ACE522 36V Input Linear Regulator Description ACE522 is a three-terminal positive regulator with an output voltage of 5.0V and output current up to 150mA. The device features a typical output tolerance of ±3%. And its input voltage can stand a voltage as high as 36V. ACE522 includes high accuracy voltage reference, error amplifier, TSD circuit and output driver module.ACE522 offers thermal shut down functions to assure the stability of chip and power system. ACE522 is available in SOT89-3, TO-92 and TO-220 power packages. Features Maximum output current up to 150mA Output voltage tolerances of ±3% over the temperature range Internal thermal over-temperature protection High input voltage (up to 36V) Low Power Consumption:100uA (Typ.) No external components Application Battery Powered equipment Communication equipment Audio/Video equipment Typical Application Note:Input capacitor (C1=0.33uF) and Output capacitor (C2=0.1uF) are recommended in all application circuit. Tantalum capacitor is recommended. VER 1.1 1 ACE522 36V Input Linear Regulator Electrical Characteristics Line Regulation Absolute Maximum Ratings Parameter Value Unit Max Input Voltage 40 V Max Output Current 150 mA Operating Junction Temperature(Tj) 150 O C Ambient Temperature(Ta) Power Dissipation TO-92 TO-220 SOT-89-3 Storage Temperature(Ts) -40 OC–85 OC O C 0.5 1.0 0.5 O -40 C–150 OC Lead Temperature & Time O 260 C,10s W O C O C Note: Exceed these limits to damage to the device. Exposure to absolute maximum rating conditions may affect device reliability. VER 1.1 2 ACE522 36V Input Linear Regulator Packaging Type SOT-89-3 1 2 TO-92 TO-220 3 1 SOT-89-3(A) SOT-89-3(B) 2 3 1 2 3 TO-92 TO-220 Description 1 2 2 1 GND 3 1 1 2 Vout 2 3 3 3 Vin Ordering information ACE522 XX XX + H Halogen - free Pb - free AMA: SOT-89-3(A) AMB: SOT-89-3(B) EP : TO-92 ZM : TO-220 Output Voltage：3.3V / 5V Recommended Work Conditions Item Min Input Voltage Range Operating Junction Temperature(Tj) -20 Max Unit 36 V +85 ℃ VER 1.1 3 ACE522 36V Input Linear Regulator Electrical Characteristics (Test Conditions：Cin=0.33uF, Cout=0.1uF,TA=25℃, Unless otherwise specified) Parameter Symbol Input Voltage VIN Output Voltage VOUT 1mA≤Iout≤40mA 7V≤Vin≤30V 4.85 IOUT(Max.) Vin-Vout=1.5V 150 ΔVOUT 7V≤Vin≤30V 0.2 0.3 mV Load Regulation ΔVOUT Iq 20 0.1 10 40 0.15 20 mV Quiescent Current 1mA≤Iout≤100mA VIN-Vout=1.25V ADJ version Vin=6.5V, 25℃≤ Temp ≤85℃ ±100 ppm Maximum Output Current Line Regulation Temperature coefficient Over Temperature Procetion Thermal Resistor ΔV/ΔT Conditions TSD Vin=6.5V, Iout=1mA θJC SOT89-3 TO-92 TO-220 Min Typ 5.0 Max Units 36 V 5.15 V mA uA ℃ 150 20 10 4.5 ℃/W Block Diagram VER 1.1 4 ACE522 36V Input Linear Regulator Explanation ACE522 is a series of low dropout voltage and low power consumption regulator. Its application circuit is very simple, which only needs two outside capacitors. We have to take heat dissipation into great consideration when voltage of input is high. Because in such cases, the power dissipation consumed by ACE522 is very large. ACE522 uses SOT-89-3 package type and its thermal resistance is about 20°C/W. And the copper area of application board can affect the total thermal resistance. If copper area is 5cm*5cm (two sides), the resistance is about 30°C/W. So the total thermal resistance is about 20°C/W + 30°C/W. We can decrease total thermal resistance by increasing copper area in application board. When there is no good heat dissipation copper are in PCB, the total thermal resistance will be as high as 120°C/W, then the power dissipation of ACE522 could allow on itself is less than 1W. And furthermore, ACE522 will work at junction temperature higher than 125°C under such condition and no lifetime is guaranteed. Typical Performance Characteristics VER 1.1 5 ACE522 36V Input Linear Regulator Packing Information SOT-89-3 VER 1.1 6 ACE522 36V Input Linear Regulator Packing Information TO-92 VER 1.1 7 ACE522 36V Input Linear Regulator Packing Information TO-220 VER 1.1 8 ACE522 36V Input Linear Regulator Notes ACE does not assume any responsibility for use as critical components in life support devices or systems without the express written approval of the president and general counsel of ACE Electronics Co., LTD. As sued herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and shoes failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ACE Technology Co., LTD. http://www.ace-ele.com/ VER 1.1 9