SWITCHES Stainless Steel Illuminated Vandal Resistant FRONT PANEL MOUNTING ᔢ ᔢ ᔢ ᔢ ᔢ MPI001 Sealed to IP66 Dot Illuminated 22mm diameter S.P. Push to Make 50mA, 24V dc contact rating Red, Green, Amber, Blue, White or Dual Colour Illumination ᔢ Bright Daylight LEDs ᔢ Separate LED Terminals Dual Colour LED Wiring LED terminals marked + and Switch terminals unmarked Dual Colour LED Configuration /D1 – D1 R2 – Specification MPI001/Termination/Colour Terminations: /28 (2.8mm tabs), /Term (screw terminals) Switching: S.P. Push to make, tactile Max. Switch Rating: 50mA, 24V d.c. LEDs (ratings @ 20mA) Colours Luminous Intensity Forward Voltage* Forward Current Part No. + D2 /D4 <100mΩ Insulation Resistance: >103 MΩ Dielectric Strength: Contact to Panel >2.0kV Contact to Contact 1500V Operating Temp. Range: –30˚C to +70˚C + – Red Blue /D5 Red / Green Red Green Amber Blue White 900mcd 2500mcd 900mcd 1500mcd 900mcd 2500mcd 5000mcd 1.85V 3.5V 2.3V 3.5V 3.6V 2.05V 3.6V 20mA 20mA 20mA 20mA 20mA 20mA /RD /GN /AM /BL /WH /D1 *An appropriate resistor must be series connected by the user Contact Resistance: – Red Green + R1 + + Green – Blue Red / Blue 2000mcd 850mcd 2.0V 3.6V 20mA /D4 Blue / Green 2000mcd 4000mcd 3.6V 3.6V 20mA /D5 Operations Mechanical: Electrical: 750,000 (min) 35,000 (min) Operating Pressure: 12N Rear Nut Fixing Torque: 0.57Nm Materials Switch assembly: Tags: Terminals: Switch Body & Button: Lens and Lens Body: O ring: Internal seal: Contact Plate: UL94V-0 rated Polyamide (Nylon) Copper Alloy Copper Alloy Stainless Steel Polycarbonate Nitrile Silicone Gold Plated SWITCHES Sealing (Front of panel only): Protection Classification: IP66 EN60529 1992 ESD Handling precautions must be taken RoHS www.bulgin.co.uk Compliant 183 SWITCHES Stainless Steel Illuminated Vandal Resistant FRONT PANEL MOUNTING ᔢ ᔢ ᔢ ᔢ ᔢ MPI002 Sealed to IP66 Ring Illuminated 22mm diameter S.P. Push to Make 50mA, 24V dc contact rating Red, Green, Amber, Blue, White or Dual Colour Illumination ᔢ Bright Daylight LEDs ᔢ Separate LED Terminals Dual Colour LED Wiring LED terminals marked + and Switch terminals unmarked Dual Colour LED Configuration /D1 – D1 R2 – Specification MPI002/Termination/Colour Terminations: /28 (2.8mm tabs), /Term (screw terminals) Switching: S.P. Push to make, tactile Max. Switch Rating: 50mA, 24V d.c. LEDs (ratings @ 20mA) Colours Luminous Intensity Forward Voltage* Forward Current Part No. + D2 /D4 <100mΩ Insulation Resistance: >103 MΩ. Dielectric Strength: Contact to Panel >2.0kV Contact to Contact 1500V Operating Temp. Range: –30˚C to +70˚C – + Red – Blue /D5 Red / Green Red Green Amber Blue White 900mcd 2500mcd 900mcd 1500mcd 900mcd 2500mcd 5000mcd 1.85V 3.5V 2.3V 3.5V 3.6V 2.05V 3.6V 20mA 20mA 20mA 20mA 20mA 20mA /RD /GN /AM /BL /WH /D1 *An appropriate resistor must be series connected by the user Contact Resistance: Red Green + R1 + + Blue – Green Red / Blue 2000mcd 850mcd 2.0V 3.6V 20mA /D4 Blue / Green 2000mcd 4000mcd 3.6V 3.6V 20mA /D5 SWITCHES Sealing (Front of panel only): Protection Classification: IP66 EN60529 1992 Operations Mechanical: Electrical: 750,000 (min) 35,000 (min) Operating Pressure: 12N Rear Nut Fixing Torque: 0.57Nm Materials Switch assembly: Tags: Terminals: Switch Body & Button: Lens and Lens Body: O ring: Internal seal: Contact Plate: UL94V-0 rated Polyamide (Nylon) Copper Alloy Copper Alloy Stainless Steel Polycarbonate Nitrile Silicone Gold Plated ESD Handling precautions must be taken RoHS Compliant 184 www.bulgin.co.uk