IEC CONNECTORS IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings up to 20A, 250V (UL) these connector ranges offer solutions to most mains powered equipment and cable applications. The combinations of mounting styles and terminations include: flange fixing, snap to panel and PCB mounting versions together with 2.8/solder tabs, 4.8 and 6.3 faston tabs, screw terminal and PC spill versions. Completing the range are insulating boots, retaining clips and safety covers. Type IEC Power Inlets & Connectors PX0587 Sheet C13 Rewirable PX0587/SE Sheet C13 Rewirable PX0588 Sheet C13 Rewirable PX0575 Sheet C14 Snap Fit PX0579 Sheet C14 Vertical Flange PX0580 Sheet C14 Flange/PC Mount PX0580/PC Sheet C14 PC Mount PF0001 Sheet C14 Single Fuse PF0002 Sheet C14 Single Fuse PF0011 Sheet C14 Single Fuse PF0030 Sheet C14 Twin Fuse PF0033 Sheet C14 Twin Fuse PX0597 Sheet C15 Hot Condition PX0590 Sheet C16 Hot Condition PX0595 Sheet C16 Hot Condition PX0690 Sheet C18 Flange Mount PX0691 Sheet C18 Snap Fit PF0006 Sheet C18 Single Fuse PF0007 Sheet C18 Single Fuse PF0016 Sheet C18 Single Fuse www.elektron-bulgin.com Page 76 76 76 77 78 78 79 80 80 81 82 82 83 83 83 84 84 85 85 85 Type Page IEC Power Outlets & Plug Connectors PX0685 Sheet E Rewirable PX0686 Sheet E Rewirable PX0686/SE Sheet E Rewirable PX0716 Sheet F Snap Fit PX0718 Sheet F Snap Fit PX0717 Sheet F Snap Fit PX0578 Flange Mount PX0675 Sheet F Flange Mount PX0695 Sheet F Snap Fit PX0783 Sheet F Snap Fit Shuttered PX0793 Sheet F Flange Mount Shuttered PX0793/1 Sheet F Flange Mount Shuttered PX0705 Sheet H Flange Mount PX0725 Sheet H Snap Fit 86 86 86 87 87 88 88 89 90 91 91 91 92 92 IEC Power Inlets & Connectors - High Current PX0599 Sheet C19 Rewirable PX0596 Sheet C20 Flange Mount PX0598 Sheet C20 Snap Fit 93 93 93 IEC Power Outlets - High Current PX0591 Sheet J Flange Mount PX0592 Sheet J Snap Fit PX0594 Sheet I Cable Connector Accessories 94 94 94 95-97 73 IEC CONNECTORS In addition to the standard black moulding, most styles are also available in either white or grey and special colours to match OEM equipment can also be supplied. IEC CONNECTORS IEC60320 MAINS INLETS AND OUTLETS - PANEL MOUNTING IEC CONNECTORS IEC60 320-1 IEC60 320-2-2 74 Sheet No. No. Pins Current Rating Flange Fixing Snap fit C14 3 10A, 250V a.c. PX0579 PX0580 PX0580/PC PX0580/PC/12132 PX0580/PC/7 PX0580/PC/7LC PX0575 PF0001 PX0575/PC PF0001/PC PF0002 PF0030 PF0030/PC C16 3 10A, 250V a.c. PX0590 PX0595 C18 2 10A, 250V a.c. PX0690 PX0691 PF0006 PX0691/PC PF0007 C20 3 16A, 250V a.c. PX0596 PX0598 Sheet No. No. Pins Current Rating Flange Fixing Snap fit F 3 10A, 250V a.c. PX0675 PX0675/PC PX0675/PC/12599 PX0793 (Shuttered) PX0793/1 (Shuttered) PX0695 PX0695/PC PX0783 (Shuttered) PX0716 PX0717 PX0718 H 2 10A, 250V a.c. PX0705 PX0725 J 3 16A, 250V a.c. PX0591 PX0592 Fused Flange Fused Snap fit PF0011 PF0011/PC PF0033 Filtered Fused Filtered PS00 PS01 PS20 PS21 PS25 PS26 PF0016 Fused Flange Fused Snap fit Filtered Fused Filtered www.elektron-bulgin.com IEC CONNECTORS IEC60320 MAINS CONNECTORS & PLUG CONNECTORS - CABLE MOUNTING IEC60 320-1 Current Rating Rewirable Side Entry Rewirable C13 3 10A, 250V a.c. PX0587 PX0588 PX0587/SE C15 3 10A, 250V a.c. PX0597 C19 3 16A, 250V a.c. PX0599 Sheet No. No. Pins Current Rating Rewirable Side Entry Rewirable E 10A, 250V a.c. PX0686 PX0685 PX0686/SE 3 IEC CONNECTORS IEC60 320-2-2 Sheet No. No. Pins www.elektron-bulgin.com 75 IEC CONNECTORS EN60 320-1 Standard Sheet C13 Class I Rewirable Cold Condition STRAIGHT FEMALE CONNECTOR ᔢ ᔢ ᔢ ᔢ Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. ᔢ ᔢ ᔢ ᔢ Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. ᔢ ᔢ ᔢ ᔢ Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. PX0587 SIDE ENTRY FEMALE CONNECTOR PX0587/SE IEC CONNECTORS ANGLED FEMALE CONNECTOR PX0588 Specification PX0587/Col PX0587/SE/Col PX0588 Terminations: Screw Terminals Screw Terminals Screw Terminals Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) - Max. Rating: 10A, 250V a.c. 10A, 250V a.c. 10A, 250V a.c. Contact Resistance: <10mΩ <10mΩ <10mΩ Insulation Resistance: >10 MΩ >10 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 4.5kV. (Poles-Accessible) Parts 4kV Pole-Pole 4.5kV. (Poles-Accessible) Parts 4kV Pole-Pole 5kV. (Poles-Accessible) Parts 3.5kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Withdrawal Force: 10N (Min.) 50N (Max.) 10N (Min.) 50N (Max.) 10N (Min.) 50N (Max.) Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Clean Brass, Clean Brass, Clean PX0575, PX0579, PX0580, PF0001, PF0011, PF0030, PF0033 PX0575, PX0579, PX0580, PF0001, PF0011, PF0030, PF0033 PX0575, PX0579, PX0580, PF0001, PF0011, PF0030, PF0033 Compliant Compliant Compliant 3 3 Approvals: Accessories / Notes: Mating Inlets: 76 www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition SNAP FIT TO PANEL INLET ᔢ Fits Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8, 6.3mm Tabs or Screw Terminals ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0575/10/28 PC SNAP FIT TO PANEL INLET ᔢ Fits Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ PC Spills ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) Specification PX0575/Panel/Term/Col PX0575/Panel/PC/Col Fixing(Panel): Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /TERM (screw) P.C. Spills Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ Insulation Resistance: >10 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5kV. Poles-Panel 5.4kV Pole-Pole 5kV. Poles-Panel 5.4kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated, Screw Terms, Nickel Plated Brass: Pins, Nickel Plated. Spills, Tin Plated Accessories / Notes: P.No. 11328 (See Page 97) Standard without cover. With cover add /C to P.No. Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant 3 IEC CONNECTORS PX0575/10/PC Approvals: www.elektron-bulgin.com 77 IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition FLANGE MOUNT INLET ᔢ 2.8, 4.8, 6.3mm Tabs or Screw Terminals ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0580/28 VERTICAL FLANGE MOUNT INLET ᔢ 2.8, 4.8, 6.3mm Tabs or Screw Terminals ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) IEC CONNECTORS PX0579/28 Specification PX0580/Term/Col PX0579/Term/Col Fixing: Flange Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /TERM (screw) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ Insulation Resistance: >103 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5kV. Poles-Panel 10kV Pole-Pole 5kV. Poles-Panel 10kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated, Screw Terms, Nickel Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated Accessories / Notes: P.No. 11328, KT0006 (PX0587 only) (See Pages 95 and 97) P.No. 11328 (See Page 97) Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant Approvals: 78 www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition PC FLANGE REAR MOUNT INLET ᔢ With or Without Rear Cover ᔢ PC Spills ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0580/PC Rear View PC FLANGE REAR MOUNT INLET ᔢ ᔢ ᔢ ᔢ PX0580/PC/7 Specification PX0580/PC/Col PX0580/PC/7/Col Fixing: P.C.B./Flange P.C.B./Flange Terminations: P.C. Spills P.C. Spills Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ Insulation Resistance: >103 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5.4kV. Poles-Panel 10kV Pole-Pole 4kV. Poles-Panel 6kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Spills, Tin Plated Brass: Pins, Nickel Plated. Spills, Tin Plated Accessories / Notes: Standard without cover. With cover add /12132 to P.No. Standard with cover. Without cover add LC to P.No. Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant IEC CONNECTORS Rear View With or Without Cover PC Spills 4.8mm Top Tab (earth) 10A, 250V a.c. (15A, 250V a.c. UL & CSA) Approvals: www.elektron-bulgin.com 79 IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition (Fused) FLANGE MOUNT FUSED INLET ᔢ ᔢ ᔢ ᔢ ᔢ Single Fuse 5 x 20mm Spare Fuse Facility 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. Fuse Contacts Isolated (PF0002) ᔢ ᔢ ᔢ ᔢ Single Fuse 5 x 20mm Spare Fuse Facility PC Spills - Horizontal 10A, 250V a.c. PF0001/28 PF0002/28 PC FLANGE MOUNT FUSED INLET IEC CONNECTORS PF0001/PC Specification PF0001/Term/Col PF0001/PC/Col PF0002/Term/Col Fixing: Flange P.C.B./Flange Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) P.C. Spills /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. 10A, 250V a.c. 10A, 250V a.c. Max. Fuse Rating: 2.5W/10A, 250V a.c. 2.5W/10A, 250V a.c 2.5W/10A, 250V a.c Contact Resistance: <10mΩ (<15mΩ including Fuseholder) <10mΩ (<15mΩ including Fuseholder) <10mΩ Insulation Resistance: >103 MΩ >103 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated P.No. 11987, KT0009 (See Pages 95 & 97) KT0009 (front of panel mounting only) (See Page 95) P.No. 11987, KT0009 (See Pages 95 & 97) (Note: Fuse contact isolated) Approvals: Accessories / Notes: Mating Connectors: 80 PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant Compliant www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition (Fused) SNAP FIT TO PANEL FUSED INLET ᔢ Single Fuse 5 x 20mm ᔢ Spare Fuse Facility ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. PF0011/10/28 PC SNAP FIT TO PANEL FUSED INLET ᔢ Single Fuse 5 x 20mm ᔢ Spare Fuse Facility ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ PC Spills ᔢ 10A, 250V a.c. Specification PF0011/Panel/Term/Col PF0011/Panel/PC/Col Fixing(Panel): Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) P.C. Spills Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. 10A, 250V a.c. Max. Fuse Rating: 2.5W/10A, 250V a.c 2.5W/10A, 250V a.c Contact Resistance: <10mΩ (<15mΩ including Fuseholder) <10mΩ (<15mΩ including Fuseholder) Insulation Resistance: >103 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Spills, Tin Plated IEC CONNECTORS PF0011/10/PC Approvals: Accessories / Notes: P.No. 11987 (See Page 97) Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant www.elektron-bulgin.com 81 IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition (Fused, Twin) FLANGE MOUNT FUSED INLET ᔢ Twin Fused 5 x 20mm ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. PF0030/28 PC FLANGE MOUNT FUSED INLET ᔢ Twin Fused 5 x 20mm ᔢ PC Spills ᔢ 10A, 250V a.c. PF0030/PC IEC CONNECTORS SNAP FIT TO PANEL FUSED INLET ᔢ Twin Fused 5 x 20mm ᔢ Fits Panel Sizes 1.0, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. PF0033/10/28 Specification PF0030/Termination PF0030/PC PF0033/Panel/Termination Fixing (Panel): Flange P.C.B/Flange Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) P.C. Spills /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) Max. Rating: 10A, 250V a.c. 10A, 250V a.c. 10A, 250V a.c. Contact Resistance: <15mΩ (per pole) <15mΩ (per pole) <15mΩ (per pole) Insulation Resistance: >10 MΩ >10 MΩ >104 MΩ A.C. Breakdown: Pole-Pole 6kV. Poles-Panel 5kV Pole-Pole 6kV. Poles-Panel 5kV Pole-Pole 6kV. Poles-Panel 5kV 2.5W 2.5W 4 Max. Dissipation Per Fuse: 2.5W 4 Operating Temp. Range: –20˚C to +70˚C –20˚C to +70˚C –20˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated Approvals: Accessories / Notes: KT0009 (See Page 95) Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant Compliant 82 www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C15 Class I & Standard Sheet C16 Class I Hot Condition STRAIGHT FEMALE CONNECTOR ᔢ Cable Mounting ᔢ Hot Condition ᔢ Mates with PX0590 and PX0595 ᔢ Screw Terminals ᔢ 10A, 250V a.c. PX0597 FLANGE MOUNT INLET ᔢ Hot Condition ᔢ 2.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0590/28 SNAP FIT TO PANEL INLET IEC CONNECTORS ᔢ Hot Condition ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8, 6.3mm Tabs or Screw Terminals ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0595/10/28 Specification PX0597/Col Fixing (Panel): PX0590/Term/Col PX0595/Panel/Term/Col Flange Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: Screw Terminals /28 (2.8mm solder), /63 (6.3mm tab) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /TERM (screw) Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ <10mΩ Insulation Resistance: >103 MΩ >103 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 4.5kV. Poles-Accessible Parts 4kV Pole-Pole 5kV. Poles-Panel 10kV Pole-Pole 5kV. Poles-Panel 5.4kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C +120˚C +120˚C Nylon, Flammability Rating UL94V-0 Max. Pin Temp.: Withdrawal Force: 10N (Min.) 50N (Max.) Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Clean Brass, Pins Nickel Plated. Tabs, Tin Plated Brass, Pins Nickel Plated. Tabs, Tin Plated Approvals: Accessories/Notes: Mating Connectors: www.elektron-bulgin.com P.No. 11328, KT0006 (See Pages 95 & 97) P.No. 11328 (See Page 97) PX0590, PX0595 PX0597 PX0597 Compliant Compliant Compliant 83 IEC CONNECTORS EN60 320-1 Standard Sheet C18 Class II Cold Condition FLANGE MOUNT INLET ᔢ Two Pin Class II (No Earth Pin) ᔢ 2.8, 4.8, 6.3mm Tabs or Screw Terminals ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0690/28 SNAP FIT TO PANEL INLET PX0691/10/28 ᔢ Two Pin Class II (No Earth Pin) ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8, 6.3mm Tabs or Screw Terminals ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) IEC CONNECTORS PC SNAP FIT TO PANEL INLET ᔢ Two Pin Class II (No Earth Pin) ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ PC Spills ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0691/10/PC Specification PX0690/Term/Col PX0691/Panel/Term/Col PX0691/Panel/PC/Col Fixing(Panel): Flange Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /TERM (screw) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /TERM (screw) P.C. Spills Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ <10mΩ Insulation Resistance: >10 MΩ >10 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5kV. Poles-Panel 10kV Pole-Pole 5kV. Poles-Panel 5.4kV Pole-Pole 5kV. Poles-Panel 5.4kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated, Screw Terms, Nickel Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated, Screw Terms, Nickel Plated Brass: Pins, Nickel Plated. Spills, Tin Plated P.No. 11328 (See Page 97) P.No. 11328 (See Page 97) Standard without cover. With cover add /C to P.No. Compliant Compliant Compliant 3 3 Approvals: Accessories / Notes: Mating Connectors: 84 www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C18 Class II Cold Condition (Fused) FLANGE MOUNT FUSED INLET ᔢ Single Fuse 5 x 20mm ᔢ Two Pin Class II (No Earth Pin) ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. PF0006/28 FLANGE MOUNT FUSED INLET ᔢ Single Fuse 5 x 20mm (Fuse Contacts Isolated) ᔢ Two Pin Class II (No Earth Pin) ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. PF0007/28 SNAP FIT TO PANEL FUSED INLET IEC CONNECTORS ᔢ Single Fuse 5 x 20mm ᔢ Two Pin Class II (No Earth Pin) ᔢ Fits Panel Sizes 1.0, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. PF0016/10/28 Specification PF0006/Term/Col PF0007/Term/Col PF0016/Panel/Term/Col Fixing (Panel): Flange Flange Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. 10A, 250V a.c. 10A, 250V a.c. Contact Resistance: <10mΩ (<15mΩ including Fuseholder) <10mΩ <10mΩ (<15mΩ including Fuseholder) Insulation Resistance: >103 MΩ >103 MΩ >103 MΩ A.C. Breakdown: Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Pole-Pole 5.5kV. Poles-Panel 4kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: +70˚C +70˚C +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated Brass: Pins, Nickel Plated. Tabs, Tin Plated P.No. 11987 (See Page 97) P.No. 11987 (See Page 97) (Note: Fuse contacts isolated) P.No. 11987 (See Page 97) Compliant Compliant Compliant Approvals: Accessories / Notes: Mating Connectors: www.elektron-bulgin.com 85 IEC CONNECTORS EN60 320-2-2 Standard Sheet E Class I Rewirable ANGLED MALE CONNECTOR ᔢ ᔢ ᔢ ᔢ ᔢ Cable Mounting Four Position Cable Entry Rewirable Screw Terminals 10A, 250V a.c. ᔢ ᔢ ᔢ ᔢ Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. ᔢ ᔢ ᔢ ᔢ Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. PX0685 STRAIGHT MALE CONNECTOR PX0686 IEC CONNECTORS SIDE ENTRY MALE CONNECTOR PX0686/SE Specification PX0685/Col PX0686/Col PX0686/SE/Col Terminations: Screw Terminals Screw Terminals Screw Terminals Max. Rating: 10A, 250V a.c. 10A, 250V a.c. 10A, 250V a.c. Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Contact Resistance: <10mΩ <10mΩ <10mΩ Insulation Resistance: >10 MΩ >10 MΩ >104 MΩ A.C. Breakdown: Pole-Pole 5.2kV. Poles-Accessible Parts 6kV Pole-Pole 5kV. Poles-Accessible Parts 5kV Pole-Pole 5kV. Poles-Accessible Parts 5kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Withdrawal Force: 10N (Min.) 50N (Max.) 10N (Min.) 50N (Max.) 10N (Min.) 50N (Max.) Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Nickel Plated. Brass, Nickel Plated. Brass, Nickel Plated. 4 4 Approvals: Accessories / Notes: Unique octagon module allows choice of 4 cable positions Mating Outlets: PX0675, PX0695, PX0578, PX0783, PX0793, PX0793/1 PX0675, PX0695, PX0578, PX0783, PX0793, PX0793/1, PX0716, PX0717 & PX0718 PX0675, PX0695, PX0578, PX0783, PX0793, PX0793/1, PX0716, PX0717 & PX0718 Compliant Compliant Compliant 86 www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C14 Class I Cold Condition & EN60 320-2-2 Standard Sheet F Class I Cold Condtion SNAP FIT TO PANEL INLET/OUTLET ᔢ ᔢ ᔢ ᔢ Inlet/Outlet combination Panel Size1.2mm 4.8mm tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0716/48 SNAP FIT TO PANEL FUSED INLET/OUTLET Fixing Details Part No: ‘A’ PX0718/1 58.1 PX0718/2 82.1 PX0718/3 106.1 PX0718/4 130.1 PX0718/5 154.1 PX0718/6 178.1 ‘B’ 55.2 79.2 103.3 127.3 151.3 175.3 IEC CONNECTORS ᔢ Fused Inlet/Outlet combination ᔢ 1-6 outlet versions ᔢ Panel Size 1.5mm ᔢ Terminals: inlet: 4.8mm tabs outlet: solder tags ᔢ 10A, 250V a.c. (15A, 250V a.c. UL) ᔢ All outlet terminals linked, common earth throughout PX0718/x/xx/ST Specification PX0716/Termination PX0718/x/15/Termination Fixing: Snap fit 1.2mm accommodation Snap fit 1.5mm accommodation Terminations: /48 (4.8mm tab) /ST (outlet solder tag, inlet 4.8mm tab) Max. Rating: 10A, 250V a.c. (UL 15A, 125V a.c.) 10A, 250V a.c. (UL 15A, 250V a.c.) Insulation Resistance: >100MΩ (500V d.c., 1 min.) >100MΩ (500V d.c., 1 min.) Dielectric Strength: 2kV (50Hz, 1 min.) 2kV (50Hz, 1 min.) Operating Temp. Range: –20˚C to +70˚C –20˚C to +70˚C Max. Pin Temp.: +70ºC +70ºC Mouldings: Nylon 66, Flammability Rating UL94V-0 Glass filled Thermoplastic, UL94V-0 Contacts: Brass, Tin Plated Brass, Tin Plated Approvals: Accessories / Notes: Mates with: www.elektron-bulgin.com - - PX0587, PX0587/SE, PX0588, PX0686, PX0686/SE PX0587, PX0587/SE, PX0588, PX0686, PX0686/SE Compliant Compliant 87 IEC CONNECTORS EN60 320-2-2 Standard Sheet F Class I SNAP FIT TO PANEL OUTLET ᔢ ᔢ ᔢ ᔢ Snap Fit to Panel Panel Size 1.5mm Solder Tabs 10A, 250V a.c. (15A, 250V a.c. UL) ᔢ All Terminals Linked PX0717/x/xx/ST FLANGE MOUNT OUTLET IEC CONNECTORS ᔢ Front of Panel Mount ᔢ 6.3mm tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL) PX0578/63 Specification PX0717/x/15/Termination PX0578/Termination Fixing: Snap fit 1.5mm accommodation Flange Terminations: /ST (solder /63 (6.3mm tab) Max. Rating: 10A, 250V a.c. (UL 15A, 250v a.c.) 10A, 250V a.c. (UL 15A, 250v a.c.) Insulation Resistance: >100MΩ (500V d.c., 1 min.) >100MΩ (500V d.c., 1 min.) Dielectric Strength: 2kV (50Hz, 1 min.) 2kV (50Hz, 1 min.) Operating Temp. Range: –20˚C to +70˚C –20˚C to +70˚C Max. Pin Temp.: - - Mouldings: Glass filled Thermoplastic, UL94V-0 Glass filled Thermoplastic, UL94V-0 Contacts: Brass, Tin plated Brass, Tin plated Approvals: Accessories / Notes: Mates with: 88 - - PX0686, PX0686/SE PX0686, PX0686/SE Compliant Compliant www.elektron-bulgin.com IEC CONNECTORS EN60 320-2-2 Standard Sheet F Class I FLANGE MOUNT OUTLET ᔢ 2.8mm or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0675/28 PC FLANGE REAR MOUNT OUTLET ᔢ PC Spills ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) Specification PX0675/Term/Col PX0675/PC/Col Fixing: Flange P.C.B./Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab), /63 (6.3mm tab) P.C. Spills Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ Insulation Resistance: >104 MΩ >104 MΩ A.C. Breakdown: Pole-Pole 7kV. Poles-Panel 9kV Pole-Pole 4kV. Poles-Panel 9kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Tin Plated Brass, Tin Plated UR approval does not cover 4.8mm tab option Approvals: Accessories / Notes: P.No. 12075, KT0006, 14228 (See Pages 95-97) Standard without cover. With cover add /12599 to P.No., 14228 (see page 96) Mates with: PX0685, PX0686, PX0686/SE PX0685, PX0686, PX0686/SE Compliant Compliant www.elektron-bulgin.com IEC CONNECTORS PX0675/PC 89 IEC CONNECTORS EN60 320-2-2 Standard Sheet F Class I SNAP FIT TO PANEL OUTLET ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0695/10/28 PC SNAP FIT TO PANEL OUTLET ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ PC Spills ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) IEC CONNECTORS PX0695/10/PC Specification PX0695/Panel/Term/Col PX0695/Panel/PC/Col Fixing: Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /63 (6.3mm tab) P.C. Spills Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ Insulation Resistance: >104 MΩ >104 MΩ A.C. Breakdown: Pole-Pole 7kV. Poles-Panel 9kV Pole-Pole 4kV. Poles-Panel 9kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Tin Plated Brass, Tin Plated Accessories / Notes: P.No. 12075, 14228 (See Page 96-97) P.No. 14228 (see page 96) Mates with: PX0685, PX0686, PX0686/SE, PX0685, PX0686, PX0686/SE, Compliant Compliant Approvals: 90 www.elektron-bulgin.com IEC CONNECTORS EN60 320-2-2 Standard Sheet F Class I Shuttered SNAP FIT TO PANEL OUTLET ᔢ Shuttered ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0783/10/28 FLANGE MOUNT OUTLET ᔢ Shuttered ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0793/28 RECTANGULAR FLANGE MOUNT OUTLET IEC CONNECTORS ᔢ Shuttered ᔢ Rectangular Flange Mount Outlet ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0793/1/Termination Specification PX0783/Panel/Term/Col PX0793/Term/Col PX0793/1/Term/Col Fixing: Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Flange Rectangular Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /ST (solder) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /ST (solder) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /ST (solder) Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ <10mΩ Insulation Resistance: >10 MΩ >10 MΩ >104 MΩ A.C. Breakdown: Pole-Pole 7kV. Poles-Panel 9kV Pole-Pole 7kV. Poles-Panel 9kV Pole-Pole 7kV. Poles-Panel 9kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Mouldings: Nylon, Flammability Rating UL 94V-0 Nylon, Flammability Rating UL 94V-0 Nylon, Flammability Rating UL 94V-0 Contacts: Brass, Tin Plated Brass, Tin Plated Brass, Tin Plated 4 Approvals: 4 UR approval does not cover 4.8mm tab option UR approval does not cover 4.8mm tab option UR approval only covers /ST version Accessories / Notes: P.No. 12075, 14228 (See Page 96-97) P.No. 12075, KT0006, 14228 (See Pages 95-97) P.No. 12075, KT0006, 14228 (See Pages 95-97) Mates with: PX0685, PX0686, PX0686/SE PX0685, PX0686, PX0686/SE PX0685, PX0686, PX0686/SE Compliant Compliant Compliant www.elektron-bulgin.com 91 IEC CONNECTORS EN60 320-2-2 Standard Sheet H Class II FLANGE MOUNT OUTLET ᔢ Two Pin Class II (No Earth Pin) ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0705/28 SNAP FIT TO PANEL OUTLET ᔢ Two Pin Class II (No Earth Pin) ᔢ Panel Sizes 1, 1.5, 2.0 or 3.0mm ᔢ 2.8, 4.8 or 6.3mm Tabs ᔢ 10A, 250V a.c. (15A, 250V a.c. UL & CSA) IEC CONNECTORS PX0725/10/28 Specification PX0705/Term/Col PX0725/Panel/Term/Col Fixing(Panel): Flange Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab) Colours: No suffix (Black), /WH (White), /GY (Grey) No suffix (Black), /WH (White), /GY (Grey) Max. Rating: 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.) Contact Resistance: <10mΩ <10mΩ Insulation Resistance: >104 MΩ >104 MΩ A.C. Breakdown: Pole-Pole 4kV. Poles-Panel 9kV Pole-Pole 7kV. Poles-Panel 9kV Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Tin Plated Brass, Tin Plated Approvals: Accessories / Notes: 92 UR approval does not cover 4.8mm tab option UR approval does not cover 4.8mm tab option P.No. 12075 (See Page 97) P.No. 12075 (See Page 97) Compliant Compliant www.elektron-bulgin.com IEC CONNECTORS EN60 320-1 Standard Sheet C19 Class I & Standard Sheet C20 Class I Cold Condition C19 STRAIGHT FEMALE CABLE CONNECTOR ᔢ Rewirable Screw Terminals ᔢ 16A, 250V a.c. (20A, 250V a.c. UL and CSA) ᔢ Wire Sizes (max); 3 x 2.5mm2, 3 x 12AWG ᔢ Overall cable diameter up to 12mm PX0599 C20 FLANGE MOUNT INLET ᔢ 6.3mm or 4.8mm Tabs ᔢ 16A, 250V a.c. (20A, 250V a.c. UL and CSA) PX0596 ᔢ Fits panel sizes 1, 1.5, 2.0 or 3.0mm ᔢ 6.3mm or 4.8mm Tabs ᔢ 16A, 250V a.c. (20A, 250V a.c. UL and CSA) PX0598 Specification PX0599 PX0596/Termination PX0598/Panel/Termination Fixing (Panel): - Flange Snap Fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) Terminations: Screw Terminals /63 (6.3mm tab), /48 (4.8mm tab) /63 (6.3mm tab), /48 (4.8mm tab) Max. Rating: 16A, 250V ac 20A, 250V ac UL and CSA 16A, 250V ac 20A, 250V ac UL and CSA 16A, 250V ac 20A, 250V ac UL and CSA Insulation Resistance: >5MΩ >106MΩ >106MΩ 1.5kV ac 1.5kV ac 1.5kV ac 3kV ac 3kV ac 3kV ac Operating Temp. Range: –40ºC to +70ºC –40ºC to +70ºC –40ºC to +70ºC Max. Pin Temp.: - 70ºC 70ºC Withdrawal Force: 15N Min, 60N Max. - - Mouldings: Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL 94V-0 Contacts: Brass, Clean Pins: Brass, Nickel Plated Tabs: Brass, Tin Plated Pins: Brass, Nickel Plated Tabs: Brass, Tin Plated C20 Inlets; PX0596 Flange and PX0598 Snapfit PX0599 Rewirable Connector PX0599 Rewirable Connector KT0012, P.No. 14064 (see Pages 95 & 97) P.No. 14064 (see Page 97) Compliant Compliant Dielectric Strength Between contacts: Between contacts & accessible surfaces: Approvals: Mating Connectors: Accessories: Compliant www.elektron-bulgin.com 93 IEC CONNECTORS C20 SNAP FIT TO PANEL INLET IEC CONNECTORS EN60 320-2-2 Standard Sheet J & Standard Sheet I, Class I Cold Condition FLANGE MOUNT OUTLET ᔢ Flange Mounting ᔢ 6.3mm Tabs ᔢ 16A, 250V a.c. (20A, 250V a.c., UL & CSA) PX0591/63 SNAP FIT TO PANEL OUTLET ᔢ ᔢ ᔢ ᔢ Snap Fit to Panel Panel Size 1.5mm 6.3mm Tabs 16A, 250V a.c. (20A, 250V a.c., UL & CSA) PX0592/15/63 IEC CONNECTORS STRAIGHT CABLE CONNECTOR ᔢ Re-wireable, screw terminals ᔢ 16A, 250V a.c. (20A, 250V a.c. UL & CSA) ᔢ Wire size (max.): 3 x 2.5mm2, 3 x 12 AWG ᔢ Overall cable diameter up to 12mm PX0594 Specification PX0591/Termination PX0592/15/Termination PX0594 Fixing: Flange Snap fit, 1.5mm accommodation - Terminations: /63 (6.3mm tab) /63 (6.3mm tab) Screw terminals Max. Rating: 16A, 250V a.c. (UL & CSA 20A, 250V a.c.) 16A, 250V a.c. (UL & CSA 20A, 250V a.c.) 16A, 250V a.c. (UL & CSA 20A, 250V a.c.) Insulation Resistance: >100MΩ (250V, 1 min.) >100MΩ (250V, 1 min.) >5MΩ (min) 1.5kV ac 1.5kV ac 1.5kV ac 3kV ac 3kV ac 3kV ac Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –40˚C to +70˚C Max. Pin Temp.: - - - Withdrawal Force: - - 15N Min, 60N Max. Mouldings: P.B.T., Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Nylon, Flammability Rating UL94V-0 Contacts: Brass, Tin Plated Brass, Tin Plated Brass, Nickel Plated Dielectric Strength Between contacts: Between contacts & accessible surfaces: Approvals: pending Accessories / Notes: - - - Mates with: PX0594 PX0594 PX0591, PX0592 Compliant Compliant Compliant 94 www.elektron-bulgin.com IEC CONNECTORS Accessories RETAINING CLIP ᔢ Prevents Accidental Removal ᔢ Fits flanged inlets KT0006 (Shown with PX0580 & PX0587) RETAINING CLIP ᔢ Prevents Accidental Removal ᔢ Fits fused flanged inlets KT0009 (Shown with PF0001 & PX0587) RETAINING CLIP IEC CONNECTORS ᔢ Prevents Accidental Removal ᔢ For use with PX0596 flanged inlet and PX0599 connector KT0012 (Shown with PX0596 & PX0599) Specification Material: www.elektron-bulgin.com KT0006 KT0009 KT0012 Retaining Clip to prevent accidental removal of connector. Retaining Clip to prevent accidental removal of connector. Retaining Clip to prevent accidental removal of connector. Fits: PX0580 + PX0587 PX0590 + PX0597 PX0690 + PX0587 PX0675 + PX0686 PX0793 + PX0686 PX0793/1 + PX0686 Fits: Fits: Clip: Stainless Steel, other parts Brass, Nickel Plated Clip: Stainless Steel, other parts Brass, Nickel Plated Clip: Stainless Steel, other parts Brass, Nickel Plated Compliant Compliant Compliant PF0001+ PX0587 PF0001/PC + PX0587 PF0002 + PX0587 PF0030 + PX0587 PX0596 + PX0599 95 IEC CONNECTORS Accessories BLANKING COVER INSULATION BOOT PNo 14228 PNo 14340 BLANKING COVER INSULATION BOOT PNo 14277 PNo 14317 IEC CONNECTORS ᔢ Blanking covers ᔢ Protects Front of Outlet Connector ᔢ Protects Against Accidental Electric Shock Specification ᔢ PVC Insulation Boots ᔢ Protects Rear of Connector ᔢ Protects Against Accidental Electric Shock P.No. 14228 P.No. 14277 P.No. 14340 P.No. 14317 Blanking cover for PX0578, PX0675, PX0695, PX0783, PX0793, PX0716, PX0717, PX0718 Blanking cover for PX0591, PX0592, Insulation boot for PS20, PS21, PS25, PS26 Insulation boot for PF0030, PF0033 (except /PC versions) Operating Temp. Range: –40˚C to +70˚C –40˚C to +70˚C –20˚C to +60˚C –20˚C to +60˚C Max. Working Voltage: 250V a.c. 250V a.c. 250V a.c. 250V a.c. Flash Tested: 2kV a.c. 2kV a.c. 2kV a.c. 2kV a.c. Material: Nylon Nylon P.V.C. P.V.C. Flammability Rating: UL94V-0 UL94V-0 UL94V-0 UL94V-0 Compliant Compliant Compliant Compliant 96 www.elektron-bulgin.com IEC CONNECTORS Accessories INSULATION BOOT INSULATION BOOT PNo 11328 PNo 12075 INSULATION BOOT INSULATING BOOT PNo 11987 PNo 14064 Specification P.No. 11328 P.No. 11987 P.No. 12075 P.No. 14064 Insulation boot for PX0575, PX0579, PX0580, PX0590, PX0595 Insulation boot for PF range PF0001, PF0002, PF0006, PF0007, PF0011, PF0016 (except /PC versions) Insulation boot for PX0675, PX0695, PX0705, PX0725, PX0783, PX0793, PX0793/1 (except /PC versions) Insulation boot for PX0596, PX0598 Operating Temp. Range: –20˚C to +60˚C –20˚C to +60˚C –20˚C to +60˚C –20˚C to +60˚C Max. Working Voltage: 250V a.c. 250V a.c. 250V a.c. 250V a.c. Flash Tested: 2kV a.c. 2kV a.c. 2kV a.c. 2kV a.c. Material: P.V.C. P.V.C. P.V.C. P.V.C. Flammability Rating: UL94V-0 UL94V-0 UL94V-0 UL94V-0 Compliant Compliant Compliant Compliant www.elektron-bulgin.com IEC CONNECTORS ᔢ PVC Insulation Boots ᔢ Protects Rear of Connector ᔢ Protects Against Accidental Electric Shock 97 IEC CONNECTORS IEC CONNECTORS 98 www.elektron-bulgin.com