ACE507C

ACE507C
200mA Low Consumption Linear Regulator
Description
ACE507C series is a group of positive voltage output, low power consumption, low dropout voltage,
three terminal regulator. It can provide 200mA output current when input / output voltage differential drops
to 430mVVout=2.8V), The very low power consumption of ACE507C(Iq=1.0uA)can greatly improve
natural life of batteries.
ACE507C can provide output value in the range of 1.1V~5.5V in 0.1V steps. It also can customized on
command.
ACE507C includes high accuracy voltage reference, error amplifier, current limit circuit and output driver
module.
ACE507C has well load transient response and good temperature characteristic, And it uses trimming
technique to guarantee output voltage accuracy within±2%.
Features









Low Power Consumption: 1.0uA (Typ)
Maximum Output Current: 200mA
Small Dropout Voltage
210mV@100mA (Vout=2.8V)
430mV@200mA (Vout=2.8V)
Input Voltage Range: 1.5V~6V
Output Voltage Range: 1.1V~5.5V (customized on command in 0.1V steps)
High Accurate: ±2% (±1% customized)e
Output Current Limit
Application



Battery Powered equipment
Power Management of MP3. PDA. DSC. Mouse. PS2 Games
Reference Voltage Source Regulation after Switching Power
Absolute Maximum Ratings
Parameter
Symbol
Max
Unit
Input supply voltage
Power Dissipation
SOT-23-3L
TSOT-23-3
SOT-89-3
TO-92
Junction temperature
VIN
8
V
TJ
250
250
500
500
125
Storage temperature
TS
Ambient Temperature
TA
mW
O
C
- 45 to 150
O
C
-40 ~85
O
C
Note: Exceed these limits to damage to the device.
Exposure to absolute maximum rating conditions may affect device reliability.
VER 1.4
1
ACE507C
200mA Low Consumption Linear Regulator
Packaging Type
SOT-23-3L
TSOT-23-3
SOT-89-3
TO-92
3
1
2
1
2
3
123
SOT-23-3L/TSOT-23-3 SOT-89-3 TO-92 Description
Function
2
3
3
VOUT
Output pin
3
2
2
VDD
Input Pin
1
1
1
VSS
Ground Pin
Ordering information
ACE507C XX XX + H
Halogen - free
Pb - free
BM : SOT-23-3L
BMS : TSOT-23-3
AM : SOT-89-3
EP : TO-92
Output Voltage:1.1V/1.5V…..5.5V
Block Diagram
Vin
Vout
GND
VER 1.4
2
ACE507C
200mA Low Consumption Linear Regulator
Recommended Work Conditions
Item
Min Max Unit
Input Voltage Range
6
V
85
℃
Ambient Temperature
-40
Electrical Characteristics
(Test Conditions: Cin=1uF, Cout=1uF,TA=25℃, unless otherwise specified.)
Parameter
Symbol
Input Voltage
VIN
Output Voltage
VOUT
Maximum Output
Current
Input-Output
Voltage
Differential
Min
Typ
Vout*
0.98
IOUT(Max.)
Dropout
Voltage
Line Regulation
ΔVOUT /
ΔVIN•VOUT
Load Regulation
ΔVOUT
Quiescent
Current
Output Voltage
Temperature
Coefficient
Conditions
VIN-VOUT=1V
IOUT=100
mA
Max
Units
6
Vout*
1.02
V
200
V
mA
Vout≦1.8V
600
1000
Vout≧1.8V
300
600
0.2
0.3
%/V
20
40
mV
5.0
uA
IOUT=10mA
1.5V≦VIN≦8A
VIN=Set Vout+1V
1mA≦IOUT≦100mA
Iq
VIN=Set Vout+1V
1.0
ΔVOUT /
ΔT•VOUT
IOUT=10mA
100
mV
ppm/℃
Typical Application Circuit
ACE507C
Vin
Vin
Vout
Vout
GND
1uF
Cin
1uF
Cout
Note 1. Input capacitor (Cin=1uF) is recommended in all application circuit. Tantalum capacitor is recommended.
2. Output capacitor (Cout=1uF) is recommended in all application to assure the stability of circuit. Tantalum capacitor is
recommended.
VER 1.4
3
ACE507C
200mA Low Consumption Linear Regulator
Explanation:
ACE507C is a series of low dropout voltage and low power consumption three pins regulator. Its
application circuit is very simple, which only needs two outside capacitors. It is composed of these
modules: high accuracy voltage reference, current limit circuit, error amplifier, output driver and power
transistor.
Current Limit module can keep chip and power system away from danger when load current is more
than 200mA.
ACE507C uses trimming technique to assure the accuracy of output value within±2%, at the same time,
temperature compensated is elaborately considered in this chip, which makes ACE507C’s temperature
coefficient within 100ppm/℃.
Typical Performance Characteristics
1.Load regulation
Iout(mA)
3.Dropout Voltage
Iout(mA)
2. Line regulation
Vin(V)
4.PSRR
Freq(Hz)
VER 1.4
4
ACE507C
200mA Low Consumption Linear Regulator
5.Iq (Vout=2.8V)
Vin(V)
7.Line transient response
Cin=Cout=1uF Iout=10mA Vout=2.8V
6.Current limit
Iout (mA)
8.Load transient response
Cin=Cout=1uF Vin=4V Vout=2.8V
9.Start up
VER 1.4
5
ACE507C
200mA Low Consumption Linear Regulator
Packing Information
SOT-23-3L
TSOT-23-3
VER 1.4
6
ACE507C
200mA Low Consumption Linear Regulator
Packing Information
SOT-89-3
VER 1.4
7
ACE507C
200mA Low Consumption Linear Regulator
Packing Information
TO-92
VER 1.4
8
ACE507C
200mA Low Consumption Linear Regulator
Notes
ACE does not assume any responsibility for use as critical components in life support devices or systems
without the express written approval of the president and general counsel of ACE Electronics Co., LTD.
As sued herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and shoes failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
ACE Technology Co., LTD.
http://www.ace-ele.com/
VER 1.4
9