AH955 - Faraday Technology

AH995
FULLY BUFFER HYBRID LOW PASS FILTER
The AH995 has been designed for use in D1/D5 oversampled systems. Interfacing to the system is
simplified with high input and low output impedance op-amp buffer stages.
Passband Shape
Flat
Insertion Loss at 100 kHz
0 dB + 0.1 dB
End Of Passband
7.67 MHz
Passband Amplitude Ripple wrt 100 kHz
+ 0.05 dB max
Start Of Stopband
26.5 MHz
Stopband Attenuation wrt 100 kHz
40 dB min
Group Delay Ripple wrt 200 kHz
+ 3 ns max to 7.67 MHz
Delay Time at 200 kHz
33 ns + 3 ns
Typical Current
8 mA (4 mA per rail at + 5 v)
Input Impedance
2 MΩ typical
Package
DR00037A
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA063.DOC
Page 1 of 2
Jun-99(A)
PACKAGE DETAIL
Faraday Technology Ltd.
Croft Road Industrial Estate,
Newcastle, Staffordshire
ST5 0QZ. England.
FARA063.DOC
Tel:
Fax:
Email:
Web site:
Page 2 of 2
+ 44 (0)1782 661501
+ 44 (0)1782 630101
sales@faradaytech.co.uk
http://www.faradaytech.co.uk
Jun-99(A)