ESD Protection diode RSB6.8CS zApplication ESD Protection, bi direction zLand size figure (Unit : mm) zDimensions (Unit : mm) 0.45 0.55 0.45 0.5 zFeatures 1) Ultra small mold type. (VMN2) 2) High reliability. 3) Bi chip-mounter, automatic mounting is possible. VMN2 zConstruction Silicon epitaxial planar zStructure zTaping specifications(Unit : mm) zAbsolute maximum ratings (Ta=25°C) Parameter Symbol Peak pulse power (tp=10×1000us) Ppk Power dissipation P Junction temperature Tj Storage temperature Tstg Operating temperature Topor zElectrical characteristics (Ta=25°C) Parameter Symbol Zener voltage Vz Reverse current IR Capacitance between terminals Ct www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. Limits 10 100 150 -55 to +150 -55 to +150 Min. 5.78 - Typ. 15 1/2 Unit W mW °C °C °C Max. 7.82 0.5 - Unit V µA pF Conditions IZ=1mA VR=3.5V VR=0V , f=1MHz 2009.12 - Rev.A RSB6.8CS Data Sheet zElectrical characteristics curves 10000 1 Ta=150°C 100 Ta=125°C f=1MHz 0.1 0.01 Ta=150°C 0.001 Ta=25°C Ta=125°C Ta=75°C 10 1 Ta=25°C 0.1 Ta=-25°C 0.01 0.001 0.00001 0.0001 1 2 3 4 5 6 7 8 1 0 9 1 1.5 2 2.5 3.5 0 6.8 6.7 6.6 6.5 Ta=25°C VR=3.5V n=30pcs 8 7 6 5 4 3 2 AVE:6.693V AVE:0.9344n A 1 0 6.4 Vz DISRESION MAP 1000 1 1.5 2 2.5 3 3.5 50 9 REVERSE CURRENT : IR(nA) Ta=25°C Iz=1mA n=30pcs 0.5 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 10 6.9 TRANSIENT THAERMAL IMPEDANCE : Rth (°C/W) 3 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS ZENER VOLTAGE : Vz(mV) Vz-Iz CHARACTERISTICS ZENER VOLTAGE : Vz(Ｖ) 0.5 CAPACITANCE BETWEENTERMINALS : Ct(pF) 0 10 0.0001 Ta=-25°C Ta=75°C 100 CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT : IR (nA) ZENER CURRENT : Iz(mA) 1000 Ta=25°C f=1MHz VR=0V n=10pcs 45 40 35 30 25 20 15 10 AVE:14.95pF 5 0 IR DISRESION MAP Ct DISRESION MAP Rth(j-a) Rth(j-c) 100 Mounted on epoxy board IF=100mA IM=10mA 1ms time 300 10 0.001 0.01 0.1 1 10 100 TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 1000 2/2 2009.12 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A