clean and uncovered
After Use
• Clean with cloth dampened with a mild
solution of detergent and luke warm water
• The face seal can be removed for additional
cleaning
• Store in a dry, clean area / locker away
from direct sunlight, high temperatures and
solvents
Ordering Consumables, Repair Parts and
Accessories
To request a quote or place an order for these
items, please contact your 3M Approved
Distributor.
Further Information and Advice
If you require additional guidance on the
Care and Maintenance of your 3M Welding
Equipment, please contact the Helpline or your
local 3M representative.
3M Health & Safety Helpline
Monday - Friday 9 to 5
0870 60 800 60 UK
1 800 320 500 IRELAND
3M™ Speedglas™ 9100FX Air Welding Helmet
Speedglas 9100 FX Air Welding Headtop for respiratory protection
3M™ Speedglas™ 9100FX Air Welding Helmet accessories and spare parts
Comfort sweatband, pkg of 3
9100 FX head cover small
9100 FX head cover large
Neck protection, black
Hood, black/grey
Magnifying lens 1.0
Magnifying lens 1.5
Magnifying lens 2.0
Magnifying lens 2.5
Battery, pkg of 2
Speedglas 9100V welding filter, variable shade 5, 8, 9-13
Speedglas 9100X welding filter, variable shade 5, 8, 9-13
Speedglas 9100XX welding filter, variable shade 5, 8, 9-13
9100 FX Visor plate x5
9100 FX Visor plate Anti Fog x5
Outer protection plate standard, pkg of 10
Outer protection plate extra scratch resistant, pkg of 10
Outer protection plate heat resistant pkg of 10
Inner protection plate for Speedglas 9100V fiter, pkg of 5 Plate marking 117x50
Inner protection plate for Speedglas 9100X, pkg of 5. Plate marking 117x61
Inner protection plate for Speedglas 9100XX, pkg of 5. Plate marking 117x77
Battery holder, pkg of 2
9100 FX SideWindow cover plate, 2 pairs
Speedglas 9100 headband including assembly parts
9100 FX Airduct assembly
Adaptor for 9100 FX Air Welding Helmet with Adflo Breathing tube
9100 FX Air Face Seal
Air Deflector for 9100 FX Air Welding Helmet
Pivot mechanism, left and right
Headband front part
Headband back part
9100 FX Front cover kit
9100 FX Welding Helmet without welding filter, headband, face seal and air-duct
9100 FX Air Welding Helmet without welding filter
9100 product carry bag
@3M_UK_Safety
3M Personal Safety Division
3M United Kingdom plc
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
Tel: 0870 60 800 60
www.3M.co.uk/Safety
3M Ireland Limited
The Iveagh Building
The Park
Carrickmines
Dublin 18
Tel: 1 800 320 500
17808
3M, Speedglas and Adflo are trademarks of 3M Company
Please recycle. Printed in UK.
© 3M 2014. All rights reserved.
REPLACE ALL DAMAGED PARTS IMMEDIATELY TO ENSURE
CORRECT LEVELS OF PROTECTION
For more information on all our products, call 3M Personal Safety Division on 0870 60 800 60 (UK) and 1800 320 500 (Ireland) or visit www.3M.co.uk/safety
CH9100FXAIRWCMP
To download this poster please visit:
www.3M.co.uk/maintenancepack or scan the QR code
3M Part No
54 28 00
16 80 15
16 90 06
16 90 07
16 90 10
16 91 00
17 10 20
17 10 21
17 10 22
17 10 23
42 20 00
50 00 05
50 00 15
50 00 25
52 30 00
52 30 01
52 60 00
52 70 00
52 70 70
52 80 05
52 80 15
52 80 25
53 10 00
53 20 16
53 30 00
53 35 00
53 35 05
53 40 00
53 50 00
53 60 00
53 61 00
53 62 00
54 05 00
54 18 90
54 28 00
79 01 01
Similar pages