RENESAS HD74AC367AP

HD74AC367
Hex Buffer/Driver with 3-State Output
REJ03D0271–0200Z
(Previous ADE-205-392 (Z))
Rev.2.00
Jul.16.2004
Features
• 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
• Outputs Source/Sink 24 mA
• Ordering Information
Part Name
HD74AC367AP
Package Type
Package Code Package Abbreviation Taping Abbreviation (Quantity)
DIP-16 pin
HD74AC367AFPEL SOP-16 pin (JEITA)
DP-16E, -16FV
P
—
FP-16DAV
FP
EL (2,000 pcs/reel)
HD74AC367ARPEL SOP-16 pin (JEDEC) FP-16DNV
RP
EL (2,500 pcs/reel)
HD74AC367TELL
T
ELL(2,000 pcs/reel)
TSSOP-16 pin
TTP-16DAV
Notes: 1. Please consult the sales office for the above package availability.
2. The packages with lead-free pins are distinguished from the conventional products by adding V at the end of
the package code.
Pin Arrangement
OE1
1
16 VCC
I
2
15 OE2
O
3
14 I
I
4
13 O
O
5
12 I
I
6
11 O
O
7
10 I
GND
8
9
(Top view)
Rev.2.00, Jul.16.2004, page 1 of 7
O
HD74AC367
Logic Symbol
OE
I
O
Pin Names
OE1, OE2
I
O
3-State Output: Enable Input (Active Low)
Inputs
Outputs
Truth Table
Inputs
Output
OE
I
O
L
L
L
L
H
H
X
H
Z
H
L
X
Z
:
:
:
:
High Voltage Level
Low Voltage Level
Immaterial
High Impedance
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Condition
Supply voltage
DC input diode current
VCC
IIK
–0.5 to 7
–20
V
mA
VI
20
–0.5 to Vcc+0.5
mA
V
VI = Vcc+0.5V
DC input voltage
DC output diode current
IOK
–50
50
mA
mA
VO = –0.5V
VO = Vcc+0.5V
DC output voltage
DC output source or sink current
VO
IO
–0.5 to Vcc+0.5
±50
V
mA
DC VCC or ground current per output pin
Storage temperature
ICC, IGND
Tstg
±50
–65 to +150
mA
°C
VI = –0.5V
Recommended Operating Conditions
Item
Supply voltage
Input and Output voltage
Operating temperature
Input rise and fall time
(except Schmitt inputs)
VIN 30% to 70% VCC
Rev.2.00, Jul.16.2004, page 2 of 7
Symbol
VCC
2 to 6
Ratings
V
Unit
VI, VO
Ta
0 to VCC
–40 to +85
V
°C
tr, tf
8
ns/V
Condition
VCC = 3.0V
VCC = 4.5 V
VCC = 5.5 V
HD74AC367
DC Characteristics
Item
Input Voltage
Symbol
VIH
VIL
Output voltage
VOH
VOL
Ta = 25°°C
Vcc
(V)
3.0
min.
2.1
typ.
1.5
max.
—
Ta = –40 to
+85°°C
min.
max.
2.1
—
4.5
5.5
3.15
3.85
2.25
2.75
—
—
3.15
3.85
—
—
3.0
4.5
—
—
1.50
2.25
0.9
1.35
—
—
0.9
1.35
5.5
3.0
—
2.9
2.75
2.99
1.65
—
—
2.9
1.65
—
4.5
5.5
4.4
5.4
4.49
5.49
—
—
4.4
5.4
—
—
3.0
4.5
2.58
3.94
—
—
—
—
2.48
3.80
—
—
5.5
3.0
4.94
—
—
0.002
—
0.1
4.80
—
—
0.1
4.5
5.5
—
—
0.001
0.001
0.1
0.1
—
—
0.1
0.1
3.0
4.5
—
—
—
—
0.32
0.32
—
—
0.37
0.37
Unit
V
Condition
VOUT = 0.1 V or VCC –0.1 V
VOUT = 0.1 V or VCC –0.1 V
V
VIN = VIL or VIH
IOUT = –50 µA
VIN = VIL or VIH
IOH = –12 mA
IOH = –24 mA
IOH = –24 mA
VIN = VIL or VIH
IOUT = 50 µA
VIN = VIL or VIH
IOL = 12 mA
IOL = 24 mA
Input leakage
current
IIN
5.5
5.5
—
—
—
—
0.32
±0.1
—
—
0.37
±1.0
µA
VIN = VCC or GND
3 State current
IOZ
5.5
—
—
±0.5
—
±5.0
µA
IOLD
5.5
—
—
—
86
—
mA
VIN(OE) = VIL, VIH
VIN = VCC or GND
VOUT = VCC or GND
VOLD = 1.1 V
IOHD
ICC
5.5
5.5
—
—
—
—
—
8.0
–75
—
—
80
mA
µA
VOHD = 3.85 V
VIN = VCC or ground
Dynamic output
current*
Quiescent supply
current
IOL = 24 mA
*Maximum test duration 2.0 ms, one output loaded at a time.
AC Characteristics
Ta = +25°C
CL = 50 pF
Ta = –40°C to +85°C
CL = 50 pF
tPLH
VCC (V)*1
Min
3.3
1.0
Typ
7.0
Max
9.0
1.0
Max
10.0
ns
tPHL
5.0
3.3
1.0
1.0
5.0
7.0
7.0
9.0
1.0
1.0
7.5
10.0
ns
Enable time
tZH
5.0
3.3
1.0
1.0
5.0
9.0
7.0
12.5
1.0
1.0
7.5
13.0
ns
Enable time
tZL
5.0
3.3
1.0
1.0
7.0
10.0
9.0
12.5
1.0
1.0
9.5
13.5
ns
Disable time
tHZ
5.0
3.3
1.0
1.0
8.0
9.5
10.0
12.0
1.0
1.0
10.5
12.5
ns
tLZ
5.0
3.3
1.0
1.0
7.5
9.0
10.0
12.5
1.0
1.0
10.5
13.5
ns
5.0
1.0
7.0
10.0
1.0
10.5
Item
Propagation delay
Propagation delay
Disable time
Note:
Symbol
1. Voltage Range 3.3 is 3.3 V ± 0.3 V
Voltage Range 5.0 is 5.0 V ± 0.5 V
Rev.2.00, Jul.16.2004, page 3 of 7
Min
Unit
HD74AC367
Capacitance
Item
Input capacitance
Power dissipation capacitance
Rev.2.00, Jul.16.2004, page 4 of 7
Symbol
CIN
CPD
Typ
4.5
45.0
Unit
pF
pF
Condition
VCC = 5.5 V
VCC = 5.0 V
HD74AC367
Package Dimensions
As of January, 2003
Unit: mm
19.2
20.32 Max
9
6.3
7.4 Max
16
1
8
0.48 ± 0.1
2.54 ± 0.25
2.54 Min 5.06 Max
0.51 Min
1.3
0.89
7.62
+ 0.1
0.25 – 0.05
0˚ – 15˚
Package Code
JEDEC
JEITA
Mass (reference value)
DP-16E
Conforms
Conforms
1.05 g
Unit: mm
19.2
20.32 Max
9
6.3
7.4 Max
16
1
8
*0.48 ± 0.08
2.54 Min 5.06 Max
2.54 ± 0.25
1.3
0.51 Min
0.89
7.62
*0.25 ± 0.06
0˚ – 15˚
*NI/Pd/AU Plating
Rev.2.00, Jul.16.2004, page 5 of 7
Package Code
JEDEC
JEITA
Mass (reference value)
DP-16FV
Conforms
Conforms
1.05 g
HD74AC367
As of January, 2003
Unit: mm
10.06
10.5 Max
9
1
8
1.27
*0.40 ± 0.06
0.20
7.80 +– 0.30
1.15
0 ˚ – 8˚
0.10 ± 0.10
0.80 Max
*0.20 ± 0.05
2.20 Max
5.5
16
0.70 ± 0.20
0.15
0.12 M
Package Code
JEDEC
JEITA
Mass (reference value)
*Ni/Pd/Au plating
FP-16DAV
—
Conforms
0.24 g
As of January, 2003
Unit: mm
9.9
10.3 Max
9
1
8
0.635 Max
*0.40 ± 0.06
0.15
*0.20 ± 0.05
1.27
0.11
0.14 +– 0.04
1.75 Max
3.95
16
0.10
6.10 +– 0.30
1.08
0˚ – 8˚
+ 0.67
0.60 – 0.20
0.25 M
*Ni/Pd/Au plating
Rev.2.00, Jul.16.2004, page 6 of 7
Package Code
JEDEC
JEITA
Mass (reference value)
FP-16DNV
Conforms
Conforms
0.15 g
HD74AC367
As of January, 2003
Unit: mm
4.40
5.00
5.30 Max
16
9
1
8
0.65
*0.20 ± 0.05
1.0
0.13 M
Rev.2.00, Jul.16.2004, page 7 of 7
*0.15 ± 0.05
1.10 Max
*Ni/Pd/Au plating
0.10
0.07 +0.03
–0.04
6.40 ± 0.20
0.65 Max
0˚ – 8˚
0.50 ± 0.10
Package Code
JEDEC
JEITA
Mass (reference value)
TTP-16DAV
—
—
0.05 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0